Remember Murphy's Law! Before gluing or otherwise applying any chemical to every piece of your best customer's 1,000-piece order, we strongly recommend that you test the chemical(s) on a small sample of the goods.
Whenever possible, use a file to roughen smooth surfaces. This gives a stronger grip.
Clean both surfaces to be joined. We recommend using isopropyl alcohol and a cotton swab in a well-ventilated area.
Why is it so important to clean the surfaces? During the manufacturing process, metal findings are coated with oil. They are degreased, but normally still have a small amount of oil left on the surface.
Follow each adhesive's directions carefully when using.
It's best if you can provide a dry, dust-free, well-ventilated environment when gluing. This helps assure a secure bond. Extreme temperatures might affect the drying time.
Store all adhesives in a cool place.
MSDS (Material Safety and Data Sheets)available upon request for all glues that we sell.
[{"urlcomponent":"Glue-On-Bails-and-Pendant-Plates","name":"Glue On Bails and Pendant Plates","img":"/core/media/media.nl?id=27531&c=727211&h=b19447cc941106461b6f"},{"urlcomponent":"Jewelry-Bails","name":"Jewelry Bails","img":"/core/media/media.nl?id=347058&c=727211&h=ff77fb59f924e7988a97"},{"urlcomponent":"Two-Part-Epoxy-Glues","name":"Two-Part Epoxy Glues","img":"/core/media/media.nl?id=54346&c=727211&h=66b73a079e72a9a87992"}]
Assortment of approximately 17x6.5x4.3mm cast small rectangle bails for glass drop gluing. Plated over zinc. Accommodates drops 2.5mm or thicker. We recommend 2-part epoxy to affix items to bail. Designed with an offset loop. Fits chain or cord up to 2.7mm. Each assortment is a random mix of appropriate in-stock colors. Mixes will vary from batch to batch.
These glue on bails are well made and are of a simple yet handsome design. Knowing is would be a random mix, my only complaint is that out of 72 bails, I had only two gold finished bails. The rest were a good selection of the colors shown.
