null

612 results for '7 6mm O D 5 5mm I D 18 Gauge Enameled Copper Jump Rings'

Suggestions:

Categories

News & Information (612)

    Jump Ring Hint(Post)

    When you open and close jump rings, twist ends instead of "ovaling" them.This keeps their round shape better, which makes them easier to close neatly and securely.Many people find it easier to grip j ...

    5 Minute Rings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsCut a 20-gauge or 24-gauge 0.25" (wide) strip of copper, brass or sterling sheet approximately 2.75" long.Smooth and straighten with a nylon hammer.Optional: ...

    Go Round-and-Round Enameled-Copper Earrings Tutorial(Post)

    Created by: Mollie Valente Designer TipsMake two enameled copper washers. You can either use the enamel colors of your choice, or the colors listed in the suggested materials. Follow instruction ...

    Jet Scarab Copper Ring Tutorial(Post)

    Depending on the beads you use, this quick and easy unisex design can go from frilly and feminine to macho and masculine.  Created by: Michelle Horning   Designer TipsFor step-by-step instr ...

    Enameled Orchid Eye Tutorial(Post)

    Created by: Mollie Valente Make your Enamel DiskUse the dapping set to dome the copper blank. (See Rings & Things blog post: How to Dap and Dome Metal Jewelry.)Fire the concave (back side) o ...

    Dark Skies Enameled Pendant Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsUse dapping block to shape blank.After dapping, punch 1/16" hole using the smaller (silver) side of a EuroTool "helicopter" punch.Clean blank with penny brite ...

    Copper Sands Earrings Tutorial(Post)

    Created by: Tiffany White Designer TipsOne meter of this chain will make approximately 9-10 pairs of earrings!Place all the crystals onto the head pins and secure with wrapped loops. (New to jew ...

    Enameled Hidden Heart Tutorial(Post)

    Created by: Mollie ValenteMake your Enamel DiskUse the dapping set to dome the copper blank.(See Rings & Things blog post: How to Dap and Dome Metal Jewelry.)Fire the concave (back side) of the c ...

    Enameled Yellow Submarine Tutorial(Post)

    2018 was the 50th Anniversary of the Beatles' Yellow Submarine! Create your own yellow submarine using bright opaque vitreous (glass) enamels on copper sheet.  Created by: Polly Nobbs-LaRue &nbs ...

    An Ode to Ojo Earrings Tutorial(Post)

    Created by: Lindsey GreenDesigner TipsBrushing steel wool lightly over the copper blanks gives them a nice shine and textured look.Free Technique Sheets & How-TosBasic Jewelry-Making Technique Sh ...

    Red Bird Enameled Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsPosition and emboss pattern on blanks with the Big Shot Jewelry Studio and embossing die. (See Big Shot Embossing blog article)Counter-enamel the blank (fire t ...

    Geared Ring Tutorial(Post)

     Created by: Polly Nobbs-LaRue Designer TipsCut a strip of 20-gauge sheet 2.75" long. Smooth and straighten with a nylon hammer.Optional: Texture or stamp (see "How to Make a Metal-Stamped ...

    Delightfully Dotty Enameled Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCut copper sheet to size or use a premade copper blank. If you have cut your own blank, punch hole in appropriate location and file edges to remove roughness.C ...

    Aqua Love Necklace Tutorial(Post)

    Created by: Cindy MorrisDesigner TipsString necklace and finish ends following directions in Beading Cable How-To Sheet below. Use Wire Guardians for a professional finish at the ends of yo ...

    Chainmaille-Style Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsThis project has step-by-step illustrated instructions in our blog: How To Make Chainmaille-Style EarringsSuggested Supplies1 ounce (use 8 pieces) #37-178-1 Whi ...

    Dumortierite and Copper Coin Necklace Tutorial(Post)

    Created by: Dee MuellerDesigner TipsCreate bead connectors with the 8mm rondelles and 14mm faceted round beads.Cut eight 1" pieces of chain. With jump rings attach two pieces of chain to each of six ...

