117 results for '86-915'

News & Information (115)

Winged Heart Brooch Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUse two-part epoxy to glue two magnets to the back of the BRONZclay™ piece.Two earring magnets and backings make for a secure hold on clothing.When not being w ...

Skullhead Barrette Tutorial(Post)

Created by: Rita Hutchinson Designer Tips Cut your metal sheet to desired size and use a file to round the corners and smooth all edges.Clean with Penny Brite® Copper Cleaner and scrubby un ...

Fleur de Bee Pendant - Necklace Tutorial(Post)

Created by: Sondra BarringtonDesigner TipsPatina the bee and darken the frame with Win-Ox™.Apply wax to seal the pieces, after you have achieved desired patina effect.Attach the bee and filigree usin ...

Pumpkin Harvest Earrings Tutorial(Post)

Created by: Sondra BarringtonDesigner TipsUse a tapered flush-cutter to trim the loop off leaf charm to shorten stem. Create a new loop that is closer to the leaves of the charm.Create a small coil o ...

Live With Intention Cuff Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsStamp favorite quotes on inexpensive easy-to-use strips of precut copper, then rivet them to sturdy brass cuff bracelets. If you make a mistake when stamping ...

A Dog's Night Out Collar Tutorial(Post)

Created by: Valorie Nygaard-PouzarDesigner TipsWhether it be the park or the opera, your pooch will prance in style with this custom and personalized doggie necklace.Determine the total length of the ...

Cities in Bloom Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsUse a permanent marker to draw a few clouds in the sky, and tufts of grass on the ground. (After etching, I thought my tufts of grass looked more like a city ...

Pleasant Dream Etched Barrette Tutorial(Post)

 Created by: Rita Hutchinson Designer TipsCut your metal sheet to desired size and use a file to round the corners and smooth all edges.Clean with Penny Brite® Copper Cleaner and scrubby un ...

A Mustache For Your Wrist Cuff Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsAdjust bracelet to target wrist size/shape, because once the 2nd layer is riveted on, you will have limited adjustability.Texture or stamp the bracelet and/o ...

Gear Head Bobby Pin Tutorial(Post)

 Created by: Polly Nobbs-LaRue Designer Tips Always wear safety glasses when cutting, drilling or punching.The bobby pin is a little heavier gauge than recommended for the punch, so us ...

Merry Tag Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsClean the door blanks in a tumbler for 2-3 hours, or with fine-grit sandpaper and a polishing cloth.Find a pleasing portion of the Christmas tin, that fits ...

Christmas Tree Window Tutorial(Post)

Created by: Polly Nobbs LaRue Designer TipsClean the door blanks with fine-grit sandpaper and a polishing cloth, or in a tumbler for 2-3 hours.Find a pleasing portion of the Christmas tin, that fits ...

Arrow - Etched Copper Bracelet Tutorial(Post)

Created by: Summer MelaasDesigner TipsOptional: Punch a hole in the corner of the blank, following instructions in hole-punch below. After completing bracelet, dangle a charm or beaded dangle of your ...

Katrina Cuff Bracelet Tutorial(Post)

Learn how to colorize a textured brass cuff bracelet. Created by: Rita HutchinsonDesigner TipsCheck bracelet for fit, and adjust by hand as needed.Clean brass cuff with alcohol for best patina adhere ...

All Seeing COPPRclay® Bracelet Tutorial(Post)

Created by: Joe HentgesDesigner TipsCreate the COPPRclay centerpiece according to the manufacturer's instructions. Like most other metal clays, COPPRclay must be fired in a kiln. COPPRclay shrinks ap ...

Abstract Painted Cuffs(Post)

Created by: Guest Designer Deb FlorosSuggested Supplies 1 #51-810-05-17 Leather Cuff Bracelet, 1/2" - Lagoon (Each)1 #51-810-05-01 Leather Cuff Bracelet, 1/2" - Natural (Each)1 #51-810-05-04 Leather ...

