425 results for '69-180'

News & Information (421)

Layered Floral Earrings with Stamping Tutorial(Post)

Created by: Guest Designer Deb FlorosSuggested Supplies2  #44-722-28-0 Brass Stamping Blank, Long Oval Drop, 41mm1 #69-245-103 ImpressArt Metal Stamp, Floral Swirl1 6-piece pack #44-180-027-6 An ...

Dirty Money Clip Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsClean both parts with alcohol and allow to dry. Apply flux to key points on the back of the scarab, and then apply small dots of solder to these points using s ...

Cute as a Button Bracelet Tutorial(Post)

Created by: Claudia Crosby Designer TipsStretch and secure the bracelet ends to cardboard with tape. This prevents it from moving when gluing on the buttons.Use heavy duty hardware store cutters to r ...

Foliage Necklace Tutorial(Post)

  Created by: Rita Hutchinson   Designer Tips  Make 45 wire-wrapped loop dangles, each with a single crystal bicone. See Basic Jewelry-Making Technique Sheet (PDF)Use a jump ring ...

Crowned Bobby Pin Tutorial(Post)

Created by: Rita Hitchinson   Designer TipsUse a ready-made silicone mold of your choice or make your own mold with Amazing Mold Putty.Lightly dust the mold with metallic powder. Tap off excess.

Winter in Bermuda Bracelet Tutorial(Post)

Created by: Amy MickelsonDesigner TipsRoughen the pads on the disk and loop bracelet with sandpaper or a sanding sponge. This increases the surface texture to help the glue adhere.If desired, plan yo ...

From Bridal to Bright Shoe Clips Tutorial(Post)

Created by: Amy MickelsonDesigner TipsShoe clips work like clip-on earrings, but for shoes. Simply add or remove finished designs from footwear whenever you want to display a different mood! Create a ...

Infinite Path Bracelet Tutorial(Post)

Created by: Kameron FoxDesigner TipsThese earrings and matching bracelet were created using the step by step instructions on page 92 of Beautiful Wire Jewelry for Beaders: Creative Wirework Projects ...

Merry Tag Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsClean the door blanks in a tumbler for 2-3 hours, or with fine-grit sandpaper and a polishing cloth.Find a pleasing portion of the Christmas tin, that fits ...

Infinite Path Earrings Tutorial(Post)

Created by: Kameron FoxDesigner TipsThese earrings and matching bracelet were created using the step by step instructions on page 92 ofBeautiful Wire Jewelry for Beaders: Creative Wirework Projects f ...

Page 394 Bookmark Tutorial(Post)

"Turn to Page 394" is a quote known to most Harry Potter fans. What will you put on your custom bookmarks?Created by: Rita HutchinsonDesigner TipsThe stamp guides are tremendously helpful for keeping ...

Kraken Belt Buckle Tutorial(Post)

Created by: Elisabeth ValenteDesigner TipsConsider taking a jewelry-making class through a local college or art school. The Complete Metalsmith by Tim McCreight and Simple Soldering: A Beginner's Gui ...

Witchy Necklace Tutorial(Post)

Created by: Jaci BostonDesigner TipsKeep the saw blade well lubricated to create ease while sawing.To avoid breaking your blades, keep the saw upright, without tilting, while you're sawing.For perfec ...

Geared Ring Tutorial(Post)

 Created by: Polly Nobbs-LaRue Designer TipsCut a strip of 20-gauge sheet 2.75" long. Smooth and straighten with a nylon hammer.Optional: Texture or stamp (see "How to Make a Metal-Stamped ...

All Seeing COPPRclay® Bracelet Tutorial(Post)

Created by: Joe HentgesDesigner TipsCreate the COPPRclay centerpiece according to the manufacturer's instructions. Like most other metal clays, COPPRclay must be fired in a kiln. COPPRclay shrinks ap ...

The View Necklace Tutorial(Post)

Created by: Cindy MorrisDesigner TipsStamp front piece first (I used the "l" to make diagonal lines on the window frame). Flatten. Patina with Win-Ox™ and clean with steel wool.Clean back piece with ...

Christmas Tree Window Tutorial(Post)

Created by: Polly Nobbs LaRue Designer TipsClean the door blanks with fine-grit sandpaper and a polishing cloth, or in a tumbler for 2-3 hours.Find a pleasing portion of the Christmas tin, that fits ...

Red Bird Enameled Earrings Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsPosition and emboss pattern on blanks with the Big Shot Jewelry Studio and embossing die. (See Big Shot Embossing blog article)Counter-enamel the blank (fire t ...

