Free Jewelry Projects

Tivoli Centerline Earrings Tutorial

Craft a perfect Scandanavian design to use with BeadSmith's Centerline earring findings and your favorite color palette of size 11/0 Delica beads.

Read More

Tschinkel's Circles Bracelet Tutorial

Leather is more flexible than the metal that these rivets are designed for, so it's important to add a final bead (any color) on the backside of the bracelet, so the tiny finished/set rivet does not pull through the leather.

Read More

Little Spiral Necklace Tutorial

Created by: Rita Hutchinson 1. The extra jump rings used when hanging the cluster of charms on this necklace help keep the spiral charm facing forward. 2. For instructions on making beaded head pin loops, and the best way to open and close jump rings, see Basic Jewelry-Making Technique Sheet (PDF)

Read More

Matte Satin Necklace Tutorial

Start with plenty of 26-gauge wire, and anchor wire to one side of arc connector. Add 4mm beads and extra lashes between each bead. Finish off the end with additional anchor lashing. Tighten anchor lashes with pliers.

Read More

My Blue Heaven Choker Necklace Tutorial

Created by: Mollie Valente 1. Use a steel burnisher to carefully smooth (burnish) the prongs down onto the rivoli stone in the bezel setting. 2. For step-by-step instructions on setting a crystal stone in a bezel, see below.

Read More

Om Mirage Choker Tutorial

Created by: Michelle Horning 1. For step-by-step instructions on creating macramé jewelry, see How to Macramé a Hemp Bracelet. 2. A choker will usually fit as a double wrap bracelet on most people. Double the amount of working and anchor cord in the original (blog) tutorial for this project.

Read More

Hexed Wire Bracelet - Tutorial

Learn a simple and sparkling way to make bangle bracelets with hex wire. No soldering or wire wrapping required! Created by: Rita Hutchinson 1. Unroll and straighten enough wire for all bracelets you plan to make. Add an extra few inches of wire, as the ends won’t be twisted, and the total length will shrink a tiny bit.

Read More

Puppy Love Pin Tutorial

Created by: Mollie Valente 1. The Complete Metalsmith provides a useful chart for selecting saw blades. 2. Use rubber cement to adhere a paper Scottie dog pattern to the brass. Saw the design out. File the metal to shape. 3.Repeat process with patterned brass heart.

Read More

Candara Bracelet Tutorial

Learn a great trick for soldering links with delicate beads on them -- this even works for pearls!! (But you'll need to hand clean the links, because pearls don't like pickle or tumbling.) 1.Unspool approximately 26" of copper wire. Pull it smooth with flat nylon-jaw pliers. 2.Trim the end neatly (flush) with flush cutters. 3.Use ring-bending pliers to make as many equal sized coils as you can easily fit on the pliers.

Read More

Captured Aventurine Bracelet Tutorial

Created by: Polly Nobbs-LaRue 1.Unspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers. 2.Trim the end neatly (flush) with flush cutters. 3.Coil the wire around a 14-20mm round mandrel, looping pliers, or bail-making pliers.

Read More

Aqua Love Necklace Tutorial

Created by: Cindy Morris 1. String necklace and finish ends following directions in Beading Cable How-to Sheet below. Use Wire Guardians for a professional finish at the ends of your beading cable. When using soft solder, you can use either a soldering iron or a gentle touch with a butane micro torch.

Read More

Dirty Money Clip Tutorial

Created by: Rita Hutchinson 1. Clean both parts with alcohol and allow to dry. Apply flux to key points on the back of the scarab, and then apply small dots of solder to these points using soldering iron. 2. Add flux to the flat side of the money clip. Set money clip in pumice, arranging so that the top of the clip is level. Set the scarab on top of the clip in desired location.

Read More

Blue Pin Stripe Lashed Memory Wire Bracelet Tutorial

This project uses durable, springy memory wire as the base, and 26-gauge dark blue Artistic Wire as an accent. Created by: Amy Mickelson 1. Use heavy-duty cutters to cut memory wire. 2. Lashing the beads onto the memory from the center outward allows you to keep half of the wire needed on the spool, making the wire wrapping easier to manage.

Read More

Fold-Formed Earrings Tutorial

Created by: Polly Nobbs-LaRue 1. Jewelry Lab: 52 Experiments, Investigations and Explorations in Metal has a great tutorial on fold forming. 2. To make a matching pair of earrings, cut 2 squares or rectangles of silver sheet, and fold each in half as precisely as possible. Use a nylon hammer to flatten the fold. Then cut a design (half an oval, half a teardrop, etc.) out of paper, and use the template to trace and cut out matching shapes on the folded edge of each piece of metal.

Read More

Sagittarius Leather Bracelet

Design Options: Substitute a traditional birthstone colored crystal to replace the icy White Opal used in this design. There are many other charms that could replace the zodiac; have fun finding the one that best suits you! Black, natural or other colors of leather would work nicely in this design.

Read More

Sonya Snow Skater Necklace Tutorial

Created by: Amy Mickelson 1. Cut the metal sheet to the desired size. File the edges smooth and punch holes in corners and on the bottom. Sand the surfaces and clean. 2. Place inked rubber stamp on flat surface, ink side up. Press the metal piece onto stamped image and remove.

Read More

Cognitive Resonance Pendant Tutorial

Wear safety glasses when cutting, drilling or punching. Lay out pattern; carefully set aside, away from your hammering surface. Decide the size rivets you'll need for each hole. This depends on two factors. The watch parts: Some have a large hole and will only work with larger gauge wire and/or in combination with other gears or beads used as spacers or fillers. Others have a small hole or are too hard to punch with the plier punch. The plier punch can...

Read More

Wavy Gravy Necklace Tutorial

Created by: Polly Nobbs-LaRue 1. This simply strung repeating pattern necklace has a finished length of 18"". The wavy disk beads give the design extra dimension and texture.

Read More

Poppy Field Pendant Necklace Tutorial

Created by: Mollie Valente 1. Select and clean two matching glass pieces. 2. Select an image and cut it to match the glass shape and size. 3. Carefully wrap the glass with copper-foil tape. To create a tight seal, burnish the foil to the glass (a Sharpie pen handle makes a great burnishing tool).

Read More

Easy as Pie Napkin Ring Tutorial

TierraCast's Wire Hoops aren't just for earrings and charm-holder pendants -- they're also a great size for napkin rings! Create autumn-themed napkin holders with TierraCast's limited-edition pumpkin charms.

Read More
See More Ideas