Beads can be strung onto the bottom of the anchor cords before anchoring to the board, and slid into place as you work
Tight knots make it difficult to sew the tails back into them, and you can break your needle. You will most likely need to use pliers to get the needle through. Make sure to sew the tail back through the entire section of knots to ensure that it doesn't back out.
The length of cord to cut for the clasp says 12" in the tutorial, but this leaves little to work with at the end, so I increased it to 18".
Separating the ends of the cord with a needle makes a nice tassel.
Laguna Lace Agate varies from bead to bead. For this bracelet, I picked out 9 of the lightest beads, and saved the darker beads for other projects.
1 strand #21-001-590-02 (use 9 beads) Laguna Lace Agate Gemstone Beads, 8mm Round with Large Hole
1 pack (use about 114" of gray) #61-214-20-004 Hemp Cord, 20lb Test - Earthy Pastel Color Mix
#69-271 Tool Set (use the tweezers and chain-nose pliers)
Thimble, Glue, Clip Board, Binder Clips
For additional colors and sizes, or similar items, click into the "Related Products" tab of any item.