Funky Bohemian Spike Set Tutorial

Written by
Tiffany White
Published on
January 1, 2021 1:01:59 AM PST January 1, 2021 1:01:59 AM PSTst, January 1, 2021 1:01:59 AM PST

Created by: Tiffany White



Designer Tips

  • Cut three pieces of 20-gauge copper wire, each 6" long.
  • Make a wrapped loop at one end of each wire.
  • For step-by-step illustrated instructions, see our blog article: DIY Funky Bohemian Turquoise Spike Jewelry Set
  • Choose beads, and add them to each wire.
  • Make a wrapped loop on the other side of each set of beads.
  • Dip the copper parts in Novacan to antique them.
  • Rinse with water and pat dry, then polish off the high points with an ULTRA polishing cloth.
  • For the earrings, add 5 links of chain to each side. (These chain links are unsoldered, so you can open and close them with your chain-nose pliers.)
  • To finish each earring, add one more link of chain, and use it to connect both chain ends to the ear wire.


  • To finish the necklace, add the chain to the pendant. Use approximately 30" of chain to make the pictured necklace. Or if you prefer a shorter necklace, you can add an antique copper clasp at the back.

Suggested Supplies

  • 1 strand (use 12 beads) #21-007-700-19 45mm Magnesite Gemstone Spike Beads - Turquoise Dyed Magnesite
  • 1 pair #34-063-41 Bronze Niobium Earring Hook Findings
  • 1 pack (use 18") #47-405-20 Copper Jewelry Wire, 20ga, Round, 79'
  • 1 spool (use 30") #40-011-002-7-SP Antiqued Copper Plated Oval Cable Chain by the SPOOL, 4.4mm
  • 1 each #86-310 Novacan Black Patina
  • 1 20-pack #63-528 EURO TOOL Polishing Pads, Ultra, 2x2"

Tools

  • Basic Tool Set
Other Supplies
  • Ruler or tape measure