    Captured Aventurine Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Coil the wire around a 14- ...

    Unfurled Copper and Oval Gemstone Necklace Tutorial(Post)

    Created by: Cindy MorrisDesigner TipsSince the gemstones are fairly heavy, use two crimp beads for extra security. Flatten crimps with flat-nose pliers.Use two jump rings for the "S" hook to connect ...

    Ring Around the Rosies Earring Tutorial(Post)

    The TierraCast Dulce Vida rings are reversible, with a different design on each side. If you wish the earrings to match, face the rings in the same direction during assembly.Created by: Rita Hutchins ...

    Double Wrap Hammered Rings Tutorial(Post)

    Depending on the beads you use, this quick and easy unisex design can go from frilly and feminine to macho and masculine.Created by: Michelle HorningDesigner TipsFor step-by-step instructions, see th ...

    Go Fly A Kite Enameled Earrings Tutorial(Post)

    Created by: Summer Melaas Designer TipsCarefully mark spots for holes, and use smaller end of EuroTool "helicopter" punch to add holes to corners of copper blanks.Clean the blank with Penny Brit ...

    Swirly Hammered Wire Rings Tutorial(Post)

    Created by: Michelle HorningDesigner TipsSee Rustic Wire Ring blog article for illustrated step-by-step instructions for making this style of ring.Hide the cut ends of the finer gauge of wire, on the ...

    Astral Love Resin Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsSee instruction page for making no-solder bezels.Cut paper to match bezel wire shape.Seal paper and adhere to inside of bezel.Mix a small batch of resin and po ...

    Boho Barbie Earrings Tutorial(Post)

    Created by: Laurel NewnhamDesigner TipsCut wire into two 16" lengths, one for each earring. Trim excess as needed.Hold wire tightly to create loops that are closer together.Experiment with the positi ...

    Sun Tea Enameled Pendant Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsClean the blank with Penny Brite per package instructions. Rinse thoroughly and avoid touching further.Spray klyr fire onto blank, and sift on a base coat of w ...

    Fashion and Function Pin Cushion Ring Tutorial(Post)

    Created by: Amy Mickelson Designer TipsCreate a cardboard template 2.5 times the diameter of the bezel (approximately 2.25" for this ring).Using a doubled 36" piece of sewing thread, knotted at ...

    Sparkle Motion Gypsy Ring Tutorial(Post)

    Created by: Laurel NewnhamWe no longer carry the 3-loop ring blank in silver plate, but we do still have some in gold plate, so we've linked the parts for a gold version of this ring as well as silve ...

    Lady-Leg Etched Earrings Tutorial(Post)

    These fun etched copper earrings were cut out with shears (a jeweler's saw would also work great) and then the resist was hand-drawn with Sharpie, in the patterns of toes and thigh-high stockings.Cre ...

    Gianni's Garden Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsMeasure, mark and punch the hanging holes: 3 holes spaced to match the loops of the triangle, and one hole on the bottom.Use a rubber stamp of your choice and t ...

    Take Flight Bracelet Tutorial(Post)

    Created by: Bridget AustinDesigner TipsUse a small amount of E-6000 adhesive to glue one cord end onto the cording.Using a head pin, slide on one spacer bead, an apatite pebble bead and one more spac ...

    Bowl of Peaches Earrings - Tutorial(Post)

    Learn to make sweet earrings with a dapped set of disks in sterling and copper. A tumbler REALLY gets these domed disks shiny! They are reflecting so much light back, that the Rose Peach crystals loo ...

    GO TEAM! Seahawks Colors Key Ring(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsAdd a jump ring to the football charm. For best way to open and close loops, see Jump Ring Hint in Jewelry Basics 101 (PDF)Slide the team color charms and th ...

    Titanium Octagon Key Ring Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsThese flat-wire octagonal titanium key rings have a nice look and feel, and the octagon Swarovski Strass crystal continues the geometry. (If you it's crazy t ...