Lady-Leg Etched Earrings Tutorial(Post)

These fun etched copper earrings were cut out with shears (a jeweler's saw would also work great) and then the resist was hand-drawn with Sharpie, in the patterns of toes and thigh-high stockings.Cre ...

Sandra Leather Bracelet Tutorial(Post)

Created by: Rita Hutchinson   Designer TipsSqueeze out a few drops of patina (or your favorite metallic acrylic paint) on the craft sheet. Apply patina to the edges of the cuff, and then dry-bru ...

Wintry Mix Ink Stamped Leather Bracelets Tutorial(Post)

Created by: Amy MickelsonDesigner TipsUse StazOn® ink and rubber stamps of your choice to create a festive bracelet in minutes.Choose from ready-made leather bracelets or leather strips.Since the Sta ...

Beachcomber Wine Glass Charm Set Tutorial(Post)

Created by: Veronica GreenwoodDesigner TipsCreate a colorful beaded drop for each wine glass marker, using gemstones or other beads of your choice. New to jewelry-making? See Basic Jewelry-Making Tec ...

Soar With Me Cuff Bracelet Tutorial(Post)

Created by: Valorie Nygaard-PouzarDesigner TipsPatina, seal and use bracelet-bending pliers to apply a gentle curve to the metal sparrow before riveting it to the leather.For hints on applying Vintaj ...

Layered Floral Earrings with Stamping Tutorial(Post)

Created by: Guest Designer Deb FlorosSuggested Supplies2  #44-722-28-0 Brass Stamping Blank, Long Oval Drop, 41mm1 #69-245-103 ImpressArt Metal Stamp, Floral Swirl1 6-piece pack #44-180-027-6 An ...

Gypsy Dancer - Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsColorize the raw brass filigrees. (See Rings & Things blog post "Jewelry DIY - Colorizing Raw Brass Filigrees" for instructions.)Make a bead dangle and atta ...

Paisley Palette Pin Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsFor best placement of the holes, make a template: Trace the outline of the paisley on a piece of paper (a Post-it® works great!), then use a pencil to sketc ...

Emma Dog Tag Tutorial(Post)

Emma is in our warehouse daily, and I wanted to honor her with some Jewelry.Created by: Rita HutchinsonDesigner TipsNew to stamping? See Metal Stamping 101.The 3mm Bridgette stamp set allowed a long ...

Victoria - Etched Earrings Tutorial(Post)

Created by: Summer MelaasDesigner TipsEtch earrings (See etching tutorial below).Place cushion in cushion setting and fold over tabs using nylon-jaw pliers or a burnisher.Attach French hooks to top o ...

Page 394 Bookmark Tutorial(Post)

"Turn to Page 394" is a quote known to most Harry Potter fans. What will you put on your custom bookmarks?Created by: Rita HutchinsonDesigner TipsThe stamp guides are tremendously helpful for keeping ...

Pawrific Enamel Necklace Tutorial(Post)

Created by: Summer MelaasDesigner TipsPunch a hole in the top corners of your copper blank. File any sharp bits.Clean your blank very well with warm water and Penny Brite.Cut your 22 ga bare copper w ...

Red Bird Enameled Earrings Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsPosition and emboss pattern on blanks with the Big Shot Jewelry Studio and embossing die. (See Big Shot Embossing blog article)Counter-enamel the blank (fire t ...

Dirty Money Clip Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsClean both parts with alcohol and allow to dry. Apply flux to key points on the back of the scarab, and then apply small dots of solder to these points using s ...

Good Thoughts Barrette Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsThe original alligator clip used for this barrette is no longer available, but our new French-style barrette backs are more secure (hold better in hair) and ...

Venus Necklace Tutorial(Post)

Created by: Mollie Valente Designer TipsUsing a decorative metal stamp on a solid copper tube-top bails is an easy way to sign your work, or simply give a secret little accent to the back of a p ...

