null

662 results for 'Copper Filigrees Jewelry Links and Connectors'

Suggestions:

Did you mean: copper filigree jewelry lined connector Refine Search

Categories

News & Information (658)

    Boho Barbie Earrings Tutorial(Post)

    Created by: Laurel NewnhamDesigner TipsCut wire into two 16" lengths, one for each earring. Trim excess as needed.Hold wire tightly to create loops that are closer together.Experiment with the positi ...

    Milky Way Cuff Links Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCut the images to size.Seal with packing tape and cut out.Adhere to bottle cap with Hypo Cement.Apply UV resin following package instructions.Attach cuff link ...

    Off the Map Cuff Links Tutorial(Post)

      Created by: Mollie Valente   Designer TipsSeal the front and back of the images with Crafter's Pick™ The Ultimate adhesive or Mod Podge® to prevent the images from bleeding.To prevent the ...

    Eclipse Cuff Links Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsClip the loop off both moon charms, file smooth, and sand with a 600 grit polishing cloth.Use a dapping block to gently dome the moon charms.Soft solder each mo ...

    Copper Sands Earrings Tutorial(Post)

    Created by: Tiffany White Designer TipsOne meter of this chain will make approximately 9-10 pairs of earrings!Place all the crystals onto the head pins and secure with wrapped loops. (New to jew ...

    Copper & Purple Love - Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner Tips Set link on leather bracelet, and use a sharp pencil, or fine-point non-smudging marker, to make a dot at each spot to punch.Rotate leather hole punch to s ...

    Sand and Sea Gemstone Jewelry Tutorial(Post)

    This simple strung jewelry design can be worn as a necklace or a wrap bracelet. Bead Stoppers make it easy to test the length of your finished design before crimping ends.Created by: Veronica Greenwo ...

    Dumortierite and Copper Coin Necklace Tutorial(Post)

    Created by: Dee MuellerDesigner TipsCreate bead connectors with the 8mm rondelles and 14mm faceted round beads.Cut eight 1" pieces of chain. With jump rings attach two pieces of chain to each of six ...

    Arrow - Etched Copper Bracelet Tutorial(Post)

    Created by: Summer MelaasDesigner TipsOptional: Punch a hole in the corner of the blank, following instructions in hole-punch below. After completing bracelet, dangle a charm or beaded dangle of your ...

    Unfurled Copper and Oval Gemstone Necklace Tutorial(Post)

    Created by: Cindy MorrisDesigner TipsSince the gemstones are fairly heavy, use two crimp beads for extra security. Flatten crimps with flat-nose pliers.Use two jump rings for the "S" hook to connect ...

    Bermuda Crescent Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCut 4 lengths of chain, each 4 links long.Use 4.5mm jump rings to attach chain to the top holes of the crescent link. For best way to open and close loops, see ...

    Jet Scarab Copper Ring Tutorial(Post)

    Depending on the beads you use, this quick and easy unisex design can go from frilly and feminine to macho and masculine.  Created by: Michelle Horning   Designer TipsFor step-by-step instr ...

    Jewelry Design Gallery(Post)

    Welcome to our new Jewelry Design Gallery! To browse jewelry ideas by category or theme, use the turquoise #tags below (#etched jewelry projects, #enamel projects, etc.) for all projects of a pa ...

    Go Round-and-Round Enameled-Copper Earrings Tutorial(Post)

    Created by: Mollie Valente Designer TipsMake two enameled copper washers. You can either use the enamel colors of your choice, or the colors listed in the suggested materials. Follow instruction ...

    April in Mind Tutorial(Post)

    You might think that mixing these textures wouldn't work, but they look great together! As they move, the larger link shines, and the tiny link sparkles. The CZ charm WAS available in Jet + all 12 bi ...

    Spiders and Skulls Jewelry Set Tutorial(Post)

    Created by: Liz GrafDesigner Tips - For Necklace:String crystals, skull beads, and beads on beading cable. Finish each end with a crimp tube and wire protector.Attach spider charms with jump rings to ...

    Disco Soul Necklace Tutorial(Post)

    Dance the night away with shining faux kabibi disks, sparkling faceted gemstone beads, and sassy, swinging chain.  Designer TipsCut five pieces of chain: three 3.5"", one 4"" and one 4.25"" ...

    Starry Night - Constellation Jewelry(Post)

    Created by: Summer MelaasSo many options for Constellation necklaces!Pick your favorite blank (something thick, like 16-gauge).Find a constellation that you like. For a good star map, search the web, ...