Fold-Formed Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsJewelry Lab: 52 Experiments, Investigations and Explorations in Metal has a great tutorial on fold forming. Plus of course, Charles Lewton-Brain's book Foldf ...

Puppy Love Pin Tutorial(Post)

Created by: Mollie ValenteDesigner TipsThe Complete Metalsmith (#62-011) provides a useful chart for selecting saw blades. Or scroll down to the comments section of our "Tips for Sawing Sheet Metal w ...

Sun Valley Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsMeasure and mark the hanging hole placement near the upper corners of the half-round blanks. These should be set back from the edge about 1/16".Use the hole pun ...

Northern Copperhead Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Make 6 equal sized coils u ...

A Dog's Night Out Collar Tutorial(Post)

Created by: Valorie Nygaard-PouzarDesigner TipsWhether it be the park or the opera, your pooch will prance in style with this custom and personalized doggie necklace.Determine the total length of the ...

Impression COPPRclay Bracelet Tutorial(Post)

Created by: Sondra BarringtonDesigner TipsCreate the COPPRclay links according to the manufacturer's instructions. Like most other metal clays, COPPRclay must be fired in a kiln. COPPRclay shrinks ap ...

Aurora Sprinkles Earrings Tutorial(Post)

Created by: Rita Hutchinson   Designer TipsCut bezel strip to size (one 8-12" piece) and flatten/ work harden with nylon hammer.Add texture to both sides of bezel strip with texture stamping ham ...

Live With Intention Cuff Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsStamp favorite quotes on inexpensive easy-to-use strips of precut copper, then rivet them to sturdy brass cuff bracelets. If you make a mistake when stamping ...

Pleasant Dream Etched Barrette Tutorial(Post)

 Created by: Rita Hutchinson Designer TipsCut your metal sheet to desired size and use a file to round the corners and smooth all edges.Clean with Penny Brite® Copper Cleaner and scrubby un ...

Poppy Field Pendant Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsSelect and clean two matching glass pieces.Select an image and cut it to match the glass shape and size.Carefully wrap the glass with copper-foil tape. To creat ...

2 Easy Celtic Knot Bracelets Tutorial(Post)

These bracelets are almost too easy!  Created by: Polly Nobbs-LaRueDesigner TipsSet the TierraCast Rivetable or Link in the center of the leather bracelet and use a fine-point permanent mar ...

DIY Adjustable Bangle Bracelet Tutorial(Post)

This style of bracelet is a great one-size-fits-all design. OK, so technically the same bracelet size won't fit both a petite 6-year-old and a Samoan warrior, but odds are that you can determine one ...

Patterned Wire Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRue   Designer TipsMeasure, mark and cut patterned wire to desired length.File ends smooth with slightly rounded corners, so the wire pieces match the curve of the disk ...

Enameled Orchid Eye Tutorial(Post)

Created by: Mollie Valente Make your Enamel DiskUse the dapping set to dome the copper blank. (See Rings & Things blog post: How to Dap and Dome Metal Jewelry.)Fire the concave (back side) o ...

Pawrific Enamel Necklace Tutorial(Post)

Created by: Summer MelaasDesigner TipsPunch a hole in the top corners of your copper blank. File any sharp bits.Clean your blank very well with warm water and Penny Brite.Cut your 22 ga bare copper w ...

Go West Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsMaking the Pendant:Cut the handle loop of the heart charm and file smooth.Mark hole locations with a Sharpie®, and use the hole punch to make two 1/16th-inch ha ...

REACH Stamped Aluminum Cuff Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsTo get a feel for the aluminum, firmly stamp the star in a few spots. For a detailed tutorial on metal stamping, see Metal Stamping 101 (PDF).Stamp the word ...

Goodnight Moon Pins Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsCut loops off the moon charms and file smooth.For one pin, antique the brass components and bar pin with Win-Ox™ before assembling. Allow the parts to ...

The Imp Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsPlan out design, and stamp words and symbols. ("I Drink and I Know Things" is a quote from Game of Thrones, and the colors used here are the colors of house La ...

Little Spiral Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsThe extra jump rings used when hanging the cluster of charms on this necklace help keep the spiral charm facing forward.For instructions on making beaded head ...

Superstar Earrings Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsThe WildFire™ cord has enough body to pass through the beads without a needle, but if you prefer, you can use a 4" Igolochkoy beadwork needle (#65-054) or othe ...

