null

Beadable and Changeable Bracelets

Shop a large variety of beadable and changeable bracelet blanks and bead-change designs metal bracelet forms from Rings & Things. Wholesale Prices, Fast Shipping.
Click into any product's details for more information about each style, and links to Related Products.
  • The Changeable cuff bracelet with screw-on end, is designed for Euro beads such as Pandora, Troll and Calypso beads.
  • Cuff components with loops are designed to have a focal (such a resin-filled bezel, an artisan bead with wire-wrapped loops, or a stamped nameplate) added between the loops. Keep one loop slightly open, so the bracelet can be clasped and un-clasped.
  • Calypso snake chain bracelets can be worn as-is, or covered with large-hole beads including Euro beads, storyteller beads, and artisan lampwork glass beads.
  • The 7" bracelet spring is basically a tiny, tightly-coiled Slinky. Cover it with beads that have a 1.5mm or larger hole.
  • Wire-lash beads, or wrap contrasting colors of wire, on openwork brass bracelet cuffs.
  • Centerline™ bracelets are designed for 11/0 Delica seed beads but can be used with so much more!
Filters
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help! See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

    Bracelet, Spring, 7" (100 Pieces)

    $12.25
    See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $12.25
    Subtotal:
    Add to Cart
  • Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.To create an antiqued look on raw brass, apply an oxidizing solution. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.To create an antiqued look on raw brass, apply an oxidizing solution. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Bracelet Finding, Cuff, Open, 3/4" (Each)

    The Beadsmith

    $5.09
    Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and...
    Out of stock
    Qty in Cart: 0
    Price:
    $5.09
    Subtotal:
    Out of stock
  • If your custom centerpiece has loops with an inner diameter smaller than 2mm, or you'd like to use a sterling silver bezel cup with this, use sterling jump rings to attach your centerpiece. Green Silver All our sterling silver items are nickel free. And this sterling silver item is even better! This item is made from environmentally responsible green silver. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.Questions? E-mail us for friendly, expert help! If your custom centerpiece has loops with an inner diameter smaller than 2mm, or you'd like to use a sterling silver bezel cup with this, use sterling jump rings to attach your centerpiece. Green Silver All our sterling silver items are nickel free. And this sterling silver item is even better! This item is made from environmentally responsible green silver. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.Questions? E-mail us for friendly, expert help!

    Sterling Silver Bracelet, Cuff, Half Round Wire (Each)

    $11.05
    If your custom centerpiece has loops with an inner diameter smaller than 2mm, or you'd like to use a sterling silver bezel cup with this, use sterling jump rings to attach your centerpiece. Green Silver All our sterling silver items are nickel free...
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $11.05
    Subtotal:
    Add to Cart
  • Centerline™ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times, thermally bonded thread such as 0.006" Fireline or Wildfire is suggested (so you don't pierce your thread). Some beaders prefer the slight stretch of Size D Nymo or S-Lon, or Size E or F silk thread. Many people prefer the flexibility of big-eye needles, as it's easier to wiggle a slightly flexible needle through the beads. Other people prefer the strength of beading needles. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Centerline 3 Row Cuff, 5.5x.38" - Rhodium Plated (Each)

    $5.79
    Centerline™ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times,...
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $5.79
    Subtotal:
    Add to Cart
  • Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.To create an antiqued look on raw brass, apply an oxidizing solution. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.To create an antiqued look on raw brass, apply an oxidizing solution. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Bracelet Finding, Cuff, Open, 1/2" (Each)

    $7.82
    Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and...
    Out of stock
    Qty in Cart: 0
    Price:
    $7.82
    Subtotal:
    Out of stock
  • Centerline™ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times, thermally bonded thread such as 0.006" Fireline or Wildfire is suggested (so you don't pierce your thread). Some beaders prefer the slight stretch of Size D Nymo or S-Lon, or Size E or F silk thread. Many people prefer the flexibility of big-eye needles, as it's easier to wiggle a slightly flexible needle through the beads. Other people prefer the strength of beading needles. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Centerline™ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times, thermally bonded thread such as 0.006" Fireline or Wildfire is suggested (so you don't pierce your thread). Some beaders prefer the slight stretch of Size D Nymo or S-Lon, or Size E or F silk thread. Many people prefer the flexibility of big-eye needles, as it's easier to wiggle a slightly flexible needle through the beads. Other people prefer the strength of beading needles. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Centerline 3 Row Cuff, 5.5x.38" - Gold Plated (Each)

    The Beadsmith
    $7.47
    Centerline™ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times,...
    Out of stock
    Qty in Cart: 0
    Price:
    $7.47
    Subtotal:
    Out of stock
  • A Tip on Using Silver Plated Amate Studios Bezels On plated Amate Studios bezels, the plating is applied after hand-soldering is complete to create a more uniform finish. Baking, firing or otherwise applying heat may cause this plating to melt and/or discolor. For best results with polymer clay, do not bake your designs in silver plated Amate Studios findings. Instead, shape your piece to fit then bake it alone and glue it into the bezel after it has cooled. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Amate Studios Silver Plated Bracelet Component, Cuff, Small (Each)