    Botanical Bird Necklace Tutorial(Post)

    Created by: Summer MelaasDesigner TipsFollow wire-wrapped loop instructions in Jewelry Basics 101 (PDF) to create wire-wrapped link sections with the crystal beads. Be sure to add the various compone ...

    Blue Halo Earrings Tutorial(Post)

    Created by: Veronica GreenwoodDesigner TipsPlace the crystal in the bezel setting and using the nylon jaw flat pliers gently fold the prongs down over the crystal.Using the 6.5mm jump ring attach the ...

    Astral Love Resin Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsSee instruction page for making no-solder bezels.Cut paper to match bezel wire shape.Seal paper and adhere to inside of bezel.Mix a small batch of resin and po ...

    Pretty Posy Filigree Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsMix the adhesive according to the manufacturer's instructions.Apply masking tape to the back side of the filigrees. This will prevent the adhesive from leaking ...

    Chakra Colors for Making Jewelry(Post)

    Whether you run a jewelry-making business, or you're making a special gift for yourself or a loved one, here you can find the perfect combination of shapes, sizes and stones to help you create specia ...

    Northern Copperhead Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Make 6 equal sized coils u ...

    Matte Satin Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsStart with plenty of 26-gauge wire, and anchor wire to one side of arc connector. Add 4mm beads and extra lashes between each bead. Finish off the end with add ...

    Candara Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRue   Designer Tips  Unspool approximately 26" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Use ring-be ...

    Captured Aventurine Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Coil the wire around a 14- ...

    Tips for Securely Gluing Jewelry(Post)

    Which glue is best?Two-part epoxies are more work, but have excellent durability, for when you really want your designs to last.Super glues are best for surfaces that fit exactly together (no gaps), ...

    Fitting Jewelry-Making into a Busy Day: A Practical Guide(Post)

    The Challenge of Balancing a Busy Career and Pursuing a Creative Hobby The challenge of balancing a busy career and pursuing a creative hobby is a common one. As a business professional, you ...

    Avocado Dorado Cuff Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsSolder Brass Ninja Star* to Copper Disk:If the copper or brass shapes are bent, straighten them with a steel block and nylon or rawhide mallet. (Solder doesn ...

    BeDazzled Slinky Bracelet Tutorial(Post)

    Created by: Sondra BarringtonDesigner TipsUse 7 coils of anklet size to make this bracelet bangle. You can adjust the size of wire and numbers of coils any way you wish.Do not use your favorite jewel ...

    Belle of Ireland Necklace Tutorial(Post)

    Created by: Liz GrafDesigner TipsMeasure and cut cotton cord to 20".Cut 2 sections off the chain (10 links each section).Pick out six 4mm jump rings and one 6mm jump ring.Place 8 heishi beads on the ...

    Pearl and Tassel Charm Leather Bracelet Tutorial(Post)

    Created by: Sondra Barrington Designer TipsThe ring connector is the focal of this bracelet. For a more free-flowing design, attach charms to the leather cording.Wire-wrap a pearl bead with a la ...

    Bowl of Peaches Earrings - Tutorial(Post)

    Learn to make sweet earrings with a dapped set of disks in sterling and copper. A tumbler REALLY gets these domed disks shiny! They are reflecting so much light back, that the Rose Peach crystals loo ...

    Twisted, Not Tangled, Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsThis 24.5"" necklace uses 26 twisty bar connectors. Adjust the finished length of the piece by adding or subtracting connectors.Connect all components together ...

    Jewelry-Making Materials(Post)

    We strive to provide you with clear, honest information, in a complicated and ever-changing world of jewelry-making materials.Our products are made of over 500 different materials (various semi-preci ...

    Costa Rica Sunset Bracelet Tutorial(Post)

    This style of jewelry has a variety of names, including "hand chain" and "pirate bracelet". Whatever the name, we think you'll love the colors!Created by: Veronica GreenwoodDesigner TipsCut 2 feet of ...

    An Ode to Ojo Earrings Tutorial(Post)

    Created by: Lindsey GreenDesigner TipsBrushing steel wool lightly over the copper blanks gives them a nice shine and textured look.Free Technique Sheets & How-TosBasic Jewelry-Making Technique Sh ...

