null

609 results for 'TierraCast Leather Working Tools'

Suggestions:

Did you mean: tierracast leather walking tool Refine Search

Categories

Brands

EURO TOOL , TierraCast , Tool Magic

News & Information (609)

    Simple Leather Leaf Bracelet(Post)

    Created by: Guest Designer Deb FlorosSuggested Supplies 1 #61-130-05-01 Greek Leather Cord, 1.5mm, 5 Meter - Natural (Each)2 #F1CC-6RNR Nunn Design Antique Copper-Plated Pewter 27mm Metal Tube Bead1 ...

    Breathe - Riveted Leather Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsSet link on leather bracelet, and use a sharp pencil, or fine-point non-smudging marker, to make a dot at each spot to punch.Rotate leather hole punch to sma ...

    Belle Starr Leather and Turquoise Bracelet Tutorial(Post)

      Created by: Mollie Valente   Designer TipsStart with extra leather and thread, cutting off any excess is better than not having enough.For security, add additional stitches on the first a ...

    Leather 101(Post)

    Leather continues to be a powerhouse material in jewelry fashions --especially bracelet design! Learn about various types of leather (from straps to cord to finished cuffs), and find tutorials and pr ...

    TierraCast Succulent Tassel Earrings Tutorial(Post)

    Created by: TierraCastDesigner TipsMeasure 48" of 1mm cotton cord and cut into 2, 24" pieces. Wrap around fingers 5 times and tuck top of wrap into cord end. Secure with glue or crimping.Twist each o ...

    TierraCast Nesting Bracelet Tutorial(Post)

    Design by: Katie Hill (TierraCast)Designer TipsTIP: Don’t stretch the cords when knotting. Tie with cord relaxed, but with extra slack taken up.Cut three 12" strands of elastic cord. Pull on the ends ...

    2 Easy Celtic Knot Bracelets Tutorial(Post)

    These bracelets are almost too easy!  Created by: Polly Nobbs-LaRueDesigner TipsSet the TierraCast Rivetable or Link in the center of the leather bracelet and use a fine-point permanent mar ...

    Just Peachy Leather Necklace Tutorial(Post)

    Created by: Bridget AustinDesigner TipsSee the Jewelry Basics 101 PDF for hints and instructions on how to open and close jump rings.The cord ends and barrel beads are all crimped, no glue required!S ...

    Sand Dollar Leather Bracelet Tutorial(Post)

    This stylishly simple bracelet looks great worn alone, or with other bangles or leather bracelets.  Created by: Sondra Barrington   Designer TipsCut leather flush after measuring. Use a dab ...

    Tree of Life Leather Bracelet Tutorial(Post)

    Created by: Sondra Barrington This design uses a pearl bead (one of June's birthstones). Use a pearl bead from your bead stash to create this design as-is, or substitute other charms, beads, or birth ...

    Sagittarius Leather Bracelet(Post)

    Created by: Sondra Barrington Designer TipsCut leather flush after measuring desired length. Use a dab of glue inside one cord end. Insert leather into the cord end and gently pinch the cord end ...

    Campfire Skies - Riveted Barrette Tutorial(Post)

    TierraCast's shimmering antique bronze leather, a hammer-textured spiral link, and shiny black rivets, combine to create a barrette that's perfect for Spring bonfires and Fall festivals. This securel ...

    In the Moment Leather Cuff Bracelet Tutorial(Post)

    Created by: Mollie Valente   Designer TipsCustomize the word blank:Place the word blank on the steel block and create a dappled texture with the ball peen side of the chasing hammer.Use the brac ...

    Leather Petal Earrings Tutorial(Post)

    You may have seen some fun leather earrings cut out in the shape of a petal. Why not take it a step further and add some extra pizazz! Just adding some chain and a couple of crystals gives them a lit ...

    Pearl and Tassel Charm Leather Bracelet Tutorial(Post)

    Created by: Sondra Barrington Designer TipsThe ring connector is the focal of this bracelet. For a more free-flowing design, attach charms to the leather cording.Wire-wrap a pearl bead with a la ...

