null

662 results for 'Gunmetal Jewelry Links Filigrees and Connectors'

Filter By

Close

Refine by

No filters applied
Apply Filters

Suggestions:

Did you mean: gunmetal jewelry long filigree connector Refine Search

Categories

News & Information (657)

    Off the Map Cuff Links Tutorial(Post)

      Created by: Mollie Valente   Designer TipsSeal the front and back of the images with Crafter's Pick™ The Ultimate adhesive or Mod Podge® to prevent the images from bleeding.To prevent the ...

    Milky Way Cuff Links Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCut the images to size.Seal with packing tape and cut out.Adhere to bottle cap with Hypo Cement.Apply UV resin following package instructions.Attach cuff link ...

    Eclipse Cuff Links Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsClip the loop off both moon charms, file smooth, and sand with a 600 grit polishing cloth.Use a dapping block to gently dome the moon charms.Soft solder each mo ...

    Spiders and Skulls Jewelry Set Tutorial(Post)

    Created by: Liz GrafDesigner Tips - For Necklace:String crystals, skull beads, and beads on beading cable. Finish each end with a crimp tube and wire protector.Attach spider charms with jump rings to ...

    Dark Skies Enameled Pendant Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsUse dapping block to shape blank.After dapping, punch 1/16" hole using the smaller (silver) side of a EuroTool "helicopter" punch.Clean blank with penny brite ...

    Bermuda Crescent Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCut 4 lengths of chain, each 4 links long.Use 4.5mm jump rings to attach chain to the top holes of the crescent link. For best way to open and close loops, see ...

    Jewelry Design Gallery(Post)

    Welcome to our new Jewelry Design Gallery! To browse jewelry ideas by category or theme, use the turquoise #tags below (#etched jewelry projects, #enamel projects, etc.) for all projects of a pa ...

    Disco Soul Necklace Tutorial(Post)

    Dance the night away with shining faux kabibi disks, sparkling faceted gemstone beads, and sassy, swinging chain.  Designer TipsCut five pieces of chain: three 3.5"", one 4"" and one 4.25"" ...

    April in Mind Tutorial(Post)

    You might think that mixing these textures wouldn't work, but they look great together! As they move, the larger link shines, and the tiny link sparkles. The CZ charm WAS available in Jet + all 12 bi ...

    Starry Night - Constellation Jewelry(Post)

    Created by: Summer MelaasSo many options for Constellation necklaces!Pick your favorite blank (something thick, like 16-gauge).Find a constellation that you like. For a good star map, search the web, ...

    Sand and Sea Gemstone Jewelry Tutorial(Post)

    This simple strung jewelry design can be worn as a necklace or a wrap bracelet. Bead Stoppers make it easy to test the length of your finished design before crimping ends.Created by: Veronica Greenwo ...

    Botanical Bird Necklace Tutorial(Post)

    Created by: Summer MelaasDesigner TipsFollow wire-wrapped loop instructions in Jewelry Basics 101 (PDF) to create wire-wrapped link sections with the crystal beads. Be sure to add the various compone ...

    Blue Halo Earrings Tutorial(Post)

    Created by: Veronica GreenwoodDesigner TipsPlace the crystal in the bezel setting and using the nylon jaw flat pliers gently fold the prongs down over the crystal.Using the 6.5mm jump ring attach the ...

    Pretty Posy Filigree Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsMix the adhesive according to the manufacturer's instructions.Apply masking tape to the back side of the filigrees. This will prevent the adhesive from leaking ...

    Chakra Colors for Making Jewelry(Post)

    Whether you run a jewelry-making business, or you're making a special gift for yourself or a loved one, here you can find the perfect combination of shapes, sizes and stones to help you create specia ...

    Boho Barbie Earrings Tutorial(Post)

    Created by: Laurel NewnhamDesigner TipsCut wire into two 16" lengths, one for each earring. Trim excess as needed.Hold wire tightly to create loops that are closer together.Experiment with the positi ...

    Tips for Securely Gluing Jewelry(Post)

    Which glue is best?Two-part epoxies are more work, but have excellent durability, for when you really want your designs to last.Super glues are best for surfaces that fit exactly together (no gaps), ...

