null

628 results for '6 6mm O D 4 5mm I D 18 Gauge Enameled Copper Jump Rings'

Suggestions:

Categories

News & Information (628)

    Jump Ring Hint(Post)

    When you open and close jump rings, twist ends instead of "ovaling" them.This keeps their round shape better, which makes them easier to close neatly and securely.Many people find it easier to grip j ...

    Go Round-and-Round Enameled-Copper Earrings Tutorial(Post)

    Created by: Mollie Valente Designer TipsMake two enameled copper washers. You can either use the enamel colors of your choice, or the colors listed in the suggested materials. Follow instruction ...

    Jet Scarab Copper Ring Tutorial(Post)

    Depending on the beads you use, this quick and easy unisex design can go from frilly and feminine to macho and masculine.  Created by: Michelle Horning   Designer TipsFor step-by-step instr ...

    5 Minute Rings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsCut a 20-gauge or 24-gauge 0.25" (wide) strip of copper, brass or sterling sheet approximately 2.75" long.Smooth and straighten with a nylon hammer.Optional: ...

    Enameled Orchid Eye Tutorial(Post)

    Created by: Mollie Valente Make your Enamel DiskUse the dapping set to dome the copper blank. (See Rings & Things blog post: How to Dap and Dome Metal Jewelry.)Fire the concave (back side) o ...

    Dark Skies Enameled Pendant Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsUse dapping block to shape blank.After dapping, punch 1/16" hole using the smaller (silver) side of a EuroTool "helicopter" punch.Clean blank with penny brite ...

    Enameled Hidden Heart Tutorial(Post)

    Created by: Mollie ValenteMake your Enamel DiskUse the dapping set to dome the copper blank.(See Rings & Things blog post: How to Dap and Dome Metal Jewelry.)Fire the concave (back side) of the c ...

    Double Wrap Hammered Rings Tutorial(Post)

    Depending on the beads you use, this quick and easy unisex design can go from frilly and feminine to macho and masculine.Created by: Michelle HorningDesigner TipsFor step-by-step instructions, see th ...

    Captured Aventurine Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Coil the wire around a 14- ...

    An Ode to Ojo Earrings Tutorial(Post)

    Created by: Lindsey GreenDesigner TipsBrushing steel wool lightly over the copper blanks gives them a nice shine and textured look.Free Technique Sheets & How-TosBasic Jewelry-Making Technique Sh ...

    Enameled Yellow Submarine Tutorial(Post)

    2018 was the 50th Anniversary of the Beatles' Yellow Submarine! Create your own yellow submarine using bright opaque vitreous (glass) enamels on copper sheet.  Created by: Polly Nobbs-LaRue &nbs ...

    Go Fly A Kite Enameled Earrings Tutorial(Post)

    Created by: Summer Melaas Designer TipsCarefully mark spots for holes, and use smaller end of EuroTool "helicopter" punch to add holes to corners of copper blanks.Clean the blank with Penny Brit ...

    Sun Tea Enameled Pendant Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsClean the blank with Penny Brite per package instructions. Rinse thoroughly and avoid touching further.Spray klyr fire onto blank, and sift on a base coat of w ...

    Geared Ring Tutorial(Post)

     Created by: Polly Nobbs-LaRue Designer TipsCut a strip of 20-gauge sheet 2.75" long. Smooth and straighten with a nylon hammer.Optional: Texture or stamp (see "How to Make a Metal-Stamped ...

    Copper Sands Earrings Tutorial(Post)

    Created by: Tiffany White Designer TipsOne meter of this chain will make approximately 9-10 pairs of earrings!Place all the crystals onto the head pins and secure with wrapped loops. (New to jew ...

    Chainmaille-Style Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsThis project has step-by-step illustrated instructions in our blog: How To Make Chainmaille-Style EarringsSuggested Supplies1 ounce (use 8 pieces) #37-178-1 Whi ...

    Delightfully Dotty Enameled Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCut copper sheet to size or use a premade copper blank. If you have cut your own blank, punch hole in appropriate location and file edges to remove roughness.C ...

    Arrow - Etched Copper Bracelet Tutorial(Post)

    Created by: Summer MelaasDesigner TipsOptional: Punch a hole in the corner of the blank, following instructions in hole-punch below. After completing bracelet, dangle a charm or beaded dangle of your ...

    Ring Around the Rosies Earring Tutorial(Post)

    The TierraCast Dulce Vida rings are reversible, with a different design on each side. If you wish the earrings to match, face the rings in the same direction during assembly.Created by: Rita Hutchins ...

    Boho Barbie Earrings Tutorial(Post)

    Created by: Laurel NewnhamDesigner TipsCut wire into two 16" lengths, one for each earring. Trim excess as needed.Hold wire tightly to create loops that are closer together.Experiment with the positi ...