    Palomita Wrapped Leather Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsCast silver star beads and Bali-style flower beads make wonderful riveted accents. If a bead's hole isn't quite large enough, center the bead on the 1/16" cu ...

    Botanical Bird Necklace Tutorial(Post)

    Created by: Summer MelaasDesigner TipsFollow wire-wrapped loop instructions in Jewelry Basics 101 (PDF) to create wire-wrapped link sections with the crystal beads. Be sure to add the various compone ...

    TierraCast Bee Bracelet Tutorial(Post)

    Created by: TierraCastDesigner TipsCut 20" of 1.5mm cord in your choice of color and cut again into 2 pieces, one 12" and one 8".Feed one open end of each cord through each end of honeycomb link (as ...

    Sandra Leather Bracelet Tutorial(Post)

    Created by: Rita Hutchinson   Designer TipsSqueeze out a few drops of patina (or your favorite metallic acrylic paint) on the craft sheet. Apply patina to the edges of the cuff, and then dry-bru ...

    Leather and Stone Lashed Wrap Bracelet Tutorial(Post)

    Created by: Cindy Morris Designer TipsThis exclusive Rings & Things wrapped leather bracelet kit contains everything needed to make one triple-wrap bracelet with parts to spare. It can also ...

    Trio of Pearls - Leather Bracelet Tutorial(Post)

    Created by: Sondra Barrington   Designer TipsAdd a pearl to one end of the cord, and tie a simple overhand knot on each side of the pearl. Use an awl to help pull the knots tight up against the ...

    TierraCast Monstera Trio Bracelet Tutorial(Post)

    Created by: TierraCastDesigner TipsCut cord into 3 12" pieces. String one button onto each cord, then string 3 hole bars and barrel beads. Position as desired, then lightly crimp barrel beads in plac ...

    Tough Girl Rhinestone Chain and Leather Bracelet Tutorial(Post)

    Created by: Rita Hutchinson   Designer Tips  Measure your rhinestone chain pieces to the same length for best results.Use an awl to pierce holes in the leather, and sew the chain to the cuf ...

    Skull Kid Leather Wrapped Bracelet Tutorial(Post)

    Created by: Jaci BostonDesigner TipsCreate a template from a copyright-free image.Glue your image pattern to the metal with rubber cement, and cut along the pattern with a jeweler's saw.Keep the saw ...

    Wintry Mix Ink Stamped Leather Bracelets Tutorial(Post)

    Created by: Amy MickelsonDesigner TipsUse StazOn® ink and rubber stamps of your choice to create a festive bracelet in minutes.Choose from ready-made leather bracelets or leather strips.Since the Sta ...

    TierraCast Bee Earrings Tutorial(Post)

    Created by: TierraCast   Designer TipsTwist open loops of niobium earring hooks and feed an open end through the top of each honeycomb charm. Twist closed.Open each jump ring by twisting open an ...

    TierraCast Monstera Bracelet Tutorial(Post)

    Created by: TierraCastDesigner TipsPre-stretch cord. Attach center of cord to button shank with Larks-Head knot, then tie overhand knot.* String nugget spacer onto both cord ends then tie second knot ...

    Bubble Wand - Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsCut a 10" piece of wire.To straighten and harden the wire, run the length of the wire through the nylon pliers.Use the ring mandrel to form a "bubble" loop (our ...

    TierraCast Succulent Post Earrings Tutorial(Post)

    Created by: TierraCastDesigner TipsPlace one bicone, one 8-10mm amethyst rondelle and another bicone onto eye pin. Cut remaining eye pin with wire cutters, leaving .25" to form into loop to close. At ...

    TierraCast Luna Moth Necklace Tutorial(Post)

    Created by: Tracy Proctor of TierraCastDesigner TipsString 8mm gemstone pebble bead and 1 gold spacer onto head pin. Bend wire over at top of spacer and use round nose pliers to form a 1/8" simple lo ...

    TierraCast Luna Moth Earrings Tutorial(Post)

    Created by: TierraCastDesigner TipsCut a 6" piece of fine beading wire. String one hex spacer and a size 1 crimp bead onto both ends, forming a 1/4" loop at the center of the wire (this will be the t ...