    Simple Leather Leaf Bracelet(Post)

    Created by: Guest Designer Deb FlorosSuggested Supplies 1 #61-130-05-01 Greek Leather Cord, 1.5mm, 5 Meter - Natural (Each)2 #F1CC-6RNR Nunn Design Antique Copper-Plated Pewter 27mm Metal Tube Bead1 ...

    Easy as Pie Napkin Ring Tutorial(Post)

    TierraCast's Wire Hoops aren't just for earrings and charm-holder pendants -- they're also a great size for napkin rings! Create autumn-themed napkin holders with TierraCast's limited-edition pumpkin ...

    99 Luftballons Tutorial(Post)

    ok, so maybe it's just 2 Red Balloons, not 99...Created by: Summer Melaas and Polly Nobbs-LaRue   Designer TipsPunch a 1/16" hole in each blank, directly opposite the existing loop or hole.Clean ...

    Arrow - Etched Copper Bracelet Tutorial(Post)

    Created by: Summer MelaasDesigner TipsOptional: Punch a hole in the corner of the blank, following instructions in hole-punch below. After completing bracelet, dangle a charm or beaded dangle of your ...

    Leather Petal Earrings Tutorial(Post)

    You may have seen some fun leather earrings cut out in the shape of a petal. Why not take it a step further and add some extra pizazz! Just adding some chain and a couple of crystals gives them a lit ...

    Wickedly Simple Wire Wrapped Ring Tutorial(Post)

    Created by: Michelle HorningDesigner TipsFor step-by-step instructions -- with detailed photographs -- for making wickedly simple wire-wrapped rings with beads and 22-gauge wire, see our tutorial at ...

    Feathered Fabulous Dangly Earrings(Post)

    Created by: Guest Designer Deb FlorosSuggested Supplies1 #44-153-9 17x25mm Gunmetal Triangle Filigree (12 Pieces)6 #44-940-81-GM TierraCast Black Gunmetal Plated Small Feather Charm (Each)1 #34-061-1 ...

    Twisted, Not Tangled, Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsThis 24.5"" necklace uses 26 twisty bar connectors. Adjust the finished length of the piece by adding or subtracting connectors.Connect all components together ...

    Fit for a Queen Ring Tutorial(Post)

    This simple project features crystal rivoli stones and 1-time adjustable ring blanks with a bezel setting. Created by: Amy Mickelson Steps to Make These RingsWhile most colors of Swarovski ...

    Frida's Hands Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsString the following beads onto a eye pin: 1 round corrugated-metal bead, 2 rubber wire keepers (these work as positioning beads for the large-hole Mirage bead) ...

    Purple Pillow Ring Tutorial(Post)

    Created by: Rita Hutchinson  Designer TipsUse the ring as a template to cut the image or decorative paper to the correct size.Seal front and back of the image with a waterproof barrier before ap ...

    Southwest Chandelier Earrings Tutorial(Post)

    Created by: Rita Hutchinson. Designer TipsWhen you trim the eye pins on the 3 bead sections, retain two of the pieces to use for the shorter 2 bead section instead of using another whole eye pin.Open ...

    Briolette and Vine Earrings Tutorial(Post)

    Created by: Cindy MorrisDesigner TipsAdd a bead cap, 6mm aventurine gemstone bead, and another bead cap to the eye pin, and make a simple loop. New to jewelry-making? See Basic Jewelry-Making Techniq ...

    Red Light / Green Light Enamel Earrings(Post)

    Your Choice: They're balloons, streetlights or lollipops!  Created by: Summer Melaas and Polly Nobbs-LaRue   Designer TipsPunch a 1/16" hole in each blank, directly opposite the existing lo ...

    4th of July Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsCenter a stone in a setting and gently squeeze prongs in (with your fingers or pliers) working from opposite sides to keep the stone centered. Once the prong ...

