55-075-17-43 Bottle Cap, 17mm (Clearance)

Description
Details
Product Reviews

Description

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Questions? E-mail us for friendly, expert help!

Details

Sold by:	hundred
Color:	Chrome Plated
Size:	17mm
Additional Info:	100 per pack
Country of Origin:	United States

Product Reviews

Silver Plated Bezel Cup, Square, 17mm, 1 Loop (12 Pieces)

$2.44

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

Out of stock

Glass Vial Information Three-piece sets: a vial, a rubber stopper and a silver-plated cap. Use superglue to attach the cap. For oils and other liquids, use the stopper. These can be used to display grains of rice, small gemstone chips, gold flakes, spices, volcanic ash, etc. When writing on rice, jasmine rice is recommended. Use a fine-tip, waterproof and fade-proof pen from an art store, or the fine arts department of a craft store. 0.005 is a good line width for the pen. Baby oil is commonly used as the liquid for rice vials. It is often dyed with food coloring. Sizes listed are approximate and include cap, which adds about 6mm to height. The loop has a 2.5mm hole; fits rattail, leather, etc. The top of the glass tube is sometimes a bit rough. These are handmade, so expect some variance in size and shape. You only need to use the rubber stopper for spillable materials. Although the stopper fits well inside the vial, its top is a bit wide for the metal cap; to use the stopper, you might need to snip a bit off the edges of the top (wire cutters work well). See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Bottle Charm, Glass Vial, Cognac Bottle (10 Pieces)

$5.10

Glass Vial Information Three-piece sets: a vial, a rubber stopper and a silver-plated cap. Use superglue to attach the cap. For oils and other liquids, use the stopper. These can be used to display...

Out of stock

Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about 1/3 of the way from the tip of your pliers, with about 8mm of wire. Use round needle-nose pliers. If using an eye pin, decide which way you want the loop to go - the same direction as the premade loop on the other end, or 90º off. Keep this direction in mind as you bend the rest of the wire. Cut off any excess wire (we suggest retaining 8mm above the top of your beads). Grip the pin just above the top bead (at the arrow above), and bend the wire sharply toward you. Grasp the tip of the wire with pliers, and bend smoothly away from you, around the pliers. Wrapped Loops Use chain-nose pliers to grasp the wire just above the top of the bead. Use your fingers to bend the wire sharply over the top of the pliers, at a 90° angle. You should have 2-3mm of straight wire between the bead and the bend. Use round-nose pliers to grasp a spot just above the bend, and use your fingers to smoothly bend the wire all the way around the tip of the pliers. Now use pliers to grasp the wire firmly across the loop. Use your fingers or chain-nose pliers to carefully wrap the wire around the stem. For best control, experts recommend you break this step into a series of half wraps. Trim excess with flush cutters. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Antiqued Pewter Plated Head Pin, 2", Bead-Cap End (100 Pieces)

$6.75

Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...

Out of stock

Which Glue is Best? For the most durable bond, we almost always recommend epoxies rather than other types of glue, but it depends on a few factors... Check out the options, plus tips for successful glue bonds, on our Adhesives and Jewelry Glues page. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Silver Plated Pendant Finding, Square, 17mm (12 Pieces)

$1.60

Which Glue is Best? For the most durable bond, we almost always recommend epoxies rather than other types of glue, but it depends on a few factors... Check out the options, plus tips for successful...

Quantity:

Add to Cart

How to set Rapid Rivets, TierraCast rivets and other popular 2-part rivets for leather:Punch and layer the components to be riveted, run the rivet stem through the layers, and set on an anvil or block. Use a brass hammer to strike the rivet cap or setting tool firmly, but not so hard that you bend the rivet. Check to make sure it's secure. (Tap firmly again if it's not.) See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

1/8" Double Cap Rivet, Small, for Leaather - Black Gunmetal (100 Pieces)

$6.12

How to set Rapid Rivets, TierraCast rivets and other popular 2-part rivets for leather:Punch and layer the components to be riveted, run the rivet stem through the layers, and set on an anvil or...

Out of stock

Bottle Cap, 17mm (100 Pieces)

Bulk discount rates

Frequently Bought Together:

Description

Details

Product Reviews

Bottle Cap, 17mm (100 Pieces)

Write a Review

Bottle Cap, 17mm (100 Pieces)

Bulk discount rates

Frequently Bought Together:

Description

Details

Product Reviews

Related Products