    Belle of Ireland Necklace Tutorial(Post)

    Created by: Liz GrafDesigner TipsMeasure and cut cotton cord to 20".Cut 2 sections off the chain (10 links each section).Pick out six 4mm jump rings and one 6mm jump ring.Place 8 heishi beads on the ...

    Sunrise Succulents Earrings Tutorial(Post)

    Created by: Veronica Greenwood     Designer TipsChoose the size of chaton to fit into the center of your succulent charm. Using the GS Hypo Cement add a little glue in the center of your ch ...

    Bees and Blossoms Bangle Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRue   Designer TipsOne of the things I love about this bangle bracelet, is that it's extra small, so fits me perfectly. However, that means it doesn't fit many other ad ...

    Anchors Away Crystal Spike Earring Tutorial(Post)

    Created by: Amy MickelsonDesigner TipsThis design uses the TierraCast hook clasp as a design element on the earrings rather than as a necklace or bracelet clasp.To avoid breakage, gently close the ba ...

    Dark Fairy II Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsSince the inside of the cone is hollow, place one of the faceted beads on the headpin before stringing the cone. Next add the wings, head, and halo. This helps ...

    Copper & Purple Love - Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner Tips Set link on leather bracelet, and use a sharp pencil, or fine-point non-smudging marker, to make a dot at each spot to punch.Rotate leather hole punch to s ...

    Celebrations Day of the Dead Tutorial(Post)

    Celebrations Day of the Dead bracelet depicts the musical side of this holiday. The beautiful TierraCast musical charms nicely offset the Swarovski Crystal Mystic Black pearls.Created by: Swarovski's ...

    Metallo Elemento Bracelet Tutorial(Post)

     Created by: Polly Nobbs-LaRue Designer Tips For a small wrist (shown), cut 2 pieces of leather each 5" long. For a standard men's bracelet, cut 2 pieces each 6" long. or measure the w ...

    Isla Tortuga Bracelet Tutorial(Post)

    Created by: Veronica Greenwood   Designer TipsChoose the size of chaton to nestle into the center of your succulent charm. Using the GS Hypo Cement add a little glue in the center of your charm ...

    Men's Cross Bracelet Tutorial(Post)

    Created by: Valorie Nygaard-PouzarDesigner TipsCut the leather at an angle to assist in fitting two ends through the hole of the cross connector. For a better grip on the end of the leather, consider ...

    Tribal Fan Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsDecide which direction to face the (reversible) ethnic fan connectors and charms, and lay out all pieces. Use a medium-large jump ring (approx. 7mm), attach ...

    Wind Dancer Earrings Tutorial(Post)

    Created by: Summer MelaasDesigner TipsCut about a foot of wire and place the wire almost 3/4 of the way in the hole of the feather.Cross wires over each other above the top of the feather. Bend the s ...

    Adjustable Anchor Bracelet Tutorial(Post)

    Created by: Veronica GreenwoodDesigner TipsCut two 18" pieces of leather.Fold one strand in half. Make a larks-head knot by feeding both ends through the loop on the anchor charm, then back through t ...

    Blue Valentines Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsPlace a Swarovski square cushion stone in the bezel setting. Firmly hold the bezel setting (or work on a rubber block). Use the burnisher to carefully push the ...

    12th Man Earrings Tutorial(Post)

    Create a pair of sparkling earrings for your favorite football fan! These take just 5 minutes, and a few basic jewelry tools. No glue required, either!This pair of earrings features a "12" charm, but ...

    Working with Colors(Post)

    Color and LightPeople see color differently no matter what, but the following factors also affect the way colors look:The quality of light (natural daylight, incandescent, fluorescent, etc.)The amoun ...

    Ultra Simple Blue Rivoli Earrings Tutorial(Post)

    These sparkling earrings use only 3 components, and 2 common pairs of jewelry pliers (available individually or in a kit). Ultra Blue AB is a vivid blue coating added to a Swarovski rivoli crystal. 1 ...

