430 results for '69-090'

News & Information (429)

Metallo Elemento Bracelet Tutorial(Post)

 Created by: Polly Nobbs-LaRue Designer Tips For a small wrist (shown), cut 2 pieces of leather each 5" long. For a standard men's bracelet, cut 2 pieces each 6" long. or measure the w ...

Belle of Ireland Necklace Tutorial(Post)

Created by: Liz GrafDesigner TipsMeasure and cut cotton cord to 20".Cut 2 sections off the chain (10 links each section).Pick out six 4mm jump rings and one 6mm jump ring.Place 8 heishi beads on the ...

Bermuda Crescent Earrings Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsCut 4 lengths of chain, each 4 links long.Use 4.5mm jump rings to attach chain to the top holes of the crescent link. For best way to open and close loops, see ...

U Look Good in Pink Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsThe ""back"" of the U shaped connector is lashed to in this design, because it has a channel that helps to hold the beads in place.Check the spacing of the bea ...

Dark Skies Enameled Pendant Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUse dapping block to shape blank.After dapping, punch 1/16" hole using the smaller (silver) side of a EuroTool "helicopter" punch.Clean blank with penny brite ...

Sunshine Squared Necklace Tutorial(Post)

Created by: Bridget AustinDesigner TipsNo jump rings are needed; all you need are the links from the chain, to combine the sew-on stones and clasp.See the Jewelry Basics 101 (PDF) for instructions on ...

Baroque Beauty Necklace Tutorial(Post)

Designer TipsUsing one eye pin, slide on one 6mm 5328 bicone bead and make a simple loop. Repeat 30 more times and set aside. New to making jewelry? See Jewelry Basics 101 (PDF).Using an eye pin ...

Tassel and Sparkle - Simple Charm Bracelet Tutorial(Post)

Chain bracelets adorned with a simple charm continue to be popular. You can customize this design by using a different colored Swarovski rivoli stone, different styles of chain, or tassels made of di ...

Peaceful Thoughts Lotus Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner Tips - Part 1: Prepare ComponentsDisassemble the metal mesh choker necklace and temporarily set aside the lobster clasp and metal mesh chain. For best way to open a ...

In the Moment Leather Cuff Bracelet Tutorial(Post)

Created by: Mollie Valente   Designer TipsCustomize the word blank:Place the word blank on the steel block and create a dappled texture with the ball peen side of the chasing hammer.Use the brac ...

Promise Pin Tutorial(Post)

Created by: Mollie Valente Designer TipsUse 26-gauge wire to lash the beads to the pin back.Cut the chain into two pieces: 5-1/2" and 6-1/2" in length.Use 6mm jump rings to attach the chain to the pi ...

Fused Spirals Earrings Tutorial(Post)

Created by: Rita Hutchinson Designer TipsLightly dome (dap) the blank in dapping block.How to Dap (Dome)Clean blank with penny brite and dry.Apply counter enamel to back of blank. Fire and allow ...

Adjustable Necklace Extenders Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFor instructions with step-by-step photos, please see our blog article: How to Make an Adjustable Necklace Extender.Suggested Supplies1 foot (use 4") #40-011-00 ...

Graveyard Sweater Guard Tutorial(Post)

Created by: Liz Graf   Designer TipsMeasure the 3.9mm chain, and cut one 4" piece, and one 5" piece.Measure the 4.5mm chain, and cut a 6" piece.Attach the chains to the sweater guards with large ...

Patriotic Drops Earrings Tutorial(Post)

Created by: Amy ScaliseDesigner TipsUse the 1-Step Looper to create 36 (12 of each color) crystal pearl dangles.Cut two 1" pieces of chain and attach approximately 2 dangles per link directly onto th ...

Beachy Panel Bracelet & Earrings Set(Post)

Created by: Guest Designer Deb FlorosSuggested Supplies 1 #40-090-34-3 Silver Plated Disk & Loop Chain, 7mm by the FOOT1 #05-817-LTU8 PRESTIGE 5817 8mm Crystal Pearl Cabochon Crystal Iridescent ...

October Ombre Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsTexture and stamp the sterling heart with ribbon design stamp. New to metal stamping? See step-by-step instructions in our free Metal Stamping 101 PDF.Apply st ...

Ultraviolet Crystal Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUse chain nose pliers to gently close the tabs over the crystal stones. See Learn to make easy rivoli crystal rings blog for tips on setting crystals in bezels ...

Interchangeable Bracelet Tutorial(Post)

All chain and settings used below are in Antique Brass, but Silver Plate and Antique Copper settings are also available!Created by: Bridget AustinDesigner TipsUse chain nose pliers or a burnishing to ...