    Candara Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRue   Designer Tips  Unspool approximately 26" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Use ring-be ...

    Blue Halo Earrings Tutorial(Post)

    Created by: Veronica GreenwoodDesigner TipsPlace the crystal in the bezel setting and using the nylon jaw flat pliers gently fold the prongs down over the crystal.Using the 6.5mm jump ring attach the ...

    The North Star Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsCreate a bail using a 5/16" x 3" piece of 24-gauge copper sheet: Cut, file, stamp, punch and ream the holes a bit larger. Use bail-making pliers to bend the sta ...

    Golden Halos Earrings Tutorial(Post)

    Due to the popularity of 10mm cushion square settings, we've included links to alternate styles below in case the primary setting used in the Golden Halos earrings is temporarily unavailable.  C ...

    La Terre Threader Earrings Tutorial(Post)

    Created by: Summer Melaas Designer TipsOpen a jump ring.New to jewelry-making? See Basic Jewelry-Making Technique Sheet (PDF) for most secure way to open and close jump rings.Add an opal charm to the ...

    A Ring A Day...(Post)

    A ring a day keeps the doctor away: Chase the winter blues away with this trio of tropical colored rings!Designer TipsUsing the ring finding, place one fancy stone inside setting. Using nylon-jaw pli ...

    Sonya Snow Skater Necklace Tutorial(Post)

    Created by: Amy Mickelson   Designer TipsCut the metal sheet to the desired size. File the edges smooth and punch holes in corners and on the bottom. Sand the surfaces and clean.Place inked rubb ...

    Tamed Urchin Ring Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCenter the stone in the ring setting and gently squeeze in prongs (with your hands or pliers) working from opposite sides to keep the stone centered. Once the ...

    Peaceful Thoughts Lotus Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner Tips - Part 1: Prepare ComponentsDisassemble the metal mesh choker necklace and temporarily set aside the lobster clasp and metal mesh chain. For best way to open a ...

    The Grass is Always Greener Ring Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsCut the glass to fit the bezel and wet sand to smooth the edges.Clean the glass and ring with rubbing alcohol and glue with two-part epoxy.Place the ring on a l ...

    Together Cause Bracelet Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsString a bead cap, pastel pink pearl bead, and another bead cap onto the ball-end head pin and make a large wire-wrapped loop. Make the loop large enough, so t ...

    Mardi Gras Earrings Tutorial(Post)

    Created by: Tiffany WhiteDesigner TipsPlace one bead (glass, crystal or brass), on each headpin and secure with wrapped loops.Arrange the dangles onto the jump rings. Place two brass beads on first j ...

    Tuli Tribal Necklace Tutorial(Post)

    Created by: Joe HentgesDesigner TipsThe hole size for these handmade pendants can be variable.Use a drill to enlarge the hole to accommodate a 13-gauge jump ring.Darken the bone inside the enlarged h ...

    Geometric Chevron Earrings Tutorial(Post)

    These geometric, simplistic, edgy metallic long chain earrings feature double spike Swarovski crystals! The attention-grabbing, lightweight earrings look like a million bucks but, they are actually v ...

    Threads of September - Earrings Tutorial(Post)

    Channel-set Cubic Zirconia charms make it easy to create elegant linear jewelry. However, most colors and sizes (other than basic diamond clear) are out of production... get them while you can!Create ...

    Tangerine Ring Tutorial(Post)

    Created by: Veronica GreenwoodDesigner TipsPlace the 12mm rivoli in the bezel setting.Using the nylon-jaw pliers, gently push the prongs down over the crystal, starting with the top left prong, next ...

    Bees and Blossoms Bangle Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRue   Designer TipsOne of the things I love about this bangle bracelet, is that it's extra small, so fits me perfectly. However, that means it doesn't fit many other ad ...

    Planet Earth Earrings Tutorial(Post)

    Although we no longer have the exact green beads that were used in the original project, we've kept this project in our gallery for 2 reasons: We love Earth Day, and we also think this is a fun atypi ...