    All Seeing COPPRclay® Bracelet Tutorial(Post)

    Created by: Joe HentgesDesigner TipsCreate the COPPRclay centerpiece according to the manufacturer's instructions. Like most other metal clays, COPPRclay must be fired in a kiln. COPPRclay shrinks ap ...

    Not-So-Shiny Bangle Bracelet(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsUse heavy-duty flush cutters to cut approximately 1 loop from the spool of 12-gauge antiqued copper wire. Make sure both ends are cut flat (flush) so they fi ...

    Hootie and the Sodalites Earring Tutorial(Post)

    Learn how to make stamped earrings using an owl stamp, copper findings and orange sodalite gemstones.Created by: Amy MickelsonDesigner TipsChoose a metal design stamp to fit the metal blank.Use tape ...

    Pearls Before Swine Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsCreate a saddle for the pig with two filigrees wrapped around his middle.Use jump rings to connect the two filigrees at the top. Carefully bend the filigrees ar ...

    Carnival Queen Earrings Tutorial(Post)

    Created by: Summer MelaasDesigner TipsPlace 10mm cushion square stone into setting, and use nylon-jaw or chain-nose pliers to gently flatten the prongs onto the stone. See tips in our blog, for best ...

    Balancing Act Asymmetrical Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner Tips - Earring 1Attach a tiny heart charm to the end of an eye pin. String on a rose-peach pearl and form a simple loop on the end. Then attach to the the end link ...

    Floral Intuition Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCreate wire wrapped link with Cacoxenite and Filigree Beads to attach Blossom charm to the shank of the button. New to jewelry-making? See Jewelry Basics 101 ( ...

    A Mustache For Your Wrist Cuff Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsAdjust bracelet to target wrist size/shape, because once the 2nd layer is riveted on, you will have limited adjustability.Texture or stamp the bracelet and/o ...

    Unpretentious Princess Earrings Tutorial(Post)

    Created by: Janet BoyingtonThe star of the show, is the Princess-cut pendant! These sweet earrings are elegant and petite. Want to make a larger, flashier pair earrings, or use different colors? Clic ...

    Campfire Skies - Riveted Barrette Tutorial(Post)

    TierraCast's shimmering antique bronze leather, a hammer-textured spiral link, and shiny black rivets, combine to create a barrette that's perfect for Spring bonfires and Fall festivals. This securel ...

    Square on Square Earrings Tutorial(Post)

    The rounded corners of Swarovski's cushion square stone in Rose Water Opal crystal, gently echo the rounded corners of TierraCast's Flora square connector in these gently squared earrings.Created by: ...

    Moonshine Earrings Tutorial(Post)

    Created by: Summer MelaasDesigner TipsPunch a hole in the top center of each mason jar blank (available in copper, brass and sterling silver). If desired, tumble-polish or sand the blanks to remove a ...

    Metal Etching 101(Post)

    Etching is a method of using chemicals to cut a design or pattern into a metal surface. Etching your own designs into metal is easier than it may sound, and it can be a fun and rewarding way to make ...

    Emerald City Garden Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsFor illustrated step-by-step instructions for making this pair of earrings, and links to additional sweet-and-simple designs, see our blog article: The 15-Minut ...

    Raspberry Beret Necklace Tutorial(Post)

    Technically, this sweet pendant is topped with a strawberry quartz bead, but it's every bit as full of sass as the song it's named after.Created by: Veronica GreenwoodDesigner TipsCut two 8" pieces o ...

    Gypsy Dancer - Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsColorize the raw brass filigrees. (See Rings & Things blog post "Jewelry DIY - Colorizing Raw Brass Filigrees" for instructions.)Make a bead dangle and atta ...

    Jewelry Safety: Lead Content Classifications(Post)

    At Rings & Things, we work hard with manufacturers and testing agencies to ensure that our products meet the requirements of California's lead-in-adult-jewelry law, the most stringent law in the ...

    Peaceful Thoughts Lotus Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner Tips - Part 1: Prepare ComponentsDisassemble the metal mesh choker necklace and temporarily set aside the lobster clasp and metal mesh chain. For best way to open a ...

    Heart Tag and Tassel Chain - Silver Bracelet Tutorial(Post)

    Chain bracelets adorned with a simple heart charm continue to be popular. The sterling silver heart blank was intentionally left blank, but could easily be stamped or engraved. You can further custom ...

    Palomita Wrapped Leather Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsCast silver star beads and Bali-style flower beads make wonderful riveted accents. If a bead's hole isn't quite large enough, center the bead on the 1/16" cu ...