    Campfire Skies - Riveted Barrette Tutorial(Post)

    TierraCast's shimmering antique bronze leather, a hammer-textured spiral link, and shiny black rivets, combine to create a barrette that's perfect for Spring bonfires and Fall festivals. This securel ...

    Feathered Fabulous Dangly Earrings(Post)

    Created by: Guest Designer Deb FlorosSuggested Supplies1 #44-153-9 17x25mm Gunmetal Triangle Filigree (12 Pieces)6 #44-940-81-GM TierraCast Black Gunmetal Plated Small Feather Charm (Each)1 #34-061-1 ...

    Fitting Jewelry-Making into a Busy Day: A Practical Guide(Post)

    The Challenge of Balancing a Busy Career and Pursuing a Creative Hobby The challenge of balancing a busy career and pursuing a creative hobby is a common one. As a business professional, you ...

    Belle of Ireland Necklace Tutorial(Post)

    Created by: Liz GrafDesigner TipsMeasure and cut cotton cord to 20".Cut 2 sections off the chain (10 links each section).Pick out six 4mm jump rings and one 6mm jump ring.Place 8 heishi beads on the ...

    Diamonds and Lace Filigree Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsMix the adhesive according to the manufacturer's instructions.Apply masking tape to the back side of the filigrees. This will prevent the adhesive from leaking ...

    Twisted, Not Tangled, Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsThis 24.5"" necklace uses 26 twisty bar connectors. Adjust the finished length of the piece by adding or subtracting connectors.Connect all components together ...

    Titanium Octagon Key Ring Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsThese flat-wire octagonal titanium key rings have a nice look and feel, and the octagon Swarovski Strass crystal continues the geometry. (If you it's crazy t ...

    Costa Rica Sunset Bracelet Tutorial(Post)

    This style of jewelry has a variety of names, including "hand chain" and "pirate bracelet". Whatever the name, we think you'll love the colors!Created by: Veronica GreenwoodDesigner TipsCut 2 feet of ...

    Pearls Before Swine Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsCreate a saddle for the pig with two filigrees wrapped around his middle.Use jump rings to connect the two filigrees at the top. Carefully bend the filigrees ar ...

    Fade To Black Skull Necklace Tutorial(Post)

    Created by: Summer Melaas and Sondra BarringtonDesigner TipsFile the drop loops, to give the gluing surface more "tooth". See "Gluing to Metal" Technique Sheet below for additional gluing tips.Mix 2- ...

    Balancing Act Asymmetrical Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner Tips - Earring 1Attach a tiny heart charm to the end of an eye pin. String on a rose-peach pearl and form a simple loop on the end. Then attach to the the end link ...

    Matte Satin Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsStart with plenty of 26-gauge wire, and anchor wire to one side of arc connector. Add 4mm beads and extra lashes between each bead. Finish off the end with add ...

    Unpretentious Princess Earrings Tutorial(Post)

    Created by: Janet BoyingtonThe star of the show, is the Princess-cut pendant! These sweet earrings are elegant and petite. Want to make a larger, flashier pair earrings, or use different colors? Clic ...

    Filigree Gemstone Fabulous Earrings (Post)

    Created by: Guest Designer Deb FlorosSuggested Supplies 1 #44-150-9 30x22mm Gunmetal Filigree, Harvest (12 Pieces) 1 #21-464-893 4mm Diamond Cut Round Gemstone Bead - Fluorite AA - Color Ban ...

    Square on Square Earrings Tutorial(Post)

    The rounded corners of Swarovski's cushion square stone in Rose Water Opal crystal, gently echo the rounded corners of TierraCast's Flora square connector in these gently squared earrings.Created by: ...

    Pearl and Tassel Charm Leather Bracelet Tutorial(Post)

    Created by: Sondra Barrington Designer TipsThe ring connector is the focal of this bracelet. For a more free-flowing design, attach charms to the leather cording.Wire-wrap a pearl bead with a la ...