    Rainbow Rider Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsUse a jump ring to add the the sterling unicorn charm to the bottom hole of the 12mm crystal Rainbow Dark drop. For best way to open and close loops, see Jump ...

    Metal Etching 101(Post)

    Etching is a method of using chemicals to cut a design or pattern into a metal surface. Etching your own designs into metal is easier than it may sound, and it can be a fun and rewarding way to make ...

    Random Scraps Bib Necklace Tutorial(Post)

    Created by: Valorie Nygaard-PouzarDesigner TipsUse whatever random scraps of chain you have handy, to create this quick and trendy layered chain bib-style necklace.Determine how long you want the lon ...

    Stars and Stripes Earrings Tutorial(Post)

    Created by: Kayla HeflingDesigner TipsAttach the French clip to the eye pin. See Basic Jewelry-Making Technique Sheet (PDF) for best way to open and close loops.Add bicones and briolette crystal to t ...

    Have It Your Way | Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRue   I couldn't decide whether I liked the longer earrings, or the shorter (layered) design - so I went with both! The shorter design would also be great as a pendant ...

    Pawrific Enamel Necklace Tutorial(Post)

    Created by: Summer MelaasDesigner TipsPunch a hole in the top corners of your copper blank. File any sharp bits.Clean your blank very well with warm water and Penny Brite.Cut your 22 ga bare copper w ...

    Hydrangea Blossom Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsTwist a jump ring to open it extra wide.Loop the jump ring around a single pearl in the pearl ball bead.Attach the loop of a French hook ear wire to the jump ri ...

    Sweeter Than Honey Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsFirst make a chain using 8mm jump rings and large-hole beads:Twist open a jump ring and string it through a large-hole bead and then close the jump ring.Open a ...

    Christmas Cluster Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsWire wrap all the metal, pearl and crystal beads before assembling.For each earring, Rita used 18 - 4mm crystal bicones in mixed reds, greens and whites, 6 - 3 ...

    Northern Copperhead Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Make 6 equal sized coils u ...

    All Seeing COPPRclay® Bracelet Tutorial(Post)

    Created by: Joe HentgesDesigner TipsCreate the COPPRclay centerpiece according to the manufacturer's instructions. Like most other metal clays, COPPRclay must be fired in a kiln. COPPRclay shrinks ap ...

    Pieces of the Sky Cuff Bracelet Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsTwist open a 4mm jump ring, string it through the crystal link hole, and twist securely closed. Repeat with the opposite side of the crystal link. For best way ...

    Holiday Lights Necklace Tutorial(Post)

    This sparkling "Christmas light" project is a fun, festive winter design to create with Swarovski crystal teardrop beads in colors of your choice.Created by: Rings & Things Staff Designer TipsAdd ...

    Mehandi Coil Bracelet Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsUse shears to cut flat wire. Texture as desired with texturing hammer or metal stamps.Create coil by wrapping at an angle around large barrel of bail making pl ...

    Matte Satin Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsStart with plenty of 26-gauge wire, and anchor wire to one side of arc connector. Add 4mm beads and extra lashes between each bead. Finish off the end with add ...

    Cumulus Threader Earrings Tutorial(Post)

    Created by: Mollie Valente Designer TipsTwist a jump ring to open it extra wide.Loop the jump ring around a single pearl in the pearl ball bead.Attach the loop of an ear thread to the jump ring.Twist ...

    Golden Buzzer Charm Tutorial(Post)

    Created by: Janet BoyingtonDesigner TipsThis 10mm charm is perfect for showcasing a 6mm stamped impression.Gold-fill is harder than sterling or pewter, but not as hard as nickel silver.Place your cha ...

    Herbaceous Polymer Ring Tutorial(Post)

    Created by: Jaci Boston Designer Tips Wash your hands thoroughly before handling the clay, since polymer clay tends to pick up any dirt and dander that may be hiding.Use a pasta machine to ...