Astral Love Resin Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsSee instruction page for making no-solder bezels.Cut paper to match bezel wire shape.Seal paper and adhere to inside of bezel.Mix a small batch of resin and po ...

4th of July Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsCenter a stone in a setting and gently squeeze prongs in (with your fingers or pliers) working from opposite sides to keep the stone centered. Once the prong ...

April Love - Bracelet Tutorial(Post)

Created by: Sondra Barrington How can I customize thee? Let me count the ways...  Designer Tips  Chain bracelets adorned with a simple heart charm continue to be popular. The sterling silve ...

Custom Mothers Day Stamped Necklaces(Post)

Here's a Mother's Day / Grandmother's birthstone jewelry idea that allows each child to stand apart from the others.Created by: Tiffany WhiteDesigner TipsNot sure which birthstones go with the months ...

Kraken Belt Buckle Tutorial(Post)

Created by: Elisabeth ValenteDesigner TipsConsider taking a jewelry-making class through a local college or art school. The Complete Metalsmith by Tim McCreight and Simple Soldering: A Beginner's Gui ...

Delightfully Dotty Enameled Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsCut copper sheet to size or use a premade copper blank. If you have cut your own blank, punch hole in appropriate location and file edges to remove roughness.C ...

A Dog's Night Out Collar Tutorial(Post)

Created by: Valorie Nygaard-PouzarDesigner TipsWhether it be the park or the opera, your pooch will prance in style with this custom and personalized doggie necklace.Determine the total length of the ...

Leather Petal Earrings Tutorial(Post)

You may have seen some fun leather earrings cut out in the shape of a petal. Why not take it a step further and add some extra pizazz! Just adding some chain and a couple of crystals gives them a lit ...

Sagittarius Leather Bracelet(Post)

Created by: Sondra Barrington Designer TipsCut leather flush after measuring desired length. Use a dab of glue inside one cord end. Insert leather into the cord end and gently pinch the cord end ...

Devoted Wire-Wrapped Crystal Pendant Tutorial(Post)

This project uses Swarovski crystals. Created by: Amy MickelsonDesigner TipsCut a length of wire 20" long, or longer if desired. It is better to have plenty of wire for wire-wrapping the heart pendan ...

Sour Patch Bracelet Tutorial(Post)

Created by: Rita Hutchinson 12mm #4470 Cushion Squares by Swarovski are nearly gone, but these settings also work with most other brands of 12mm cushion squares. Shop remaining colors while they ...

Geometric Chevron Earrings Tutorial(Post)

These geometric, simplistic, edgy metallic long chain earrings feature double spike Swarovski crystals! The attention-grabbing, lightweight earrings look like a million bucks but, they are actually v ...

All Black and White Earrings Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsCut chain to a length of 8 links. Attach one end to earwire for ease in handling.Create dangles with crystal beads and round metal beads, and wire wrap directl ...

My Blue Heaven Choker Necklace Tutorial(Post)

This short 16.5" necklace can also be double-wrapped and worn as a chunky bracelet.Created by: Mollie Valente Designer TipsUse a steel burnisher to carefully smooth (burnish) the prongs down ont ...

Silver and Bright Necklace(Post)

Created by: Guest Designer Deb FlorosSuggested Supplies1 #56-216-36-3 Instant Pendant with Screw-On Cone - Silver Color (pack)1 #26-114-3 Silver Plated Metal Beads, 5x5mm Barrel, Large Hole (100 Piec ...

Fade To Black Skull Necklace Tutorial(Post)

Created by: Summer Melaas and Sondra BarringtonDesigner TipsFile the drop loops, to give the gluing surface more "tooth". See "Gluing to Metal" Technique Sheet below for additional gluing tips.Mix 2- ...

Titanium Octagon Key Ring Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsThese flat-wire octagonal titanium key rings have a nice look and feel, and the octagon Swarovski Strass crystal continues the geometry. (If you it's crazy t ...

Heart Tag and Tassel Chain - Silver Bracelet Tutorial(Post)

Chain bracelets adorned with a simple heart charm continue to be popular. The sterling silver heart blank was intentionally left blank, but could easily be stamped or engraved. You can further custom ...

Tiny Living Terrarium Necklace Tutorial(Post)

Created by: Summer Melaas   Designer TipsAdd about 1/2" of soil, a small amount of moss, then sedum or other tiny succulents to a glass bottle charm. Total dirt/moss should be about 3/4". M ...