Lucky Penny Bracelet Tutorial(Post)

Created by: Tiffany White   Designer TipsFind pennies in the years of your choice.Clean the pennies with Penny Brite®.Using a permanent marker or Stamp Enamel, cover the surface of each penny in ...

Red Hot Love Bracelet Tutorial(Post)

Take our inexpensive rough-looking raw brass bracelet, and learn how easy it is to add color and a high shine! Created by: Rita HutchinsonDesigner TipsRemove age patina and minor blemishes from the b ...

Tears of an Angel Earrings Tutorial(Post)

Created by: Mandi DingmanDesigner TipsCut two 16-18" pieces of 24-gauge wire. It is better to have plenty of wire for wire-wrapping the pendants, depending on how much of the crystal you want to cove ...

Wonder Woman Riveted Cuff Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsThis bracelet is super fast and fun to make, once you have the necessary tools.The Domed Piercing Base allows you to pierce the domed bracelet without leavin ...

Avocado Dorado Cuff Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsSolder Brass Ninja Star* to Copper Disk:If the copper or brass shapes are bent, straighten them with a steel block and nylon or rawhide mallet. (Solder doesn ...

Space Needle Earrings Tutorial(Post)

Created by: Mollie Valente Designer TipsCut wire in half. File ends flat and straight before beginning to hammer, for a more symmetrical paddle head. Hammer a flat paddle on one end of the wire and f ...

Hearts Across the States Keychain Tutorial(Post)

Created by: Janet BoyingtonDesigner TipsStamp hearts in desired locations on USA blank, and then use the "." (period) from the punctuation set to connect the hearts. (New to metal stamping? See Metal ...

Industrial Ease Earrings Tutorial(Post)

Large-hole Pyrite Heishi and 14-gauge iron color Artistic Wire make these industrial-looking earrings a breeze to create.Created by: Rita HutchinsonDesigner TipsCoil wire around largest portion of wr ...

Eclipse Cuff Links Tutorial(Post)

Created by: Mollie ValenteDesigner TipsClip the loop off both moon charms, file smooth, and sand with a 600 grit polishing cloth.Use a dapping block to gently dome the moon charms.Soft solder each mo ...

Ava's Ladies in Waiting Bridesmaid Necklaces Tutorial(Post)

Created by: Valorie Nygaard-Pouzar   Designer TipsCarefully stamp the metal blank.Antique the charm so the impressions are more pronounced.Gently sand and polish.Attach to jump ring & chain.

grrrrr / breathe bracelet tutorials(Post)

Created by: Polly Nobbs-LaRueDesigner TipsUse a ruler and Sharpie to draw a dot or line in the middle if the bracelet. Write your word or phrase on a piece of paper, about the size you'll be stamping ...

Rustic Arrowhead Earrings Tutorial(Post)

Created by: Sondra BarringtonDesigner TipsSelect your favorite color of Gilder’s Paste and an accompanying (or contrasting) color crystal bead.Individuals with metal allergies can often wear niobium ...

Hidden Ecosystem Cuff Bracelet Tutorial(Post)

Created by: Cindy Morris Designer Tips Stamp, hammer and punch holes in the copper until you are satisfied.File any sharp edges.Wrap the strip around a small bottle (aspirin size works well ...

Funky Bohemian Spike Set Tutorial(Post)

Created by: Tiffany WhiteDesigner TipsCut three pieces of 20-gauge copper wire, each 6" long.Make a wrapped loop at one end of each wire.For step-by-step illustrated instructions, see our blog articl ...

It's Good to Be King Tie Bar Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCut the copper strip to about 2" in length. Use a texture hammer or pattern stamp to apply a random pattern. File the corners and sides until smooth.Soft solder ...

Moon and Stars Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsDome (or dap) the brass moon charms.Antique the brass moons with WinOx™ and polish with the "Brilliant" polishing cloth.Thread a bicone crystal and fluted bead ...