    Raspberry Beret Necklace Tutorial(Post)

    Technically, this sweet pendant is topped with a strawberry quartz bead, but it's every bit as full of sass as the song it's named after.Created by: Veronica GreenwoodDesigner TipsCut two 8" pieces o ...

    Emerald City Garden Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsFor illustrated step-by-step instructions for making this pair of earrings, and links to additional sweet-and-simple designs, see our blog article: The 15-Minut ...

    U Look Good in Pink Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsThe ""back"" of the U shaped connector is lashed to in this design, because it has a channel that helps to hold the beads in place.Check the spacing of the bea ...

    Peaceful Thoughts Lotus Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner Tips - Part 1: Prepare ComponentsDisassemble the metal mesh choker necklace and temporarily set aside the lobster clasp and metal mesh chain. For best way to open a ...

    Heart Tag and Tassel Chain - Silver Bracelet Tutorial(Post)

    Chain bracelets adorned with a simple heart charm continue to be popular. The sterling silver heart blank was intentionally left blank, but could easily be stamped or engraved. You can further custom ...

    Simple Rhinestone Bracelet Tutorial(Post)

    Designer TipsGently squeeze the prongs on the rhinestone chain ends to prevent chipping.Attach 5mm jump ring to one end. (See Jewelry-Making Basics for best way to open and close jump rings.)Use smal ...

    Breathe - Riveted Leather Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsSet link on leather bracelet, and use a sharp pencil, or fine-point non-smudging marker, to make a dot at each spot to punch.Rotate leather hole punch to sma ...

    Jewelry-Making Materials(Post)

    We strive to provide you with clear, honest information, in a complicated and ever-changing world of jewelry-making materials.Our products are made of over 500 different materials (various semi-preci ...

    Inland Northwest Jewelry Resources(Post)

    Find jewelry-making classes, workshops, bead stores, and jewelry repair shops in the Spokane, Washington, area. Links to Pacific Northwest bead societies and art guilds as well. To be listed as a re ...

    Summer Blues Earrings Tutorial(Post)

    Design by Create Your Style team at Swarovski North America.Although these weren't designed with September in mind, the colors are perfect for September birthstone jewelry.Designer TipsAdd one 4mm li ...

    Graveyard Sweater Guard Tutorial(Post)

    Created by: Liz Graf   Designer TipsMeasure the 3.9mm chain, and cut one 4" piece, and one 5" piece.Measure the 4.5mm chain, and cut a 6" piece.Attach the chains to the sweater guards with large ...

    Water Droplet Earrings Tutorial(Post)

    Created by: Liz GrafDesigner TipsCut 8 links of your selected chain.I deconstructed and used part of a gunmetal chain tassel, or you can use 8 links from some scrap antiqued brass cable chain.Hook Br ...

    Simple Elegance Earrings Tutorial(Post)

    Created by: Summer Melaas   Designer TipsOpen loop at bottom of ear wire. For best way to open and close loops, see Jump Ring Hint in Jewelry Basics 101 (PDF),Slide one connector onto the ear wi ...

    Patriotic Drops Earrings Tutorial(Post)

    Created by: Amy ScaliseDesigner TipsUse the 1-Step Looper to create 36 (12 of each color) crystal pearl dangles.Cut two 1" pieces of chain and attach approximately 2 dangles per link directly onto th ...

    Random Scraps Bib Necklace Tutorial(Post)

    Created by: Valorie Nygaard-PouzarDesigner TipsUse whatever random scraps of chain you have handy, to create this quick and trendy layered chain bib-style necklace.Determine how long you want the lon ...

    Falling Snow Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsBlue Shade crystal snowflakes are coated on one side. Check the pendants carefully to hang both crystals in the same direction.Due to the thickness of the crys ...

    Men's Cross Bracelet Tutorial(Post)

    Created by: Valorie Nygaard-PouzarDesigner TipsCut the leather at an angle to assist in fitting two ends through the hole of the cross connector. For a better grip on the end of the leather, consider ...

    Solje Style Wedding Earring Tutorial(Post)

    Created by: Amy MickelsonDesigner TipsUse jump rings to attach the oval charms to the loops on the filigree connector.Connect the filigree to the loop on the earring post with a 4.5mm jump ring.The f ...