    Aqua Love Necklace Tutorial(Post)

    Created by: Cindy MorrisDesigner TipsString necklace and finish ends following directions in Beading Cable How-To Sheet below. Use Wire Guardians for a professional finish at the ends of yo ...

    Fashion and Function Pin Cushion Ring Tutorial(Post)

    Created by: Amy Mickelson Designer TipsCreate a cardboard template 2.5 times the diameter of the bezel (approximately 2.25" for this ring).Using a doubled 36" piece of sewing thread, knotted at ...

    Bowl of Peaches Earrings - Tutorial(Post)

    Learn to make sweet earrings with a dapped set of disks in sterling and copper. A tumbler REALLY gets these domed disks shiny! They are reflecting so much light back, that the Rose Peach crystals loo ...

    Red Bird Enameled Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsPosition and emboss pattern on blanks with the Big Shot Jewelry Studio and embossing die. (See Big Shot Embossing blog article)Counter-enamel the blank (fire t ...

    Dumortierite and Copper Coin Necklace Tutorial(Post)

    Created by: Dee MuellerDesigner TipsCreate bead connectors with the 8mm rondelles and 14mm faceted round beads.Cut eight 1" pieces of chain. With jump rings attach two pieces of chain to each of six ...

    Lady-Leg Etched Earrings Tutorial(Post)

    These fun etched copper earrings were cut out with shears (a jeweler's saw would also work great) and then the resist was hand-drawn with Sharpie, in the patterns of toes and thigh-high stockings.Cre ...

    Unfurled Copper and Oval Gemstone Necklace Tutorial(Post)

    Created by: Cindy MorrisDesigner TipsSince the gemstones are fairly heavy, use two crimp beads for extra security. Flatten crimps with flat-nose pliers.Use two jump rings for the "S" hook to connect ...

    Swirly Hammered Wire Rings Tutorial(Post)

    Created by: Michelle HorningDesigner TipsSee Rustic Wire Ring blog article for illustrated step-by-step instructions for making this style of ring.Hide the cut ends of the finer gauge of wire, on the ...

    Astral Love Resin Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsSee instruction page for making no-solder bezels.Cut paper to match bezel wire shape.Seal paper and adhere to inside of bezel.Mix a small batch of resin and po ...

    Candara Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRue   Designer Tips  Unspool approximately 26" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Use ring-be ...

    99 Luftballons Tutorial(Post)

    ok, so maybe it's just 2 Red Balloons, not 99...Created by: Summer Melaas and Polly Nobbs-LaRue   Designer TipsPunch a 1/16" hole in each blank, directly opposite the existing loop or hole.Clean ...

    Take Flight Bracelet Tutorial(Post)

    Created by: Bridget AustinDesigner TipsUse a small amount of E-6000 adhesive to glue one cord end onto the cording.Using a head pin, slide on one spacer bead, an apatite pebble bead and one more spac ...

    Leather Petal Earrings Tutorial(Post)

    You may have seen some fun leather earrings cut out in the shape of a petal. Why not take it a step further and add some extra pizazz! Just adding some chain and a couple of crystals gives them a lit ...

    Wickedly Simple Wire Wrapped Ring Tutorial(Post)

    Created by: Michelle HorningDesigner TipsFor step-by-step instructions -- with detailed photographs -- for making wickedly simple wire-wrapped rings with beads and 22-gauge wire, see our tutorial at ...

    Easy as Pie Napkin Ring Tutorial(Post)

    TierraCast's Wire Hoops aren't just for earrings and charm-holder pendants -- they're also a great size for napkin rings! Create autumn-themed napkin holders with TierraCast's limited-edition pumpkin ...

    Sparkle Motion Gypsy Ring Tutorial(Post)

    Created by: Laurel NewnhamWe no longer carry the 3-loop ring blank in silver plate, but we do still have some in gold plate, so we've linked the parts for a gold version of this ring as well as silve ...

    Feathered Fabulous Dangly Earrings(Post)

    Created by: Guest Designer Deb FlorosSuggested Supplies1 #44-153-9 17x25mm Gunmetal Triangle Filigree (12 Pieces)6 #44-940-81-GM TierraCast Black Gunmetal Plated Small Feather Charm (Each)1 #34-061-1 ...

    Titanium Octagon Key Ring Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsThese flat-wire octagonal titanium key rings have a nice look and feel, and the octagon Swarovski Strass crystal continues the geometry. (If you it's crazy t ...

    GO TEAM! Seahawks Colors Key Ring(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsAdd a jump ring to the football charm. For best way to open and close loops, see Jump Ring Hint in Jewelry Basics 101 (PDF)Slide the team color charms and th ...