Chakra Khan Ear Threaders Tutorial(Post)

Created by: Veronica Greenwood Designer TipsCut a piece of wire and make a wrapped loop on one end. Attach your loop to your ear thread. Add one purple (amethyst) bead to the wire and finish your loo ...

Jet Scarab Copper Ring Tutorial(Post)

Depending on the beads you use, this quick and easy unisex design can go from frilly and feminine to macho and masculine.  Created by: Michelle Horning   Designer TipsFor step-by-step instr ...

Fly Bee! Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsPunch 1/16" holes in the bracelet where you want to place the rivets.Run the first rivet through the leather, place a washer on it, and use a fine-point Shar ...

Witchy Earrings Tutorial(Post)

Created by: Jaci BostonDesigner TipsKeep the saw blade well lubricated to create ease while sawing.To avoid breaking your blades, keep the saw upright, without tilting, while you're sawing.For perfec ...

Aqua Love Necklace Tutorial(Post)

Created by: Cindy MorrisDesigner TipsString necklace and finish ends following directions in Beading Cable How-To Sheet below. Use Wire Guardians for a professional finish at the ends of yo ...

Shadow Angel Earring Tutorial(Post)

Note: this design originally used the (discontinued) Lilac Shadow color of dome bead. Suggested subs: Jet Black Large Dome, or Crystal AB Small Dome. Both are 11mm in diameter.Created by: Rita Hutchi ...

Campfire Skies - Riveted Barrette Tutorial(Post)

TierraCast's shimmering antique bronze leather, a hammer-textured spiral link, and shiny black rivets, combine to create a barrette that's perfect for Spring bonfires and Fall festivals. This securel ...

Astral Love Resin Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsSee instruction page for making no-solder bezels.Cut paper to match bezel wire shape.Seal paper and adhere to inside of bezel.Mix a small batch of resin and po ...

Spiral Skull Earrings Tutorial(Post)

Use memory wire to create your own ear wires!Created by: Rita HutchinsonDesigner TipsUse heavy-duty flush cutters to cut 2 equal lengths of memory wire.Form a loop at one end using sturdy round-nose ...

Vintner Earrings Tutorial(Post)

Vintaj findings are designed to be alterable ... here's a fine example!Created by: Rita HutchinsonDesigner TipsSlightly flatten the dome of the Vintaj bead cap. Bend 3 of the "legs" around the sides ...

5 Minute Rings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsCut a 20-gauge or 24-gauge 0.25" (wide) strip of copper, brass or sterling sheet approximately 2.75" long.Smooth and straighten with a nylon hammer.Optional: ...

Tri-Tone Cuff Bracelet Tutorial(Post)

Created by: Rita Hutchinson   Designer TipsUsing a pre-cut and finished bracelet blank, and precut 6" patterned wire makes this bracelet assemble in a snap!Apply pattern to copper blank with des ...

Squidly Necklace Tutorial(Post)

Created by: Jaci BostonDesigner TipsPunch holes in desired locations (click into hole-punch details for usage instructions for this tool).Use ring bending pliers to make the brass blanks wavy.Use 3mm ...

Cowgirl Cuff Bracelet Tutorial(Post)

Created by: Tiffany WhiteDesigner TipsUse the pein side (rounded) of your hammer to texturize the surface of the copper metal strip on the steel block.Using your metal shears, cut a 3/4 inch by 4 inc ...

Cave Man Necklace Tutorial(Post)

Created by: Jaci BostonDesigner TipsCarefully plan the cutting pattern. The shape of these cuts creates decorative prongs or tabs to hold the gemstone slab bead.For this design draw the shape to be c ...

Go Round-and-Round Enameled-Copper Earrings Tutorial(Post)

Created by: Mollie Valente Designer TipsMake two enameled copper washers. You can either use the enamel colors of your choice, or the colors listed in the suggested materials. Follow instruction ...

Never Enough Pendant Necklace Tutorial(Post)

Created by: Cindy MorrisDesigner TipsClean the glass pieces.Cut images, phrases and paper to fit the glass slide. Glue images and words to the paper.Sandwich paper between the glass pieces and carefu ...

Peace Bracelet Tutorial(Post)

Learn how to polish, color and add charms to an inexpensive brass bangle bracelet and turn it into a finished salable piece of jewelry. No stamping necessary!  Created by: Polly Nobbs-LaRue &nbs ...

Eclipse Cuff Links Tutorial(Post)

Created by: Mollie ValenteDesigner TipsClip the loop off both moon charms, file smooth, and sand with a 600 grit polishing cloth.Use a dapping block to gently dome the moon charms.Soft solder each mo ...