    Silken Bouquet Bracelet Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsDetermine desired length of finished bracelet.Subtract 1 1/4" from total desired length for connector piece.Keeping toggle clasp parts attached, remove center ...

    Red Kite Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsUse fine tip round nose pliers in order to make loops that match the small loops on the eyepins. For looping instructions, see Jewelry Basics 101 (PDF)As you m ...

    Baroque Beauty Necklace Tutorial(Post)

    Designer TipsUsing one eye pin, slide on one 6mm 5328 bicone bead and make a simple loop. Repeat 30 more times and set aside. New to making jewelry? See Jewelry Basics 101 (PDF).Using an eye pin ...

    Egyptian Sun Earring Tutorial(Post)

    Learn how to make earrings that shine like the sun, with beautiful Swarovski crystal scarab beads and crystal Sahara suns!Created by: Summer MelaasDesigner Tips Gold-fill items keep their shine for a ...

    Aquamarine Ocean Earrings Tutorial(Post)

    Created by: Sondra Barrington Designer TipsKeep gold-filled and gold-plated findings separate, and mark your supplies well!Use chain-nose pliers to turn the loop on ear wire 90-degrees so it fac ...

    September Sky Earrings Tutorial(Post)

    Sapphire and sterling silver are a perfect combination. This September birthstone pairing features mini-sized Swarovski crystal briolette pendants, small sterling-silver crescent-moon connector charm ...

    Enameled Hidden Heart Tutorial(Post)

    Created by: Mollie ValenteMake your Enamel DiskUse the dapping set to dome the copper blank.(See Rings & Things blog post: How to Dap and Dome Metal Jewelry.)Fire the concave (back side) of the c ...

    Tassel and Sparkle - Simple Charm Bracelet Tutorial(Post)

    Chain bracelets adorned with a simple charm continue to be popular. You can customize this design by using a different colored Swarovski rivoli stone, different styles of chain, or tassels made of di ...

    Hibiscus Flower Earrings(Post)

    Created by: PRESTIGE CrystalSuggested Supplies1 #34-962 Argentium Silver French Hook Earring Wires, Plain (pair)1 #37-722-3 Silver Plated Eye Pin, 2", Standard (Pack)2 #49-947-11-WB TierraCast Interm ...

    Drops of Light - Pearl Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsFor step-by-step pictorial instructions on making this pair of earrings, see Mollie's blog article: ...

    Winter in Bermuda Bracelet Tutorial(Post)

    Created by: Amy MickelsonDesigner TipsRoughen the pads on the disk and loop bracelet with sandpaper or a sanding sponge. This increases the surface texture to help the glue adhere.If desired, plan yo ...

    Tribal Fan Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsDecide which direction to face the (reversible) ethnic fan connectors and charms, and lay out all pieces. Use a medium-large jump ring (approx. 7mm), attach ...

    Steel Empire Chain Maille Bracelet Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsThis is a variation of the standard Byzantine weave, called Byzantine with 3 connectors. I wanted to use all stainless steel for this bracelet, but the aspect ...

    Gypsy Dancer - Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsColorize the raw brass filigrees. (See Rings & Things blog post "Jewelry DIY - Colorizing Raw Brass Filigrees" for instructions.)Make a bead dangle and atta ...

    Dark Fairy II Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsSince the inside of the cone is hollow, place one of the faceted beads on the headpin before stringing the cone. Next add the wings, head, and halo. This helps ...

    Dumortierite and Copper Coin Necklace Tutorial(Post)

    Created by: Dee MuellerDesigner TipsCreate bead connectors with the 8mm rondelles and 14mm faceted round beads.Cut eight 1" pieces of chain. With jump rings attach two pieces of chain to each of six ...

    Rainbow Lotus Earrings(Post)

    Created by PRESTIGE CrystalSuggested Supplies1 #88-104-08-0 Vintaj Natural Brass Lotus Blossom Connector - 27x22.5mm (2 pcs)1 #05-000-SIALT8 PRESTIGE Crystal, #5000 Round Bead 8mm, Light Siam (1 Piec ...

