|
TierraCast Silver Plated Leather Rivets, 3/32" dia
How to set Rapid Rivets, TierraCast rivets and other popular 2-part rivets for leather:Punch and layer the components to be riveted, run the rivet stem through the layers (from the bottom), and set on an anvil or block. Set the rivet cap over the rivet stem, and place the curved end of a rivet setter over the cap. Use a brass hammer to strike the rivet setter firmly, but not so hard that you bend the rivet. Check to make sure it's secure. (Tap again if it's not.) See Related Products tab for products and projects that go with this item.
TierraCast Silver Plated Leather Rivets, 3/32" dia
☆ Rising Star
0 Reviews /
Avg Rating: 0 /10
Silver plated TierraCast® leather rivets. Each compression rivet set includes a 4mm cap (2.4mm diameter) and a 5mm post (1.8mm diameter). Typically used with leather, these 2-part compression rivets (sometimes called snap rivets) are thicker than most wire rivets. Punch a hole approximately 3/32" -- exact hole size varies depending on the material you are using. Questions? Call our friendly sales staff at 1-800-366-2156, or email us.
Sold by: tens
Quantity Available: 53
Stock Status: 53
|
|
|
|