    Funky Bohemian Spike Set Tutorial(Post)

    Created by: Tiffany WhiteDesigner TipsCut three pieces of 20-gauge copper wire, each 6" long.Make a wrapped loop at one end of each wire.For step-by-step illustrated instructions, see our blog articl ...

    U Look Good in Pink Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsThe ""back"" of the U shaped connector is lashed to in this design, because it has a channel that helps to hold the beads in place.Check the spacing of the bea ...

    Breathe - Riveted Leather Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsSet link on leather bracelet, and use a sharp pencil, or fine-point non-smudging marker, to make a dot at each spot to punch.Rotate leather hole punch to sma ...

    Inland Northwest Jewelry Resources(Post)

    Find jewelry-making classes, workshops, bead stores, and jewelry repair shops in the Spokane, Washington, area. Links to Pacific Northwest bead societies and art guilds as well. To be listed as a re ...

    Summer Blues Earrings Tutorial(Post)

    Design by Create Your Style team at Swarovski North America.Although these weren't designed with September in mind, the colors are perfect for September birthstone jewelry.Designer TipsAdd one 4mm li ...

    Wire Jewelry 101(Post)

    Jewelry making wire gives you endless choices in creativity! Still, it's easier to get started once you know a few basic tips and terms that will help you determine what type of wire to use for your ...

    Simple Elegance Earrings Tutorial(Post)

    Created by: Summer Melaas   Designer TipsOpen loop at bottom of ear wire. For best way to open and close loops, see Jump Ring Hint in Jewelry Basics 101 (PDF),Slide one connector onto the ear wi ...

    Together Cause Bracelet Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsString a bead cap, pastel pink pearl bead, and another bead cap onto the ball-end head pin and make a large wire-wrapped loop. Make the loop large enough, so t ...

    Patriotic Drops Earrings Tutorial(Post)

    Created by: Amy ScaliseDesigner TipsUse the 1-Step Looper to create 36 (12 of each color) crystal pearl dangles.Cut two 1" pieces of chain and attach approximately 2 dangles per link directly onto th ...

    Impression COPPRclay Bracelet Tutorial(Post)

    Created by: Sondra BarringtonDesigner TipsCreate the COPPRclay links according to the manufacturer's instructions. Like most other metal clays, COPPRclay must be fired in a kiln. COPPRclay shrinks ap ...

    Random Scraps Bib Necklace Tutorial(Post)

    Created by: Valorie Nygaard-PouzarDesigner TipsUse whatever random scraps of chain you have handy, to create this quick and trendy layered chain bib-style necklace.Determine how long you want the lon ...

    TierraCast Monstera Trio Bracelet Tutorial(Post)

    Created by: TierraCastDesigner TipsCut cord into 3 12" pieces. String one button onto each cord, then string 3 hole bars and barrel beads. Position as desired, then lightly crimp barrel beads in plac ...

    99 Luftballons Tutorial(Post)

    ok, so maybe it's just 2 Red Balloons, not 99...Created by: Summer Melaas and Polly Nobbs-LaRue   Designer TipsPunch a 1/16" hole in each blank, directly opposite the existing loop or hole.Clean ...

    Spanish Rose Earrings Tutorial(Post)

    3mm and 4mm gemstone beads have notoriously small holes, so they rarely work with standard-diameter head pins. We highly recommend wrapped loops rather than simple loops, with the thinner-gauge wire ...

    Solje Style Wedding Earring Tutorial(Post)

    Created by: Amy MickelsonDesigner TipsUse jump rings to attach the oval charms to the loops on the filigree connector.Connect the filigree to the loop on the earring post with a 4.5mm jump ring.The f ...

    Falling Snow Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsBlue Shade crystal snowflakes are coated on one side. Check the pendants carefully to hang both crystals in the same direction.Due to the thickness of the crys ...

    Silken Bouquet Bracelet Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsDetermine desired length of finished bracelet.Subtract 1 1/4" from total desired length for connector piece.Keeping toggle clasp parts attached, remove center ...

    Red Kite Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsUse fine tip round nose pliers in order to make loops that match the small loops on the eyepins. For looping instructions, see Jewelry Basics 101 (PDF)As you m ...

    Baroque Beauty Necklace Tutorial(Post)

    Designer TipsUsing one eye pin, slide on one 6mm 5328 bicone bead and make a simple loop. Repeat 30 more times and set aside. New to making jewelry? See Jewelry Basics 101 (PDF).Using an eye pin ...