    Tri-Tone Cuff Bracelet Tutorial(Post)

    Created by: Rita Hutchinson   Designer TipsUsing a pre-cut and finished bracelet blank, and precut 6" patterned wire makes this bracelet assemble in a snap!Apply pattern to copper blank with des ...

    Flying the Nest - Nest Bracelet Tutorial(Post)

    Created by: Kayla HeflingDesigner TipsCreate the bird nests. For step by step instructions with images, see the How To Make A Wire Bird Nest blog post.Use 22-26 gauge wire depending on the hole size ...

    Man in the Maze Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsString three 8mm round gemstone beads on an eye pin.Finish the end of the eye pin with a wrapped loop; snip off the excess eye-pin tail. For step-by-step instru ...

    Choosing Clasps & Finishing Methods(Post)

    Are you asking yourself "What clasp should I use for my bead stringing, wire lashing, kumihimo, multi-strand, chunky chain, awesome creation?"  There are 100's of options, and the "correct" answ ...

    Wire Jewelry 101(Post)

    Jewelry making wire gives you endless choices in creativity! Still, it's easier to get started once you know a few basic tips and terms that will help you determine what type of wire to use for your ...

    Upcycled Cog Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsWhenever walking, watch for unusual/interesting metal objects on the ground! When they are an unknown metal, do not try antiquing them or punching holes with ...

    Fused Spirals Earrings Tutorial(Post)

    Created by: Rita Hutchinson Designer TipsLightly dome (dap) the blank in dapping block.How to Dap (Dome)Clean blank with penny brite and dry.Apply counter enamel to back of blank. Fire and allow ...

    Hootie and the Sodalites Earring Tutorial(Post)

    Learn how to make stamped earrings using an owl stamp, copper findings and orange sodalite gemstones.Created by: Amy MickelsonDesigner TipsChoose a metal design stamp to fit the metal blank.Use tape ...

    Southwest Chandelier Earrings Tutorial(Post)

    Created by: Rita Hutchinson. Designer TipsWhen you trim the eye pins on the 3 bead sections, retain two of the pieces to use for the shorter 2 bead section instead of using another whole eye pin.Open ...

    Spanish-English Jewelry Glossary(Post)

    Glosario español-inglés de términos relacionados a la joyería-bisuteríaSpanish-English    |    English-Spanish Many of us sell to, or buy from, Spanish-speaking countries and peop ...

    Moonshine Earrings Tutorial(Post)

    Created by: Summer MelaasDesigner TipsPunch a hole in the top center of each mason jar blank (available in copper, brass and sterling silver). If desired, tumble-polish or sand the blanks to remove a ...

    Pieces of the Sky Cuff Bracelet Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsTwist open a 4mm jump ring, string it through the crystal link hole, and twist securely closed. Repeat with the opposite side of the crystal link. For best way ...

    Palomita Wrapped Leather Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsCast silver star beads and Bali-style flower beads make wonderful riveted accents. If a bead's hole isn't quite large enough, center the bead on the 1/16" cu ...

    Golden Halos Earrings Tutorial(Post)

    Due to the popularity of 10mm cushion square settings, we've included links to alternate styles below in case the primary setting used in the Golden Halos earrings is temporarily unavailable.  C ...

    Luna Pearl Earrings Tutorial(Post)

    Created by: Summer MelaasDesigner TipsPlace 1 larimar bead, 1 bead cap, and 1 faceted pearl bead on a thin ball-end pin. Wrap it to the tail of the luna moth. New to jewelry-making? See Jewelry Basic ...

    Circles in the Sand Necklace Tutorial(Post)

    This is a lovely summery design with secure wire-wrapped links, and can also double as  November birthstone jewelry (citrines) or June (pearls).Created by: Veronica Greenwood Designer TipsU ...

    Sunshine Squared Necklace Tutorial(Post)

    Created by: Bridget AustinDesigner TipsNo jump rings are needed; all you need are the links from the chain, to combine the sew-on stones and clasp.See the Jewelry Basics 101 (PDF) for instructions on ...