    Camping Out Necklace Tutorial(Post)

    Created by: Rita Hutchinson Designer TipsCut 3 lengths of deer hide (I used 9" pieces). Fold each length in half and tie each to the acetate ring with a larks-head knot.Add large-hole "Toasted M ...

    River Blossom Bracelet Tutorial(Post)

    Create this project using large-hole gemstone beads of your choice, 1mm cotton or leather cord, and your favorite button as the clasp.Created by: Rita HutchinsonDesigner TipsCut cording and fold in h ...

    Cowrie Micro Macrame Bracelet Tutorial(Post)

    Created by: Michelle HorningDesigner TipsFor step-by-step instructions on creating a macramé bracelet, see How to Macramé a Hemp Bracelet.The pattern for this bracelet is:5 P 5 P 5 P 5 P - 3 C 1 P 1 ...

    Bermuda Blue Earrings(Post)

    Created by: PRESTIGE CrystalSuggested Supplies1 #34-042-0-GM TierraCast Niobium Ear Wires w Round and Heishi Beads, Raw Sterling/ Black (pair)2 #49-958-73-AP TierraCast Antiqued Pewter Plated Jardin ...

    Fireblossom Earrings Tutorial(Post)

    Created by: Rita Hutchinson  Designer Tips Determine desired loop lengths and cut leather. For these earring, I cut 2 pieces at about 5" and 2 pieces at about 3".String large-hole gemstone on ...

    Blue Halo Earrings Tutorial(Post)

    Created by: Veronica GreenwoodDesigner TipsPlace the crystal in the bezel setting and using the nylon jaw flat pliers gently fold the prongs down over the crystal.Using the 6.5mm jump ring attach the ...

    Blooming Lotus Earrings Tutorial(Post)

    Created by: Mollie Valente Designer TipsAttach the eye pin loop to the crystal pear charm (twist loop open and closed).String on beads in the following order: 3mm silver-plated heishi bead, ...

    Boho Barbie Earrings Tutorial(Post)

    Created by: Laurel NewnhamDesigner TipsCut wire into two 16" lengths, one for each earring. Trim excess as needed.Hold wire tightly to create loops that are closer together.Experiment with the positi ...

    Bermuda Crescent Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCut 4 lengths of chain, each 4 links long.Use 4.5mm jump rings to attach chain to the top holes of the crescent link. For best way to open and close loops, see ...

    Feathered Fabulous Dangly Earrings(Post)

    Created by: Guest Designer Deb FlorosSuggested Supplies1 #44-153-9 17x25mm Gunmetal Triangle Filigree (12 Pieces)6 #44-940-81-GM TierraCast Black Gunmetal Plated Small Feather Charm (Each)1 #34-061-1 ...

    Costa Rica Bracelet Tutorial(Post)

    Created by: Swarovski's Create Your Style Design TeamDesigner TipsIf using the bulk cable chain, measure desired length, use 2 pairs of chain-nose pliers to open link at desired length, attach one en ...

    Abstract Painted Cuffs(Post)

    Created by: Guest Designer Deb FlorosSuggested Supplies 1 #51-810-05-17 Leather Cuff Bracelet, 1/2" - Lagoon (Each)1 #51-810-05-01 Leather Cuff Bracelet, 1/2" - Natural (Each)1 #51-810-05-04 Leather ...

    Bejeweled Necklace Tutorial(Post)

    Created by: Cindy Morris Designer TipsClose the hoop. Lash the rhinestone chain onto the hoop using Artistic Wire, wrapping around the hoop twice between each link of chain.Start and end the cha ...

    Double Wrap Hammered Rings Tutorial(Post)

    Depending on the beads you use, this quick and easy unisex design can go from frilly and feminine to macho and masculine.Created by: Michelle HorningDesigner TipsFor step-by-step instructions, see th ...

    Jet Scarab Copper Ring Tutorial(Post)

    Depending on the beads you use, this quick and easy unisex design can go from frilly and feminine to macho and masculine.  Created by: Michelle Horning   Designer TipsFor step-by-step instr ...