Moonshine Earrings Tutorial(Post)

Created by: Summer MelaasDesigner TipsPunch a hole in the top center of each mason jar blank (available in copper, brass and sterling silver). If desired, tumble-polish or sand the blanks to remove a ...

Impression COPPRclay Bracelet Tutorial(Post)

Created by: Sondra BarringtonDesigner TipsCreate the COPPRclay links according to the manufacturer's instructions. Like most other metal clays, COPPRclay must be fired in a kiln. COPPRclay shrinks ap ...

Pennant Pendant Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUse texture plates from the tool kit to create designs on each torch-fired metal clay pennant. Patina each with liver of sulfur.Center one of the pennants on t ...

Becoming One Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsTo make the fingerprint heart pendant, form the desired pendant shape in silver metal clay. Allow it to dry, and pre-finish, then spritz thoroughly with distil ...

Labor of Love Centerpiece(Post)

Created by: Amy MickelsonDesigner TipsSize and cut an image to fit the glass tile.Use a paintbrush to apply the Inkssentials™ Glossy Accents to seal and affix the image to back of the glass tile. Onc ...

Tri-Tone Cuff Bracelet Tutorial(Post)

Created by: Rita Hutchinson   Designer TipsUsing a pre-cut and finished bracelet blank, and precut 6" patterned wire makes this bracelet assemble in a snap!Apply pattern to copper blank with des ...

Sweet Skull Pendant Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUsing ball-end head pins, make 8 beaded loop dangles in flowery colors. Use one metal rondelle on each side of the crystal bead for fuller dangles. Wrapped loo ...

Hootie and the Sodalites Earring Tutorial(Post)

Learn how to make stamped earrings using an owl stamp, copper findings and orange sodalite gemstones.Created by: Amy MickelsonDesigner TipsChoose a metal design stamp to fit the metal blank.Use tape ...

The Imp Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsPlan out design, and stamp words and symbols. ("I Drink and I Know Things" is a quote from Game of Thrones, and the colors used here are the colors of house La ...

Slam Dunk Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner Tips Stamp player number onto the tag. (For detailed stamping instructions, see link below.)Add additional tags for multiple players, or use larger tags for team n ...

Purple and Gold Bracelet Tutorial(Post)

Created by: The R&T Showroom Team   Designer TipsStamp the tag with 3mm letter stamps. For longer team names, use a larger tag or smaller set of stamps. See Metal Stamping 101 for detailed s ...

Go Round-and-Round Enameled-Copper Earrings Tutorial(Post)

Created by: Mollie Valente Designer TipsMake two enameled copper washers. You can either use the enamel colors of your choice, or the colors listed in the suggested materials. Follow instruction ...

Mehandi Coil Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUse shears to cut flat wire. Texture as desired with texturing hammer or metal stamps.Create coil by wrapping at an angle around large barrel of bail making pl ...

Great Odin's Raven Viking Knit Bracelet Tutorial(Post)

Created by: Jaci BostonDesigner TipsFollow the instructions that come with the Lazee Daizee™ to create two Viking knit sections for the bracelet.The Lazee Daizee™ accommodates various sizes of wire.

Pulse Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsDetermine placement of vinyl heishi beads, and mark each dot with an extra-fine point Sharpie®.Punch holes in the brass blanks with the cutting end of the Cr ...

Aztec Princess Earring Tutorial(Post)

This project uses Swarovski crystals. Created by: Tiffany WhiteDesigner TipsMark all six of your triangle blanks with a permanent marker dot in one of the points and straight down on the opposite sid ...

Adjustable Necklace Extenders Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFor instructions with step-by-step photos, please see our blog article: How to Make an Adjustable Necklace Extender.Suggested Supplies1 foot (use 4") #40-011-00 ...

Transylvanian Visitor Pin Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsLaminate or seal the image with Crafter's Pick™ The Ultimate adhesive.Glue the image onto the blank "back" with the Crafter's Pick.Use side cutters to remove p ...

Goodnight Moon Pins Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsCut loops off the moon charms and file smooth.For one pin, antique the brass components and bar pin with Win-Ox™ before assembling. Allow the parts to ...