    Sonya Snow Skater Necklace Tutorial(Post)

    Created by: Amy Mickelson   Designer TipsCut the metal sheet to the desired size. File the edges smooth and punch holes in corners and on the bottom. Sand the surfaces and clean.Place inked rubb ...

    Jewelry Safety: Lead Content Classifications(Post)

    At Rings & Things, we work hard with manufacturers and testing agencies to ensure that our products meet the requirements of California's lead-in-adult-jewelry law, the most stringent law in the ...

    Not-So-Shiny Bangle Bracelet(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsUse heavy-duty flush cutters to cut approximately 1 loop from the spool of 12-gauge antiqued copper wire. Make sure both ends are cut flat (flush) so they fi ...

    Flores de Muertos Bracelet Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsUse 4 of each color crystal to create 28 wrapped loop crystal dangles.This finished length is 8.5". Use larger or smaller jump rings to adjust the length.Free ...

    Tethered - Lanyard Tutorial(Post)

    The key to making masculine jewelry is using masculine supplies and keeping it simple. Combine strong leather or waxed cotton cord with bone beads, metal beads, or glass trade beads and then add a bo ...

    Sweet Skull Pendant Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsUsing ball-end head pins, make 8 beaded loop dangles in flowery colors. Use one metal rondelle on each side of the crystal bead for fuller dangles. Wrapped loo ...

    Sagittarius Leather Bracelet(Post)

    Created by: Sondra Barrington Designer TipsCut leather flush after measuring desired length. Use a dab of glue inside one cord end. Insert leather into the cord end and gently pinch the cord end ...

    Trisha Earrings Tutorial(Post)

    If you've never set faceted stones before, tube settings are a great way to get started.Created by: Rita HutchinsonDesigner TipsGolden Topaz is November's birthstone, and sparkling 4mm CZs are availa ...

    Pumpkin on the Vine Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsMake 2 matching spiral head pins. Follow the steps from the Rings & Things blog post "How to Make Spiral Head Pins.Add the following beads to a spiral head ...

    Hammerfall Earrings Tutorial(Post)

    Designer Tips These earrings are easy to assemble, yet put on a great show.Use 10mm jump rings to connect each link, and another 10mm jump ring to attach the dagger bead to the smallest link. Fo ...

    Pearl Wraparound Swarovski Necklace Tutorial(Post)

    Created by: Swarovski's Create Your Style Design TeamDesigner TipsUsing one head pin, slide on one 5844 10mm elongated baroque pearl, make a simple loop and set aside. Repeat 29 more times and set as ...

    Copper & Purple Love - Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner Tips Set link on leather bracelet, and use a sharp pencil, or fine-point non-smudging marker, to make a dot at each spot to punch.Rotate leather hole punch to s ...

    Shaping Up - Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsRemove the clasp from the end of one bracelet, and replace the oval jump ring with a round jump ring.For best way to open and close loops, see Jump Ring Hint i ...

    Easy Peasy Lariat Tutorial(Post)

    Created by: Rita Hutchinson Just 3 parts total: leather cord, leather-hole pearls, and a link about the size of a quarter (around 25mm). Choose from a wide variety of link options in sterling silver ...

    Rings & Things Jewelry Blog(Page)

    Welcome to the Rings-Things blog! We are a world-leading supplier of jewelry-making supplies, offering top-quality products and services to help jewelry makers create beautiful, unique pieces. Whethe ...

Products (5)

Filters
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • This filigree is stamped and then plated. It is lightweight, yet durable, and excellent for earrings and pendants.Many filigrees also work well as connectors and links. Most stamped charms are one-sided, thin, and either flat or slightly domed. Size given is height x width and includes loop. Most loops are 0.8-1.2mm (inner diameter). See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. This filigree is stamped and then plated. It is lightweight, yet durable, and excellent for earrings and pendants.Many filigrees also work well as connectors and links. Most stamped charms are one-sided, thin, and either flat or slightly domed. Size given is height x width and includes loop. Most loops are 0.8-1.2mm (inner diameter). See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Gunmetal Filigree, Oval (12 Pieces)