    Cerulean Seas Pendant Tutorial(Post)

    Created by: Veronica GreenwoodDesigner TipsPlace 12mm rivoli in bezel setting and gently bend prongs over crystal using needle nose pliers.With a piece of 24-gauge wire, make a wrapped loop making su ...

    Hexed Wire Bracelet - Tutorial(Post)

    Learn a simple and sparkling way to make bangle bracelets with hex wire. No soldering or wire wrapping required!Created by: Rita HutchinsonDesigner TipsUnroll and straighten enough wire for all brace ...

    Crystal Angel Earrings Tutorial(Post)

    Designer TipsAdd a cone bead (wide side first) to a head pin. Next add a wing bead, round crystal bead, and the rhinestone wheel bead (halo).Make a simple loop at the top of the head pin. For best wa ...

    Devoted Wire-Wrapped Crystal Pendant Tutorial(Post)

    This project uses Swarovski crystals. Created by: Amy MickelsonDesigner TipsCut a length of wire 20" long, or longer if desired. It is better to have plenty of wire for wire-wrapping the heart pendan ...

    Hibiscus Flower Earrings(Post)

    Created by: PRESTIGE CrystalSuggested Supplies1 #34-962 Argentium Silver French Hook Earring Wires, Plain (pair)1 #37-722-3 Silver Plated Eye Pin, 2", Standard (Pack)2 #49-947-11-WB TierraCast Interm ...

    Champagne Wishes and Mermaid Dreams Earrings Tutorial(Post)

    Created by: Veronica Greenwood Designer TipsCut 6 inches of wire and make a small wrapped loop on one end. Make a small loop so the size 11 seeds do not go through.New to jewelry-making? For ste ...

    Wickedly Simple Wire Wrapped Ring Tutorial(Post)

    Created by: Michelle HorningDesigner TipsFor step-by-step instructions -- with detailed photographs -- for making wickedly simple wire-wrapped rings with beads and 22-gauge wire, see our tutorial at ...

    Dragonfire Men's Wrapped Bracelet Tutorial(Post)

    The classic wrapped leather bracelet is a great men's bracelet style already, and becomes even more masculine when you use leather bolo cord for the base.We ran out of 12mm Dragon Blood Jasper beads ...

    Wrapped in Rhinestone Lashed Bracelet Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsFor a step-by-step tutorial with images, see the Easy to Make Lashed Rhinestone and Leather Bracelet blog post.Cut your leather to length (twice the wrist lengt ...

    Autumn Waterfall Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRue   Designer Tips3 sunny shades of orange crystal bicones cascade in a warm ombre waterfall, from Vintaj hammered brass rings.Make wire-wrapped loops using ball-end h ...

    Tschinkel's Circles Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsLay out a pattern on the blank bracelet. Free-hand, or using a ruler, mark each spot using an awl or an extra-fine point marker. (The heishi beads pictured a ...

    Corralled Pearls Necklace Tutorial(Post)

    For their safety and your health, pearls and shells should always be drilled, reamed, etc underwater.Created by: Rita HutchinsonDesigner TipsCut a small piece of leather to test the hole sizes as you ...

    Dragonfly Drop Earrings(Post)

    Created by: PRESTIGE CrystalSuggested Supplies 1 #37-295-460 Sterling Silver Jump Ring, Round - 6mm, 20.5-gauge (10 Pieces)1 #34-569-04 TierraCast Sterling Silver Earring Hook with 2mm Bead (pair)1 ...

    Basketball Finals - DIY Team Colors Bracelet(Post)

    C'est La Vie Finals BraceletWhether you defy history, or regularly make history, we've got your colors -- over 80 colors to choose from, and a nice variety of frame setting options.Created by: Polly ...

    Infinite Path Bracelet Tutorial(Post)

    Created by: Kameron FoxDesigner TipsThese earrings and matching bracelet were created using the step by step instructions on page 92 of Beautiful Wire Jewelry for Beaders: Creative Wirework Projects ...

    Soar With Me Cuff Bracelet Tutorial(Post)

    Created by: Valorie Nygaard-PouzarDesigner TipsPatina, seal and use bracelet-bending pliers to apply a gentle curve to the metal sparrow before riveting it to the leather.For hints on applying Vintaj ...