Spiders and Skulls Jewelry Set Tutorial(Post)

Created by: Liz GrafDesigner Tips - For Necklace:String crystals, skull beads, and beads on beading cable. Finish each end with a crimp tube and wire protector.Attach spider charms with jump rings to ...

Witchy Earrings Tutorial(Post)

Created by: Jaci BostonDesigner TipsKeep the saw blade well lubricated to create ease while sawing.To avoid breaking your blades, keep the saw upright, without tilting, while you're sawing.For perfec ...

Go Round-and-Round Enameled-Copper Earrings Tutorial(Post)

Created by: Mollie Valente Designer TipsMake two enameled copper washers. You can either use the enamel colors of your choice, or the colors listed in the suggested materials. Follow instruction ...

Eclipse Cuff Links Tutorial(Post)

Created by: Mollie ValenteDesigner TipsClip the loop off both moon charms, file smooth, and sand with a 600 grit polishing cloth.Use a dapping block to gently dome the moon charms.Soft solder each mo ...

Enameled Hidden Heart Tutorial(Post)

Created by: Mollie ValenteMake your Enamel DiskUse the dapping set to dome the copper blank.(See Rings & Things blog post: How to Dap and Dome Metal Jewelry.)Fire the concave (back side) of the c ...

Spiral Lagoon Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsPlace the TierraCast® link on the bracelet in desired location, and use a fine-point Sharpie® (or other extra black permanent marker) to mark where to punch ...

Mehandi Coil Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUse shears to cut flat wire. Texture as desired with texturing hammer or metal stamps.Create coil by wrapping at an angle around large barrel of bail making pl ...

Busy Bee Earring Tutorial(Post)

Created by: Tiffany WhiteDesigner TipsTape the stamping blanks to the steel block. Use a permanent marker to draw lines where you want to stamp the phrase "BUSY BEE".When stamping, make sure that eac ...

Night Reflections Enamel Earrings Tutorial(Post)

Created by: Summer MelaasDesigner TipsUse the smaller end of the 2-hole metal punch to punch a 1/16" hole near the top of the blanks. Be sure to center it, so the earrings hang properly.Clean the bla ...

Candara Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRue   Designer Tips  Unspool approximately 26" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Use ring-be ...

Double Wrap Hammered Rings Tutorial(Post)

Depending on the beads you use, this quick and easy unisex design can go from frilly and feminine to macho and masculine.Created by: Michelle HorningDesigner TipsFor step-by-step instructions, see th ...

Infinite Path Bracelet Tutorial(Post)

Created by: Kameron FoxDesigner TipsThese earrings and matching bracelet were created using the step by step instructions on page 92 of Beautiful Wire Jewelry for Beaders: Creative Wirework Projects ...

Let it Snow Stamped Necklace Tutorial(Post)

Created by: Cindy MorrisDesigner TipsCut 24-gauge sterling sheet into a 1" to 1.5" square. (Cindy's is about 1.25" or 32mm)Use a file to smooth the edges and round the corners.Create the stamped meta ...

Brass Arrow Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCut the wire in half and form an "eye" loop on one end of each wire.Flatten the loop by striking with a chasing hammer on a steel block.Add the following beads ...

Ava's Ladies in Waiting Bridesmaid Necklaces Tutorial(Post)

Created by: Valorie Nygaard-Pouzar   Designer TipsCarefully stamp the metal blank.Antique the charm so the impressions are more pronounced.Gently sand and polish.Attach to jump ring & chain.

Slam Dunk Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner Tips Stamp player number onto the tag. (For detailed stamping instructions, see link below.)Add additional tags for multiple players, or use larger tags for team n ...

It's Good to Be King Tie Bar Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCut the copper strip to about 2" in length. Use a texture hammer or pattern stamp to apply a random pattern. File the corners and sides until smooth.Soft solder ...

Merry Tag Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsClean the door blanks in a tumbler for 2-3 hours, or with fine-grit sandpaper and a polishing cloth.Find a pleasing portion of the Christmas tin, that fits ...

Memory Journal Necklace Tutorial(Post)

Created by: Sondra BarringtonDesigner TipsSee the Create a Hinged Metal Memory Journal blog post for a step-by-step tutorial with images.Texturize or etch* various metal pieces for the journal and pa ...

Winged Heart Brooch Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUse two-part epoxy to glue two magnets to the back of the BRONZclay™ piece.Two earring magnets and backings make for a secure hold on clothing.When not being w ...

DIY Adjustable Bangle Bracelet Tutorial(Post)

This style of bracelet is a great one-size-fits-all design. OK, so technically the same bracelet size won't fit both a petite 6-year-old and a Samoan warrior, but odds are that you can determine one ...