    Amate Studios
    $3.80
    A Tip on Using Silver Plated Amate Studios Bezels On plated Amate Studios bezels, the plating is applied after hand-soldering is complete to create a more uniform finish. Baking, firing or otherwise applying heat may cause this plating to melt...
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $3.80
    Subtotal:
    Add to Cart
  • Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.To create an antiqued look on raw brass, apply an oxidizing solution. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.To create an antiqued look on raw brass, apply an oxidizing solution. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Bracelet Finding, Cuff, Open, 1" (Each)

    $9.04
    Raw brass is unplated, and is not as shiny as most plated finishes. To remove tarnish, use brass cleaner, a polishing cloth, or fine grit (1000 - 1500) sandpaper.To give a high polish to raw brass items, tumble-polish them with steel shot, water and...
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $9.04
    Subtotal:
    Add to Cart
  • Black Steel Cable Bracelets Tips These work especially well for dangling charms (small oval jump ring #37-123 fits nicely.) Beads can also be strung onto them. To keep large-hole beads securely on the bracelet, we suggest making a "stopper" bead out of wire. Coil wire tightly on the cord to keep your beads firmly in place, or coil loosely if you only need to keep your end bead from sliding off when the bracelet is unclasped. If you're including lots of large beads, be sure to use the larger bracelet, because the diameter of large beads take up extra wrist space. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Black Steel Cable Bracelets Tips These work especially well for dangling charms (small oval jump ring #37-123 fits nicely.) Beads can also be strung onto them. To keep large-hole beads securely on the bracelet, we suggest making a "stopper" bead out of wire. Coil wire tightly on the cord to keep your beads firmly in place, or coil loosely if you only need to keep your end bead from sliding off when the bracelet is unclasped. If you're including lots of large beads, be sure to use the larger bracelet, because the diameter of large beads take up extra wrist space. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Bracelet, Steel Cable, 1mm, 7" (10 Pieces)

    $12.75
    Black Steel Cable Bracelets Tips These work especially well for dangling charms (small oval jump ring #37-123 fits nicely.) Beads can also be strung onto them. To keep large-hole beads securely on the bracelet, we suggest making a "stopper" bead...
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $12.75
    Subtotal:
    Add to Cart
  • All of our sterling silver is nickel-free, cadmium free and meets the EU Nickel Directive. See Related Products links (below) for similar items, additional jewelry-making supplies that are often used with this item, and general information about these jewelry making supplies.Questions? E-mail us for friendly, expert help!

    Silver Plated Bracelet, Cuff, Changeable (Each)

    $6.80
    All of our sterling silver is nickel-free, cadmium free and meets the EU Nickel Directive. See Related Products links (below) for similar items, additional jewelry-making supplies that are often used with this item, and general information about these...
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $6.80
    Subtotal:
    Add to Cart
  • Centerline™ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times, thermally bonded thread such as 0.006" Fireline or Wildfire is suggested (so you don't pierce your thread). Some beaders prefer the slight stretch of Size D Nymo or S-Lon, or Size E or F silk thread. Many people prefer the flexibility of big-eye needles, as it's easier to wiggle a slightly flexible needle through the beads. Other people prefer the strength of beading needles. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Centerline 9 Row Cuff, 6.75x.75" - Rhodium Plated (Each)

    $10.27
    Centerline™ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times,...
    Out of stock
    Qty in Cart: 0
    Price:
    $10.27
    Subtotal:
    Out of stock
  • Centerline™ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times, thermally bonded thread such as 0.006" Fireline or Wildfire is suggested (so you don't pierce your thread). Some beaders prefer the slight stretch of Size D Nymo or S-Lon, or Size E or F silk thread. Many people prefer the flexibility of big-eye needles, as it's easier to wiggle a slightly flexible needle through the beads. Other people prefer the strength of beading needles. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Centerline™ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times, thermally bonded thread such as 0.006" Fireline or Wildfire is suggested (so you don't pierce your thread). Some beaders prefer the slight stretch of Size D Nymo or S-Lon, or Size E or F silk thread. Many people prefer the flexibility of big-eye needles, as it's easier to wiggle a slightly flexible needle through the beads. Other people prefer the strength of beading needles. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Centerline Cuff w Beadable Plate, 7.63x.38" - Gold Plated (Each)