    Samba Scarlet Smile Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRue Designer TipsLinks Updated!Use a nylon hammer to gently flatten the rock & roll oval link before stamping the plain side.Stamp a practice pattern on paper to ma ...

    Briolette and Vine Earrings Tutorial(Post)

    Created by: Cindy MorrisDesigner TipsAdd a bead cap, 6mm aventurine gemstone bead, and another bead cap to the eye pin, and make a simple loop. New to jewelry-making? See Basic Jewelry-Making Techniq ...

    Flowers Cove Viking Knit Necklace Tutorial(Post)

    Created by: Amy ScaliseDesigner TipsFollow the instructions that come with the Lazee Daizee™ to create a Viking knit necklace using 20-gauge wire. The 16" necklace uses about 8 yards of wire.Use 28-g ...

    Having a Ball Bracelet Tutorial(Post)

    Created by: Valorie Nygaard-Pouzar   Designer Tips  Measure the distance from the centermost point of the ball chain (this size is .25") and mark the increments on the back of the leather b ...

    Tethered - Lanyard Tutorial(Post)

    The key to making masculine jewelry is using masculine supplies and keeping it simple. Combine strong leather or waxed cotton cord with bone beads, metal beads, or glass trade beads and then add a bo ...

    Blue Pin Stripe Lashed Memory Wire Bracelet Tutorial(Post)

    This project uses durable, springy memory wire as the base, and 26-gauge dark blue Artistic Wire as an accent. Created by: Amy MickelsonDesigner TipsUse heavy-duty cutters to cut memory wire.Lashing ...

    Great Odin's Raven Viking Knit Bracelet Tutorial(Post)

    Created by: Jaci BostonDesigner TipsFollow the instructions that come with the Lazee Daizee™ to create two Viking knit sections for the bracelet.The Lazee Daizee™ accommodates various sizes of wire.

    Beachy Panel Bracelet & Earrings Set(Post)

    Created by: Guest Designer Deb FlorosSuggested Supplies 1 #40-090-34-3 Silver Plated Disk & Loop Chain, 7mm by the FOOT1 #05-817-LTU8 PRESTIGE 5817 8mm Crystal Pearl Cabochon Crystal Iridescent ...

    Fly Bee! Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsPunch 1/16" holes in the bracelet where you want to place the rivets.Run the first rivet through the leather, place a washer on it, and use a fine-point Shar ...

    Custom Anniversary Bracelet Tutorial(Post)

    Learn how to make a leather anniversary bracelet using porcelain number beads to "spell out" a custom anniversary date (7/7/90).Created by: Polly Nobbs-LaRueDesigner TipsUse a finished leather bracel ...

    Red Vines and Nibs Bracelet Tutorial(Post)

    Created by: Jaci BostonDesigner TipsSee step-by-step blog article: How to make wrapped leather braceletsStart with extra leather and thread; cutting off any excess is better than not having enough.Fo ...

    Cardio Amour Wire Necklace Tutorial(Post)

    Created by: Mollie Valente Designer TipsFor illustrated step-by-step instructions for this necklace, please see the full Heartbeat Necklace Tutorial in our blog.Suggested Supplies 1 ea ...

    Easy Pearl Lariat Tutorial(Post)

    Created by: Rita Hutchinson Just 3 parts total: leather cord, leather-hole pearls, and a link about the size of a quarter (around 25mm). Choose from a wide variety of link options in sterling silver ...

    Big Bold Pearls as Tassels - Necklace Tutorial(Post)

    Created by: Sondra BarringtonDesigner TipsCut approximately 25" of cord, add a pearl, and tie a simple overhand knot at one end. Pull the knot tight, then pull the pearl up against this knot and add ...

    Easy Peasy Lariat Tutorial(Post)

    Created by: Rita Hutchinson Just 3 parts total: leather cord, leather-hole pearls, and a link about the size of a quarter (around 25mm). Choose from a wide variety of link options in sterling silver ...