Enameled Orchid Eye Tutorial(Post)

Created by: Mollie Valente Make your Enamel DiskUse the dapping set to dome the copper blank. (See Rings & Things blog post: How to Dap and Dome Metal Jewelry.)Fire the concave (back side) o ...

Hidden Ecosystem Cuff Bracelet Tutorial(Post)

Created by: Cindy Morris Designer Tips Stamp, hammer and punch holes in the copper until you are satisfied.File any sharp edges.Wrap the strip around a small bottle (aspirin size works well ...

Enlightened Earring Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUsing a longer head pin allows for double "messy" wrapping at the top of each crystal.Attach 4 crystal dangles to each of 6 jump rings. 2 extra jump rings face ...

Arrow - Etched Copper Bracelet Tutorial(Post)

Created by: Summer MelaasDesigner TipsOptional: Punch a hole in the corner of the blank, following instructions in hole-punch below. After completing bracelet, dangle a charm or beaded dangle of your ...

Page 394 Bookmark Tutorial(Post)

"Turn to Page 394" is a quote known to most Harry Potter fans. What will you put on your custom bookmarks?Created by: Rita HutchinsonDesigner TipsThe stamp guides are tremendously helpful for keeping ...

Jet Scarab Copper Ring Tutorial(Post)

Depending on the beads you use, this quick and easy unisex design can go from frilly and feminine to macho and masculine.  Created by: Michelle Horning   Designer TipsFor step-by-step instr ...

Fly Bee! Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsPunch 1/16" holes in the bracelet where you want to place the rivets.Run the first rivet through the leather, place a washer on it, and use a fine-point Shar ...

Skull Kid Leather Wrapped Bracelet Tutorial(Post)

Created by: Jaci BostonDesigner TipsCreate a template from a copyright-free image.Glue your image pattern to the metal with rubber cement, and cut along the pattern with a jeweler's saw.Keep the saw ...

All Seeing COPPRclay® Bracelet Tutorial(Post)

Created by: Joe HentgesDesigner TipsCreate the COPPRclay centerpiece according to the manufacturer's instructions. Like most other metal clays, COPPRclay must be fired in a kiln. COPPRclay shrinks ap ...

Cowgirl Cuff Bracelet Tutorial(Post)

Created by: Tiffany WhiteDesigner TipsUse the pein side (rounded) of your hammer to texturize the surface of the copper metal strip on the steel block.Using your metal shears, cut a 3/4 inch by 4 inc ...

Cave Man Necklace Tutorial(Post)

Created by: Jaci BostonDesigner TipsCarefully plan the cutting pattern. The shape of these cuts creates decorative prongs or tabs to hold the gemstone slab bead.For this design draw the shape to be c ...

The View Necklace Tutorial(Post)

Created by: Cindy MorrisDesigner TipsStamp front piece first (I used the "l" to make diagonal lines on the window frame). Flatten. Patina with Win-Ox™ and clean with steel wool.Clean back piece with ...

Pretty in Pink Bracelet Tutorial(Post)

Created by: The Swarovski Design Team Designer TipsFor best way to open and close loops, see Jump Ring Hint in Jewelry Basics 101 (PDF). Suggested Supplies1 6-pack #02-088-34-182  ...

Fold-Formed Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsJewelry Lab: 52 Experiments, Investigations and Explorations in Metal has a great tutorial on fold forming. Plus of course, Charles Lewton-Brain's book Foldf ...

Captured Aventurine Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Coil the wire around a 14- ...

Drops of Light - Pearl Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFor step-by-step pictorial instructions on making this pair of earrings, see Mollie's blog article: ...

Pennant Pendant Necklace Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUse texture plates from the tool kit to create designs on each torch-fired metal clay pennant. Patina each with liver of sulfur.Center one of the pennants on t ...

Fresh Pots Bracelet Tutorial(Post)

Created by: Jaci BostonDesigner TipsUse silhouettes of multiple teapots and teacups to make this design. No two are alike.Use rubber cement to glue the paper images to the metal.Saw vertically at all ...

Sweet and Sour Engraved Bracelet Tutorial(Post)

Edged cuff bracelets also work great for leather, fabric, beaded designs and more!Created by: Rita HutchinsonDesigner TipsStamp or sketch design on aluminum sheet if desired.Follow marked (or freehan ...

Beachcomber Wine Glass Charm Set Tutorial(Post)

Created by: Veronica GreenwoodDesigner TipsCreate a colorful beaded drop for each wine glass marker, using gemstones or other beads of your choice. New to jewelry-making? See Basic Jewelry-Making Tec ...