    Falling Snow Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsBlue Shade crystal snowflakes are coated on one side. Check the pendants carefully to hang both crystals in the same direction.Due to the thickness of the crys ...

    Steel Empire Chain Maille Bracelet Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsThis is a variation of the standard Byzantine weave, called Byzantine with 3 connectors. I wanted to use all stainless steel for this bracelet, but the aspect ...

    Swinging Hearts Earrings Tutorial(Post)

    Created by: Amy Scalise. Design by: Swarovski's Create Your Style Design TeamDesigner TipsThese earrings are inspired by the CREATE YOUR STYLE design: "Mother´s Day Earrings: Swinging Hearts".Cut two ...

    Silver Spray Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsWhen making a large number of beaded dangles, it is quickest to do them assembly line style. Figure out the correct length for the wire, and trim all wires, st ...

    Cave Man Necklace Tutorial(Post)

    Created by: Jaci BostonDesigner TipsCarefully plan the cutting pattern. The shape of these cuts creates decorative prongs or tabs to hold the gemstone slab bead.For this design draw the shape to be c ...

    TierraCast Monstera Trio Bracelet Tutorial(Post)

    Created by: TierraCastDesigner TipsCut cord into 3 12" pieces. String one button onto each cord, then string 3 hole bars and barrel beads. Position as desired, then lightly crimp barrel beads in plac ...

    Victoria - Etched Earrings Tutorial(Post)

    Created by: Summer MelaasDesigner TipsEtch earrings (See etching tutorial below).Place cushion in cushion setting and fold over tabs using nylon-jaw pliers or a burnisher.Attach French hooks to top o ...

    Balancing Act Asymmetrical Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner Tips - Earring 1Attach a tiny heart charm to the end of an eye pin. String on a rose-peach pearl and form a simple loop on the end. Then attach to the the end link ...

    Unpretentious Princess Earrings Tutorial(Post)

    Created by: Janet BoyingtonThe star of the show, is the Princess-cut pendant! These sweet earrings are elegant and petite. Want to make a larger, flashier pair earrings, or use different colors? Clic ...

    BeDazzled Slinky Bracelet Tutorial(Post)

    Created by: Sondra BarringtonDesigner TipsUse 7 coils of anklet size to make this bracelet bangle. You can adjust the size of wire and numbers of coils any way you wish.Do not use your favorite jewel ...

    Simple Rhinestone Bracelet Tutorial(Post)

    Designer TipsGently squeeze the prongs on the rhinestone chain ends to prevent chipping.Attach 5mm jump ring to one end. (See Jewelry-Making Basics for best way to open and close jump rings.)Use smal ...

    Copper & Purple Love - Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner Tips Set link on leather bracelet, and use a sharp pencil, or fine-point non-smudging marker, to make a dot at each spot to punch.Rotate leather hole punch to s ...

    Frippery Soldered Frame Pendant Necklace Tutorial(Post)

    Created by: Cindy MorrisDesigner TipsChoose 2 pieces of glass from the package and clean.NOTE: this design was created with 1.25" square glass, which is no longer available. 1" and 22mm replacements ...

    Scrap Chain Tassel Earring Tutorial(Post)

    Created by: Amy Mickelson   Designer TipsIf you buy spools of chain for various projects, you inevitably end up with scrap pieces. These left overs are too short for necklaces or maybe too fine ...

    Dzi Fishing Hook Necklace Tutorial(Post)

    Created by: Megan Holden Designer TipsUse beading board or beading mat to arrange beads in pattern as shown in picture.String 10 seed beads onto a 20"" piece of beading cable and then building u ...

    Rings & Things Jewelry Blog(Page)

    Welcome to the Rings-Things blog! We are a world-leading supplier of jewelry-making supplies, offering top-quality products and services to help jewelry makers create beautiful, unique pieces. Whethe ...

Products (0)

Filters
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Total: items /

Adding your products to cart