    Baptized by Fire Bracelet Tutorial(Post)

    Created by: Lindsey GreenDesigner TipsMix and match the crosses in any way you would like! No pattern is required.Adjust the length of the leather pieces and number of jump rings to change the size o ...

    Swirly Hammered Wire Rings Tutorial(Post)

    Created by: Michelle HorningDesigner TipsSee Rustic Wire Ring blog article for illustrated step-by-step instructions for making this style of ring.Hide the cut ends of the finer gauge of wire, on the ...

    Upcycled Cog Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsWhenever walking, watch for unusual/interesting metal objects on the ground! When they are an unknown metal, do not try antiquing them or punching holes with ...

    Mehandi Coil Bracelet Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsUse shears to cut flat wire. Texture as desired with texturing hammer or metal stamps.Create coil by wrapping at an angle around large barrel of bail making pl ...

    Avocado Dorado Cuff Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsSolder Brass Ninja Star* to Copper Disk:If the copper or brass shapes are bent, straighten them with a steel block and nylon or rawhide mallet. (Solder doesn ...

    It's So Fluffy! Bracelet Tutorial(Post)

    The unicorn charm pictured in this bracelet is a limited-edition charm. When it's gone, please see link at bottom of page, for more fantastical charms and beads including unicorns, dragons, gargoyles ...

Products (0)

Filters
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Total: items /

Adding your products to cart

View Cart Continue Shopping

Featured Products

Which Glue is Best? For the most durable bond, we almost always recommend epoxies rather than other types of glue, but it depends on a few factors... Check out the options, plus tips for successful glue bonds, on our Adhesives and Jewelry Glues page. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Which Glue is Best? For the most durable bond, we almost always recommend epoxies rather than other types of glue, but it depends on a few factors... Check out the options, plus tips for successful glue bonds, on our Adhesives and Jewelry Glues page. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Magnet, Round, 18mm (35 Pieces)

$9.67
Which Glue is Best? For the most durable bond, we almost always recommend epoxies rather than other types of glue, but it depends on a few factors... Check out the options, plus tips for successful...
Add to Cart
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help! See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

14kt Gold-Filled Lobster Clasp, 10mm (Each)

$2.64
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!
Add to Cart
Using a steel hammer on steel stamps, can damage (or even shatter!) your metal stamps, and is likely to bounce and give you the dreaded double impression. This is why we recommend always using brass hammers to hit steel stamps. Brass is a softer metal than steel, so don't worry when your brass hammer head gets dented (this is normal). See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

ImpressArt Metal Stamping Hammer, Stubby (Each)

ImpressArt

$20.80
Using a steel hammer on steel stamps, can damage (or even shatter!) your metal stamps, and is likely to bounce and give you the dreaded double impression. This is why we recommend always using brass...
Add to Cart
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

Leather Cuff Bracelet, 1" - Denim (Each)

$4.13
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!
Add to Cart
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help! See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

Leather Wrap Bracelet, 1/2" - Natural (Each)

$7.23
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!
Add to Cart
Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm (inner diameter). To create an antiqued look on raw brass, apply an oxidizing solution. Raw brass is not quite as shiny as most plated finishes. To make your raw brass items shinier, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.If desired, add a sealant or glaze. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm (inner diameter). To create an antiqued look on raw brass, apply an oxidizing solution. Raw brass is not quite as shiny as most plated finishes. To make your raw brass items shinier, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.If desired, add a sealant or glaze. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

22mm Brass Filigree, Wavy Square (12 Pieces)

$1.05
Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm...
Add to Cart
Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm (inner diameter). To create an antiqued look on raw brass, apply an oxidizing solution. Raw brass is not quite as shiny as most plated finishes. To make your raw brass items shinier, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.If desired, add a sealant or glaze. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm (inner diameter). To create an antiqued look on raw brass, apply an oxidizing solution. Raw brass is not quite as shiny as most plated finishes. To make your raw brass items shinier, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.If desired, add a sealant or glaze. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Brass Filigree, Small, Oval, 4 Loops (12 Pieces)

$1.13
Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm...
Add to Cart