Layered Floral Earrings with Stamping Tutorial(Post)

Created by: Guest Designer Deb FlorosSuggested Supplies2  #44-722-28-0 Brass Stamping Blank, Long Oval Drop, 41mm1 #69-245-103 ImpressArt Metal Stamp, Floral Swirl1 6-piece pack #44-180-027-6 An ...

Poppy Field Pendant Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsSelect and clean two matching glass pieces.Select an image and cut it to match the glass shape and size.Carefully wrap the glass with copper-foil tape. To creat ...

Red Light / Green Light Enamel Earrings(Post)

Your Choice: They're balloons, streetlights or lollipops!  Created by: Summer Melaas and Polly Nobbs-LaRue   Designer TipsPunch a 1/16" hole in each blank, directly opposite the existing lo ...

The North Star Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCreate a bail using a 5/16" x 3" piece of 24-gauge copper sheet: Cut, file, stamp, punch and ream the holes a bit larger. Use bail-making pliers to bend the sta ...

Area 51 Pin Tutorial(Post)

I made this pin when the UFO and alien stamp first came out, but they are no longer in production. But there are so many other fun options for customizing this blank with features for other states! A ...

On the Bias Corrugated Metal Earring Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCorrugate the metal blanks by feeding them through the Tube-Wringer® on the diagonal. Squeeze the hand grip to maintain even pressure while turning the turn key ...

The Imp Bracelet Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsPlan out design, and stamp words and symbols. ("I Drink and I Know Things" is a quote from Game of Thrones, and the colors used here are the colors of house La ...

Water Droplet Earrings Tutorial(Post)

Created by: Liz GrafDesigner TipsCut 8 links of your selected chain.I deconstructed and used part of a gunmetal chain tassel, or you can use 8 links from some scrap antiqued brass cable chain.Hook Br ...

Hearts and Rain Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsAdd bicone crystals to the head pins, and make wrapped loops directly onto the loops of the filigree.For the top beaded pin, cut the ball off a ball-end head ...

Foliage Necklace Tutorial(Post)

  Created by: Rita Hutchinson   Designer Tips  Make 45 wire-wrapped loop dangles, each with a single crystal bicone. See Basic Jewelry-Making Technique Sheet (PDF)Use a jump ring ...

Crystal Tree Earrings Tutorial(Post)

Designer TipsAdd a smoky quartz cube bead to the head pin, then add the largest fern green margarita bead, then 1 each of the rest of the margarita beads in decreasing size order, and top with the me ...

Pawrific Enamel Necklace Tutorial(Post)

Created by: Summer MelaasDesigner TipsPunch a hole in the top corners of your copper blank. File any sharp bits.Clean your blank very well with warm water and Penny Brite.Cut your 22 ga bare copper w ...

Infinite Path Earrings Tutorial(Post)

Created by: Kameron FoxDesigner TipsThese earrings and matching bracelet were created using the step by step instructions on page 92 ofBeautiful Wire Jewelry for Beaders: Creative Wirework Projects f ...

5 Minute Rings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsCut a 20-gauge or 24-gauge 0.25" (wide) strip of copper, brass or sterling sheet approximately 2.75" long.Smooth and straighten with a nylon hammer.Optional: ...

Tri-Tone Cuff Bracelet Tutorial(Post)

Created by: Rita Hutchinson   Designer TipsUsing a pre-cut and finished bracelet blank, and precut 6" patterned wire makes this bracelet assemble in a snap!Apply pattern to copper blank with des ...

Upcycled Cog Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsWhenever walking, watch for unusual/interesting metal objects on the ground! When they are an unknown metal, do not try antiquing them or punching holes with ...

Forest Fairy Angel Earring Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsAdd crystals, angel wing beads and spacers to head pins and finish with a simple loop. (See Making Earrings 101 below for instructions to make loops.)Because t ...

With Grace Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsUse a steel burnisher to carefully set the cushion stone in the bezel setting.For illustrated step-by-step instructions, see How to Set Rivoli Stones in Bezels ...

Basketball Finals - DIY Team Colors Bracelet(Post)

C'est La Vie Finals BraceletWhether you defy history, or regularly make history, we've got your colors -- over 80 colors to choose from, and a nice variety of frame setting options.Created by: Polly ...

Sweet Skull Pendant Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUsing ball-end head pins, make 8 beaded loop dangles in flowery colors. Use one metal rondelle on each side of the crystal bead for fuller dangles. Wrapped loo ...

Venus Necklace Tutorial(Post)

Created by: Mollie Valente Designer TipsUsing a decorative metal stamp on a solid copper tube-top bails is an easy way to sign your work, or simply give a secret little accent to the back of a p ...