Illuminating Lotus Earrings Tutorial(Post)

Created by: Veronica GreenwoodDesigner TipsThoroughly clean your blank with Penny Brite. See our enameling blog article for tips, precautions and basic instructions for preparing the piece for enamel ...

Rose Quartz Healing Necklace Tutorial(Post)

Created by: Tiffany WhiteDesigner TipsCut 12" of wire to wrap the gemstone donut.Center the wire on the donut and wrap each side 2 times.Pinch the two wires flush together with chain-nose pliers.Use ...

Skull Kid Leather Wrapped Bracelet Tutorial(Post)

Created by: Jaci BostonDesigner TipsCreate a template from a copyright-free image.Glue your image pattern to the metal with rubber cement, and cut along the pattern with a jeweler's saw.Keep the saw ...

Noble Fir Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCreate a COPPRclay™ pendant following the manufacturer's guidelines included with the clay and your kiln.Mollie made her own pattern sheet by taking a piece of ...

Peace Bracelet Tutorial(Post)

Learn how to polish, color and add charms to an inexpensive brass bangle bracelet and turn it into a finished salable piece of jewelry. No stamping necessary!  Created by: Polly Nobbs-LaRue &nbs ...

Little Sprout Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFor step-by-step illustrated instructions showing how to engrave the pendant, see Rings & Things blog post "Jewelry Making DIY – Make a Micro Engraved Penda ...

Puppy Love Pin Tutorial(Post)

Created by: Mollie ValenteDesigner TipsThe Complete Metalsmith (#62-011) provides a useful chart for selecting saw blades. Or scroll down to the comments section of our "Tips for Sawing Sheet Metal w ...

Ava's Big Day Bridal Set Tutorial(Post)

Created by: Valorie Nygaard-Pouzar   Designer Tips  Determine placement of the stamped letters on metal charm, or paper.Carefully stamp the blank.Antique the charm so the impressions are mo ...

Cowgirl Cuff Bracelet Tutorial(Post)

Created by: Tiffany WhiteDesigner TipsUse the pein side (rounded) of your hammer to texturize the surface of the copper metal strip on the steel block.Using your metal shears, cut a 3/4 inch by 4 inc ...

In the Moment Leather Cuff Bracelet Tutorial(Post)

Created by: Mollie Valente   Designer TipsCustomize the word blank:Place the word blank on the steel block and create a dappled texture with the ball peen side of the chasing hammer.Use the brac ...

Cave Man Necklace Tutorial(Post)

Created by: Jaci BostonDesigner TipsCarefully plan the cutting pattern. The shape of these cuts creates decorative prongs or tabs to hold the gemstone slab bead.For this design draw the shape to be c ...

Go Zags - March Madness Bracelet(Post)

Created by: Summer Melaas   Designer TipsStamp the tag with 3mm letter stamps. For longer team names, use a larger tag or smaller set of stamps. See Metal Stamping 101 for detailed stamping inst ...

Crimson and Gray Bracelet Tutorial(Post)

Created by: The Rings & Things Showroom TeamDesigner TipsStamp the tag with 3mm letter stamps. For longer team names, use a larger tag or smaller set of stamps. See Metal Stamping 101 for detaile ...

Kraken Belt Buckle Tutorial(Post)

Created by: Elisabeth ValenteDesigner TipsConsider taking a jewelry-making class through a local college or art school. The Complete Metalsmith by Tim McCreight and Simple Soldering: A Beginner's Gui ...

Wedding Date Necklace Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsStamp design: If you're new to stamping, see metal stamping technique sheet.When stamping the date, keep in mind that tiny stamps require less stamping stren ...

Go Fly A Kite Enameled Earrings Tutorial(Post)

Created by: Summer Melaas Designer TipsCarefully mark spots for holes, and use smaller end of EuroTool "helicopter" punch to add holes to corners of copper blanks.Clean the blank with Penny Brit ...