    $12.17
    Centerline™ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times,...
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $12.17
    Subtotal:
    Add to Cart
  • Centerline™ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times, thermally bonded thread such as 0.006" Fireline or Wildfire is suggested (so you don't pierce your thread). Some beaders prefer the slight stretch of Size D Nymo or S-Lon, or Size E or F silk thread. Many people prefer the flexibility of big-eye needles, as it's easier to wiggle a slightly flexible needle through the beads. Other people prefer the strength of beading needles. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Centerline™ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times, thermally bonded thread such as 0.006" Fireline or Wildfire is suggested (so you don't pierce your thread). Some beaders prefer the slight stretch of Size D Nymo or S-Lon, or Size E or F silk thread. Many people prefer the flexibility of big-eye needles, as it's easier to wiggle a slightly flexible needle through the beads. Other people prefer the strength of beading needles. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Centerline 3 Row Cuff, 8x.38" - Gold Plated (Each)

    $5.57
    Centerline™ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times,...
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $5.57
    Subtotal:
    Add to Cart
  • Centerline™ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times, thermally bonded thread such as 0.006" Fireline or Wildfire is suggested (so you don't pierce your thread). Some beaders prefer the slight stretch of Size D Nymo or S-Lon, or Size E or F silk thread. Many people prefer the flexibility of big-eye needles, as it's easier to wiggle a slightly flexible needle through the beads. Other people prefer the strength of beading needles. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Centerline™ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times, thermally bonded thread such as 0.006" Fireline or Wildfire is suggested (so you don't pierce your thread). Some beaders prefer the slight stretch of Size D Nymo or S-Lon, or Size E or F silk thread. Many people prefer the flexibility of big-eye needles, as it's easier to wiggle a slightly flexible needle through the beads. Other people prefer the strength of beading needles. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Centerline 3 Row Cuff, 8x.38" - Rhodium Plated (Each)

    $4.18
    Centerline™ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times,...
    Out of stock
    Qty in Cart: 0
    Price:
    $4.18
    Subtotal:
    Out of stock
  • Centerline™ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times, thermally bonded thread such as 0.006" Fireline or Wildfire is suggested (so you don't pierce your thread). Some beaders prefer the slight stretch of Size D Nymo or S-Lon, or Size E or F silk thread. Many people prefer the flexibility of big-eye needles, as it's easier to wiggle a slightly flexible needle through the beads. Other people prefer the strength of beading needles. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Centerline™ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times, thermally bonded thread such as 0.006" Fireline or Wildfire is suggested (so you don't pierce your thread). Some beaders prefer the slight stretch of Size D Nymo or S-Lon, or Size E or F silk thread. Many people prefer the flexibility of big-eye needles, as it's easier to wiggle a slightly flexible needle through the beads. Other people prefer the strength of beading needles. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Centerline 9 Row Cuff, 6.75x.75" - Gold Plated (Each)

    $12.89
    Centerline™ Components by the BeadSmith are metal jewelry findings designed for use with size 11 Miyuki Delicas, but they can also be used as a foundation for 3D bead embellishment or wirelashing. When passing through Delica beads multiple times,...
    Out of stock
    Qty in Cart: 0
    Price:
    $12.89
    Subtotal:
    Out of stock
  • Bracelet Sizing Chart Measure wrist circumference with a flexible measuring tape or string. The average bracelet size is approx. 7" for women and 8" for men. Open metal cuff bracelets may be bent slightly to adjust size when purchased, but should not be bent repeatedly. If in doubt, size up, especially if the bracelet must slide over the hand or if beads are strung directly on the bracelet form.   6" Wrist 7" Wrist 8" Wrist 9" Wrist Bangle 6.5 - 6.75" 7.5 - 7.75" 8.5 - 8.75" 9.5 - 9.75" Chain 6.75 - 7" 7.75 - 8" 8.75 - 9" 9.75 - 10" Cuff 6 - 6.25" 7 - 7.25" 8 - 8.25" 8 - 9" See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Bracelet Sizing Chart Measure wrist circumference with a flexible measuring tape or string. The average bracelet size is approx. 7" for women and 8" for men. Open metal cuff bracelets may be bent slightly to adjust size when purchased, but should not be bent repeatedly. If in doubt, size up, especially if the bracelet must slide over the hand or if beads are strung directly on the bracelet form.   6" Wrist 7" Wrist 8" Wrist 9" Wrist Bangle 6.5 - 6.75" 7.5 - 7.75" 8.5 - 8.75" 9.5 - 9.75" Chain 6.75 - 7" 7.75 - 8" 8.75 - 9" 9.75 - 10" Cuff 6 - 6.25" 7 - 7.25" 8 - 8.25" 8 - 9" See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Sterling Silver Bracelet, Cuff, Plain Flat Wire (Each)

    $30.48
    Bracelet Sizing Chart Measure wrist circumference with a flexible measuring tape or string. The average bracelet size is approx. 7" for women and 8" for men. Open metal cuff bracelets may be bent slightly to adjust size when purchased, but...
    Out of stock
    Qty in Cart: 0
    Price:
    $30.48
    Subtotal:
    Out of stock
  • Total: items /

Adding your products to cart

View Cart Continue Shopping