    $3.00
    This filigree is stamped and then plated. It is lightweight, yet durable, and excellent for earrings and pendants.Many filigrees also work well as connectors and links. Most stamped charms are...
    Add to Cart
    Qty in Cart: 0
    Quantity:
    Price:
    $3.00
    Subtotal:
    Add to Cart
  • This filigree is stamped and then plated. It is lightweight, yet durable, and excellent for earrings and pendants.Many filigrees also work well as connectors and links. Most stamped charms are one-sided, thin, and either flat or slightly domed. Size given is height x width and includes loop. Most loops are 0.8-1.2mm (inner diameter). See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. This filigree is stamped and then plated. It is lightweight, yet durable, and excellent for earrings and pendants.Many filigrees also work well as connectors and links. Most stamped charms are one-sided, thin, and either flat or slightly domed. Size given is height x width and includes loop. Most loops are 0.8-1.2mm (inner diameter). See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Gunmetal Filigree, Tower (12 Pieces)

    $3.07
    This filigree is stamped and then plated. It is lightweight, yet durable, and excellent for earrings and pendants.Many filigrees also work well as connectors and links. Most stamped charms are...
    Out of stock
    Qty in Cart: 0
    Price:
    $3.07
    Subtotal:
    Out of stock
  • Total: items /

Adding your products to cart

View Cart Continue Shopping

Featured Products

Which Glue is Best? For the most durable bond, we almost always recommend epoxies rather than other types of glue, but it depends on a few factors... Check out the options, plus tips for successful glue bonds, on our Adhesives and Jewelry Glues page. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Which Glue is Best? For the most durable bond, we almost always recommend epoxies rather than other types of glue, but it depends on a few factors... Check out the options, plus tips for successful glue bonds, on our Adhesives and Jewelry Glues page. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Magnet, Round, 18mm (35 Pieces)

$9.67
Which Glue is Best? For the most durable bond, we almost always recommend epoxies rather than other types of glue, but it depends on a few factors... Check out the options, plus tips for successful...
Add to Cart
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help! See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

14kt Gold-Filled Lobster Clasp, 10mm (Each)

$2.64
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!
Add to Cart
Using a steel hammer on steel stamps, can damage (or even shatter!) your metal stamps, and is likely to bounce and give you the dreaded double impression. This is why we recommend always using brass hammers to hit steel stamps. Brass is a softer metal than steel, so don't worry when your brass hammer head gets dented (this is normal). See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

ImpressArt Metal Stamping Hammer, Stubby (Each)

ImpressArt

$20.80
Using a steel hammer on steel stamps, can damage (or even shatter!) your metal stamps, and is likely to bounce and give you the dreaded double impression. This is why we recommend always using brass...
Add to Cart
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

Leather Cuff Bracelet, 1" - Denim (Each)

$4.13
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!
Add to Cart
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help! See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

Leather Wrap Bracelet, 1/2" - Natural (Each)

$7.23
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!
Add to Cart
Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm (inner diameter). To create an antiqued look on raw brass, apply an oxidizing solution. Raw brass is not quite as shiny as most plated finishes. To make your raw brass items shinier, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.If desired, add a sealant or glaze. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm (inner diameter). To create an antiqued look on raw brass, apply an oxidizing solution. Raw brass is not quite as shiny as most plated finishes. To make your raw brass items shinier, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.If desired, add a sealant or glaze. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

22mm Brass Filigree, Wavy Square (12 Pieces)

$1.05
Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm...
Add to Cart
Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm (inner diameter). To create an antiqued look on raw brass, apply an oxidizing solution. Raw brass is not quite as shiny as most plated finishes. To make your raw brass items shinier, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.If desired, add a sealant or glaze. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm (inner diameter). To create an antiqued look on raw brass, apply an oxidizing solution. Raw brass is not quite as shiny as most plated finishes. To make your raw brass items shinier, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.If desired, add a sealant or glaze. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Brass Filigree, Small, Oval, 4 Loops (12 Pieces)

$1.13
Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm...
Add to Cart