Fused Spirals Earrings Tutorial(Post)

Created by: Rita Hutchinson Designer TipsLightly dome (dap) the blank in dapping block.How to Dap (Dome)Clean blank with penny brite and dry.Apply counter enamel to back of blank. Fire and allow ...

Delightfully Dotty Enameled Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsCut copper sheet to size or use a premade copper blank. If you have cut your own blank, punch hole in appropriate location and file edges to remove roughness.C ...

Dark Skies Enameled Pendant Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUse dapping block to shape blank.After dapping, punch 1/16" hole using the smaller (silver) side of a EuroTool "helicopter" punch.Clean blank with penny brite ...

Enameled Hidden Heart Tutorial(Post)

Created by: Mollie ValenteMake your Enamel DiskUse the dapping set to dome the copper blank.(See Rings & Things blog post: How to Dap and Dome Metal Jewelry.)Fire the concave (back side) of the c ...

Night Reflections Enamel Earrings Tutorial(Post)

Created by: Summer MelaasDesigner TipsUse the smaller end of the 2-hole metal punch to punch a 1/16" hole near the top of the blanks. Be sure to center it, so the earrings hang properly.Clean the bla ...

October Ombre Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsTexture and stamp the sterling heart with ribbon design stamp. New to metal stamping? See step-by-step instructions in our free Metal Stamping 101 PDF.Apply st ...

The View Necklace Tutorial(Post)

Created by: Cindy MorrisDesigner TipsStamp front piece first (I used the "l" to make diagonal lines on the window frame). Flatten. Patina with Win-Ox™ and clean with steel wool.Clean back piece with ...

Happy Hour Wine Glass Markers Tutorial(Post)

Created by: Janet BoyingtonDesigner TipsCreate stamped charms using Monogram stamp set. New to stamping? See Metal Stamping 101 for an overview, or download our step-by-step PDF stamping guide.Use St ...

Basketball Finals - DIY Team Colors Bracelet(Post)

C'est La Vie Finals BraceletWhether you defy history, or regularly make history, we've got your colors -- over 80 colors to choose from, and a nice variety of frame setting options.Created by: Polly ...

Cognitive Resonance Pendant Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsWhen scouring yard sales and 2nd-hand stores for old watches, try to pick up a wide variety of brands and eras, for the best variety of gears. Or look ...

Enameled Orchid Eye Tutorial(Post)

Created by: Mollie Valente Make your Enamel DiskUse the dapping set to dome the copper blank. (See Rings & Things blog post: How to Dap and Dome Metal Jewelry.)Fire the concave (back side) o ...

Red Light / Green Light Enamel Earrings(Post)

Your Choice: They're balloons, streetlights or lollipops!  Created by: Summer Melaas and Polly Nobbs-LaRue   Designer TipsPunch a 1/16" hole in each blank, directly opposite the existing lo ...

The North Star Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCreate a bail using a 5/16" x 3" piece of 24-gauge copper sheet: Cut, file, stamp, punch and ream the holes a bit larger. Use bail-making pliers to bend the sta ...

Fresh Pots Bracelet Tutorial(Post)

Created by: Jaci BostonDesigner TipsUse silhouettes of multiple teapots and teacups to make this design. No two are alike.Use rubber cement to glue the paper images to the metal.Saw vertically at all ...

Well Suited Barrette Tutorial(Post)

Created by: Megan Holden   Designer TipsClean bezels of barrettes with a clean, wet cloth and allow to dry.Paint the bottom of one barrette bezel with red paint, using smallest brush of Ranger s ...

Area 51 Pin Tutorial(Post)

I made this pin when the UFO and alien stamp first came out, but they are no longer in production. But there are so many other fun options for customizing this blank with features for other states! A ...

Astral Love Resin Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsSee instruction page for making no-solder bezels.Cut paper to match bezel wire shape.Seal paper and adhere to inside of bezel.Mix a small batch of resin and po ...