    Vintner Earrings Tutorial(Post)

    Vintaj findings are designed to be alterable ... here's a fine example!Created by: Rita HutchinsonDesigner TipsSlightly flatten the dome of the Vintaj bead cap. Bend 3 of the "legs" around the sides ...

    Men's Cross Bracelet Tutorial(Post)

    Created by: Valorie Nygaard-PouzarDesigner TipsCut the leather at an angle to assist in fitting two ends through the hole of the cross connector. For a better grip on the end of the leather, consider ...

    Luna Pearl Earrings Tutorial(Post)

    Created by: Summer MelaasDesigner TipsPlace 1 larimar bead, 1 bead cap, and 1 faceted pearl bead on a thin ball-end pin. Wrap it to the tail of the luna moth. New to jewelry-making? See Jewelry Basic ...

    Hexed Wire Bracelet - Tutorial(Post)

    Learn a simple and sparkling way to make bangle bracelets with hex wire. No soldering or wire wrapping required!Created by: Rita HutchinsonDesigner TipsUnroll and straighten enough wire for all brace ...

    Aquamarine Ocean Earrings Tutorial(Post)

    Created by: Sondra Barrington Designer TipsKeep gold-filled and gold-plated findings separate, and mark your supplies well!Use chain-nose pliers to turn the loop on ear wire 90-degrees so it fac ...

    Egyptian Sun Earring Tutorial(Post)

    Learn how to make earrings that shine like the sun, with beautiful Swarovski crystal scarab beads and crystal Sahara suns!Created by: Summer MelaasDesigner Tips Gold-fill items keep their shine for a ...

    Sonya Snow Skater Necklace Tutorial(Post)

    Created by: Amy Mickelson   Designer TipsCut the metal sheet to the desired size. File the edges smooth and punch holes in corners and on the bottom. Sand the surfaces and clean.Place inked rubb ...

    Sagittarius Leather Bracelet(Post)

    Created by: Sondra Barrington Designer TipsCut leather flush after measuring desired length. Use a dab of glue inside one cord end. Insert leather into the cord end and gently pinch the cord end ...

    Spanish-English Jewelry Glossary(Post)

    Glosario español-inglés de términos relacionados a la joyería-bisuteríaSpanish-English    |    English-Spanish Many of us sell to, or buy from, Spanish-speaking countries and peop ...

    Aqua Love Necklace Tutorial(Post)

    Created by: Cindy MorrisDesigner TipsString necklace and finish ends following directions in Beading Cable How-To Sheet below. Use Wire Guardians for a professional finish at the ends of yo ...

    Namaste Chakra Choker / Double Wrap Bracelet Tutorial(Post)

    Created by: Michelle HorningDesigner TipsFor step-by-step instructions on how to macramé a bracelet (or choker), see our blog article: How to Macrame a Hemp Bracelet.A choker will usually fit as a do ...

    Tassel and Sparkle - Simple Charm Bracelet Tutorial(Post)

    Chain bracelets adorned with a simple charm continue to be popular. You can customize this design by using a different colored Swarovski rivoli stone, different styles of chain, or tassels made of di ...

    Geometric Chevron Earrings Tutorial(Post)

    These geometric, simplistic, edgy metallic long chain earrings feature double spike Swarovski crystals! The attention-grabbing, lightweight earrings look like a million bucks but, they are actually v ...

    Hibiscus Flower Earrings(Post)

    Created by: PRESTIGE CrystalSuggested Supplies1 #34-962 Argentium Silver French Hook Earring Wires, Plain (pair)1 #37-722-3 Silver Plated Eye Pin, 2", Standard (Pack)2 #49-947-11-WB TierraCast Interm ...

    September Sky Earrings Tutorial(Post)

    Sapphire and sterling silver are a perfect combination. This September birthstone pairing features mini-sized Swarovski crystal briolette pendants, small sterling-silver crescent-moon connector charm ...

    Fade To Black Skull Necklace Tutorial(Post)

    Created by: Summer Melaas and Sondra BarringtonDesigner TipsFile the drop loops, to give the gluing surface more "tooth". See "Gluing to Metal" Technique Sheet below for additional gluing tips.Mix 2- ...

    5 Minute Rings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsCut a 20-gauge or 24-gauge 0.25" (wide) strip of copper, brass or sterling sheet approximately 2.75" long.Smooth and straighten with a nylon hammer.Optional: ...

