Rings & Things Jewelry Blog

Dance the night away with shining faux kabibi disks, sparkling faceted gemstone beads, and sassy, swinging chain.  Designer TipsCut five pieces of chain: three 3.5"", one 4"" and one 4.25"".On one end of a 3.5"" piece of chain, use a jump ring to attach your lobster clasp. For step-by-step wire-wrapping instructions, and most secure way way to open and close jump rings, see Jewelry Basics 101 (PDF).Cut a piece of wire (about 2""). Using round nose pliers, create a loop on one …

Created by: Summer MelaasDesigner TipsFollow wire-wrapped loop instructions in Jewelry Basics 101 (PDF) to create wire-wrapped link sections with the crystal beads. Be sure to add the various components to your beaded links before finalizing each wire wrap! (Alternately, make simple loops, and /or use jump rings to connect the sections.)Use 24-gauge wire to link one Aurum (gold) crystal to bottom right of songbird and to 5" of chain.Use one gold crystal to link the other end of chain to bottom l …

You might think that mixing these textures wouldn't work, but they look great together! As they move, the larger link shines, and the tiny link sparkles. The CZ charm WAS available in Jet + all 12 birthstone colors. Most colors are now limited-availability, but we'll keeping stocking everything the manufacturer still makes.Created by: Veronica GreenwoodDesigner TipsOpen the oval jump ring, add the 4mm CZ charm, next add the gold textured link, and finally add the sterling link.  Before clos …

Created by: Laurel NewnhamDesigner TipsCut wire into two 16" lengths, one for each earring. Trim excess as needed.Hold wire tightly to create loops that are closer together.Experiment with the position of the beads if using other shapes such as bicones, firepolish rounds or tiny cubes. Some shapes are easier to add on the outer rim of the ring, than others.Free Technique Sheets & How-TosBasic Jewelry-Making Technique Sheet (PDF)Blog post: Wire lashing: an easy way to cover your jewelry with …

Created by: Veronica GreenwoodDesigner TipsPlace the crystal in the bezel setting and using the nylon jaw flat pliers gently fold the prongs down over the crystal.Using the 6.5mm jump ring attach the bezel to the large round link. (For best way to open and close loops, see Jump Ring Hint in Jewelry Basics 101).Attach one of the 5mm jump rings to the large round link.Use the second 5mm jump ring to attach the earwire to the first 5mm jump ring.Repeat for the other earring.Suggested Supplies2 each …