99 Luftballons Tutorial(Post)

ok, so maybe it's just 2 Red Balloons, not 99...Created by: Summer Melaas and Polly Nobbs-LaRue   Designer TipsPunch a 1/16" hole in each blank, directly opposite the existing loop or hole.Clean ...

October Ombre Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsTexture and stamp the sterling heart with ribbon design stamp. New to metal stamping? See step-by-step instructions in our free Metal Stamping 101 PDF.Apply st ...

Enameled Hidden Heart Tutorial(Post)

Created by: Mollie ValenteMake your Enamel DiskUse the dapping set to dome the copper blank.(See Rings & Things blog post: How to Dap and Dome Metal Jewelry.)Fire the concave (back side) of the c ...

Avocado Dorado Cuff Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsSolder Brass Ninja Star* to Copper Disk:If the copper or brass shapes are bent, straighten them with a steel block and nylon or rawhide mallet. (Solder doesn ...

Captured Aventurine Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Coil the wire around a 14- ...

Sweet Skull Pendant Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUsing ball-end head pins, make 8 beaded loop dangles in flowery colors. Use one metal rondelle on each side of the crystal bead for fuller dangles. Wrapped loo ...

Pennant Pendant Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUse texture plates from the tool kit to create designs on each torch-fired metal clay pennant. Patina each with liver of sulfur.Center one of the pennants on t ...

Dark Skies Enameled Pendant Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUse dapping block to shape blank.After dapping, punch 1/16" hole using the smaller (silver) side of a EuroTool "helicopter" punch.Clean blank with penny brite ...

Safe Journey Pendant Tutorial(Post)

Created by: Mollie Valente   Designer TipsTo add texture, place the metal blank on the steel block and use the ball end of the hammer to make a lightly hammered surface.After hammering, the meta ...

Transylvanian Visitor Pin Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsLaminate or seal the image with Crafter's Pick™ The Ultimate adhesive.Glue the image onto the blank "back" with the Crafter's Pick.Use side cutters to remove p ...

Craters of the Moon Earrings Tutorial(Post)

Learn simple but effective techniques to hammer-texture and dome metal disks to create beautiful handmade earrings.Created by: Mollie ValenteHammer and Dome the BlanksPlace a Vintaj blank on the stee ...

Fused Spirals Earrings Tutorial(Post)

Created by: Rita Hutchinson Designer TipsLightly dome (dap) the blank in dapping block.How to Dap (Dome)Clean blank with penny brite and dry.Apply counter enamel to back of blank. Fire and allow ...

Emma Dog Tag Tutorial(Post)

Emma is in our warehouse daily, and I wanted to honor her with some Jewelry.Created by: Rita HutchinsonDesigner TipsNew to stamping? See Metal Stamping 101.The 3mm Bridgette stamp set allowed a long ...

Fresh Pots Bracelet Tutorial(Post)

Created by: Jaci BostonDesigner TipsUse silhouettes of multiple teapots and teacups to make this design. No two are alike.Use rubber cement to glue the paper images to the metal.Saw vertically at all ...

Sacred Curling Stone Bracelet Tutorial(Post)

Created by: Amy MickelsonDesigner TipsUse 6 wavy disks with the dapping set, to create domed bead caps to fit the rotund trade beads. Flatten the rest with a nylon hammer to create 12mm brass heishi.

Spiral Lagoon Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsPlace the TierraCast® link on the bracelet in desired location, and use a fine-point Sharpie® (or other extra black permanent marker) to mark where to punch ...

Wonder Woman Riveted Cuff Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsThis bracelet is super fast and fun to make, once you have the necessary tools.The Domed Piercing Base allows you to pierce the domed bracelet without leavin ...

Mehandi Coil Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUse shears to cut flat wire. Texture as desired with texturing hammer or metal stamps.Create coil by wrapping at an angle around large barrel of bail making pl ...

Sari Fishtail Bracelet Tutorial(Post)

Created by: Rita Hutchinson   Designer TipsUsing files and sanding sponges, refine the ends of the cuff bracelet until it is smooth and comfortable to wear. Adjust shape by hand as desired, to f ...

Little Sprout Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFor step-by-step illustrated instructions showing how to engrave the pendant, see Rings & Things blog post "Jewelry Making DIY – Make a Micro Engraved Penda ...

Ladylike Lariat Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsFreshwater pearls often have small holes. If the hole is too small, use a thinner headpin, or ream the opening with a battery operated bead reamer (#69-058).Fo ...