    Chasing the Golden Moon Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCut 2 lengths of wire, each about 30" long. You want enough to lash all the crystals, but not so much that the wire is in the way.Anchor 26-gauge wire to the h ...

    Illuminating Lotus Earrings Tutorial(Post)

    Created by: Veronica GreenwoodDesigner TipsThoroughly clean your blank with Penny Brite. See our enameling blog article for tips, precautions and basic instructions for preparing the piece for enamel ...

    Enameled Hidden Heart Tutorial(Post)

    Created by: Mollie ValenteMake your Enamel DiskUse the dapping set to dome the copper blank.(See Rings & Things blog post: How to Dap and Dome Metal Jewelry.)Fire the concave (back side) of the c ...

    Dzi Fishing Hook Necklace Tutorial(Post)

    Created by: Megan Holden Designer TipsUse beading board or beading mat to arrange beads in pattern as shown in picture.String 10 seed beads onto a 20"" piece of beading cable and then building u ...

    Mehandi Coil Bracelet Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsUse shears to cut flat wire. Texture as desired with texturing hammer or metal stamps.Create coil by wrapping at an angle around large barrel of bail making pl ...

    Rings & Things Jewelry Blog(Page)

    Welcome to the Rings-Things blog! We are a world-leading supplier of jewelry-making supplies, offering top-quality products and services to help jewelry makers create beautiful, unique pieces. Whethe ...

Products (4)

Filters
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  •  This filigree is stamped and then plated. It is lightweight, yet durable, and excellent for earrings and pendants.Many filigrees also work well as connectors and links. Most stamped charms are one-sided, thin, and either flat or slightly domed. Size given is height x width and includes loop. Most loops are 0.8-1.2mm (inner diameter).  See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.  This filigree is stamped and then plated. It is lightweight, yet durable, and excellent for earrings and pendants.Many filigrees also work well as connectors and links. Most stamped charms are one-sided, thin, and either flat or slightly domed. Size given is height x width and includes loop. Most loops are 0.8-1.2mm (inner diameter).  See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Antiqued Copper Plated Filigree, Oval (12 Pieces)

    $2.65
    This filigree is stamped and then plated. It is lightweight, yet durable, and excellent for earrings and pendants.Many filigrees also work well as connectors and links. Most stamped charms are...
    Qty in Cart: 0
    Quantity:
    Price:
    $2.65
    Subtotal:
  •  This filigree is stamped and then plated. It is lightweight, yet durable, and excellent for earrings and pendants.Many filigrees also work well as connectors and links. Most stamped charms are one-sided, thin, and either flat or slightly domed. Size given is height x width and includes loop. Most loops are 0.8-1.2mm (inner diameter).  See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.  This filigree is stamped and then plated. It is lightweight, yet durable, and excellent for earrings and pendants.Many filigrees also work well as connectors and links. Most stamped charms are one-sided, thin, and either flat or slightly domed. Size given is height x width and includes loop. Most loops are 0.8-1.2mm (inner diameter).  See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Antiqued Copper Plated Filigree, Cross (12 Pieces)

    $1.25
    This filigree is stamped and then plated. It is lightweight, yet durable, and excellent for earrings and pendants.Many filigrees also work well as connectors and links. Most stamped charms are...
    Qty in Cart: 0
    Quantity:
    Price:
    $1.25
    Subtotal:
  •  This filigree is stamped and then plated. It is lightweight, yet durable, and excellent for earrings and pendants.Many filigrees also work well as connectors and links. Most stamped charms are one-sided, thin, and either flat or slightly domed. Size given is height x width and includes loop. Most loops are 0.8-1.2mm (inner diameter).  See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.  This filigree is stamped and then plated. It is lightweight, yet durable, and excellent for earrings and pendants.Many filigrees also work well as connectors and links. Most stamped charms are one-sided, thin, and either flat or slightly domed. Size given is height x width and includes loop. Most loops are 0.8-1.2mm (inner diameter).  See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Antiqued Copper Plated Filigree, Small, Heart (12 Pieces)

    $1.13
    This filigree is stamped and then plated. It is lightweight, yet durable, and excellent for earrings and pendants.Many filigrees also work well as connectors and links. Most stamped charms are...
    Qty in Cart: 0
    Quantity:
    Price:
    $1.13
    Subtotal:
  • Total: items /

Adding your products to cart