Hexed Wire Bracelet - Tutorial(Post)

Learn a simple and sparkling way to make bangle bracelets with hex wire. No soldering or wire wrapping required!Created by: Rita HutchinsonDesigner TipsUnroll and straighten enough wire for all brace ...

Silken Bouquet Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsDetermine desired length of finished bracelet.Subtract 1 1/4" from total desired length for connector piece.Keeping toggle clasp parts attached, remove center ...

Shoreline Bangle Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsMake wire-wrapped loops with the pearls, and add a jump ring to each charm. For instructions on wire-wrapped loops, and best way to open and close jump rings, ...

Area 51 Pin Tutorial(Post)

I made this pin when the UFO and alien stamp first came out, but they are no longer in production. But there are so many other fun options for customizing this blank with features for other states! A ...

Red Light / Green Light Enamel Earrings(Post)

Your Choice: They're balloons, streetlights or lollipops!  Created by: Summer Melaas and Polly Nobbs-LaRue   Designer TipsPunch a 1/16" hole in each blank, directly opposite the existing lo ...

The North Star Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCreate a bail using a 5/16" x 3" piece of 24-gauge copper sheet: Cut, file, stamp, punch and ream the holes a bit larger. Use bail-making pliers to bend the sta ...

Pumpkin on the Vine Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsMake 2 matching spiral head pins. Follow the steps from the Rings & Things blog post "How to Make Spiral Head Pins.Add the following beads to a spiral head ...

Samba Scarlet Smile Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsLinks Updated!Use a nylon hammer to gently flatten the rock & roll oval link before stamping the plain side.Stamp a practice pattern on paper to ma ...

On the Bias Corrugated Metal Earring Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCorrugate the metal blanks by feeding them through the Tube-Wringer® on the diagonal. Squeeze the hand grip to maintain even pressure while turning the turn key ...

Grey Days Earrings(Post)

Created by: Rita HutchinsonDesigner TipsPlace Cushion Stone in Setting, pressing the bezel into place to hold the stone firm. Bend the prongs down from alternate sides to keep the stone centered. Use ...

Busy Bee Earring Tutorial(Post)

Created by: Tiffany WhiteDesigner TipsTape the stamping blanks to the steel block. Use a permanent marker to draw lines where you want to stamp the phrase "BUSY BEE".When stamping, make sure that eac ...

Cute as a Button Necklace Tutorial(Post)

Created by: Mollie Valente Designer TipsCenter the button on the pendant finding and mark the hole locations with a Sharpie® pen. Punch holes in the pendant finding.Tie the button onto the pendant fi ...

Polynesian Sunset Earrings Tutorial(Post)

Created by: Rita Hutchinson   Designer TipsFor step by step instructions on making loops, see: Jewelry Basics 101 (PDF).String beads in random pattern in varying 3 to 5" lengths on beading ...

Gear Head Bobby Pin Tutorial(Post)

 Created by: Polly Nobbs-LaRue Designer Tips Always wear safety glasses when cutting, drilling or punching.The bobby pin is a little heavier gauge than recommended for the punch, so us ...

In the Moment Leather Cuff Bracelet Tutorial(Post)

Created by: Mollie Valente   Designer TipsCustomize the word blank:Place the word blank on the steel block and create a dappled texture with the ball peen side of the chasing hammer.Use the brac ...

Night Reflections Enamel Earrings Tutorial(Post)

Created by: Summer MelaasDesigner TipsUse the smaller end of the 2-hole metal punch to punch a 1/16" hole near the top of the blanks. Be sure to center it, so the earrings hang properly.Clean the bla ...

Aztec Princess Earring Tutorial(Post)

This project uses Swarovski crystals. Created by: Tiffany WhiteDesigner TipsMark all six of your triangle blanks with a permanent marker dot in one of the points and straight down on the opposite sid ...

Floral Intuition Earrings Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsCreate wire wrapped link with Cacoxenite and Filigree Beads to attach Blossom charm to the shank of the button. New to jewelry-making? See Jewelry Basics 101 ( ...

Great Odin's Raven Viking Knit Bracelet Tutorial(Post)

Created by: Jaci BostonDesigner TipsFollow the instructions that come with the Lazee Daizee™ to create two Viking knit sections for the bracelet.The Lazee Daizee™ accommodates various sizes of wire.

Candara Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRue   Designer Tips  Unspool approximately 26" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Use ring-be ...

Double Wrap Hammered Rings Tutorial(Post)

Depending on the beads you use, this quick and easy unisex design can go from frilly and feminine to macho and masculine.Created by: Michelle HorningDesigner TipsFor step-by-step instructions, see th ...