    Fit for a Queen Ring Tutorial(Post)

    This simple project features crystal rivoli stones and 1-time adjustable ring blanks with a bezel setting. Created by: Amy Mickelson Steps to Make These RingsWhile most colors of Swarovski ...

    The North Star Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsCreate a bail using a 5/16" x 3" piece of 24-gauge copper sheet: Cut, file, stamp, punch and ream the holes a bit larger. Use bail-making pliers to bend the sta ...

    Tangerine Ring Tutorial(Post)

    Created by: Veronica GreenwoodDesigner TipsPlace the 12mm rivoli in the bezel setting.Using the nylon-jaw pliers, gently push the prongs down over the crystal, starting with the top left prong, next ...

    A Ring A Day...(Post)

    A ring a day keeps the doctor away: Chase the winter blues away with this trio of tropical colored rings!Designer TipsUsing the ring finding, place one fancy stone inside setting. Using nylon-jaw pli ...

    Red Light / Green Light Enamel Earrings(Post)

    Your Choice: They're balloons, streetlights or lollipops!  Created by: Summer Melaas and Polly Nobbs-LaRue   Designer TipsPunch a 1/16" hole in each blank, directly opposite the existing lo ...

    4th of July Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsCenter a stone in a setting and gently squeeze prongs in (with your fingers or pliers) working from opposite sides to keep the stone centered. Once the prong ...

    Have It Your Way | Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRue   I couldn't decide whether I liked the longer earrings, or the shorter (layered) design - so I went with both! The shorter design would also be great as a pendant ...

    Peaceful Thoughts Lotus Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner Tips - Part 1: Prepare ComponentsDisassemble the metal mesh choker necklace and temporarily set aside the lobster clasp and metal mesh chain. For best way to open a ...

    Purple Pillow Ring Tutorial(Post)

    Created by: Rita Hutchinson  Designer TipsUse the ring as a template to cut the image or decorative paper to the correct size.Seal front and back of the image with a waterproof barrier before ap ...

    Sunny Day Skull Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCreate skull dangles and outer-circle Size 6 E bead dangles with headpins, corrugated beads, and seed beads.For step-by-step direction on making head pin loops ...

    Blue Halo Earrings Tutorial(Post)

    Created by: Veronica GreenwoodDesigner TipsPlace the crystal in the bezel setting and using the nylon jaw flat pliers gently fold the prongs down over the crystal.Using the 6.5mm jump ring attach the ...

    Gianni's Garden Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsMeasure, mark and punch the hanging holes: 3 holes spaced to match the loops of the triangle, and one hole on the bottom.Use a rubber stamp of your choice and t ...

    Twisted, Not Tangled, Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsThis 24.5"" necklace uses 26 twisty bar connectors. Adjust the finished length of the piece by adding or subtracting connectors.Connect all components together ...

    Golden Halos Earrings Tutorial(Post)

    Due to the popularity of 10mm cushion square settings, we've included links to alternate styles below in case the primary setting used in the Golden Halos earrings is temporarily unavailable.  C ...

    Mardi Gras Earrings Tutorial(Post)

    Created by: Tiffany WhiteDesigner TipsPlace one bead (glass, crystal or brass), on each headpin and secure with wrapped loops.Arrange the dangles onto the jump rings. Place two brass beads on first j ...

    Bermuda Crescent Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCut 4 lengths of chain, each 4 links long.Use 4.5mm jump rings to attach chain to the top holes of the crescent link. For best way to open and close loops, see ...

    Christmas Cluster Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsWire wrap all the metal, pearl and crystal beads before assembling.For each earring, Rita used 18 - 4mm crystal bicones in mixed reds, greens and whites, 6 - 3 ...

    Briolette and Vine Earrings Tutorial(Post)

    Created by: Cindy MorrisDesigner TipsAdd a bead cap, 6mm aventurine gemstone bead, and another bead cap to the eye pin, and make a simple loop. New to jewelry-making? See Basic Jewelry-Making Techniq ...

    Northern Copperhead Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Make 6 equal sized coils u ...

    Mehandi Coil Bracelet Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsUse shears to cut flat wire. Texture as desired with texturing hammer or metal stamps.Create coil by wrapping at an angle around large barrel of bail making pl ...

    Copper & Purple Love - Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner Tips Set link on leather bracelet, and use a sharp pencil, or fine-point non-smudging marker, to make a dot at each spot to punch.Rotate leather hole punch to s ...

    Sonya Snow Skater Necklace Tutorial(Post)

    Created by: Amy Mickelson   Designer TipsCut the metal sheet to the desired size. File the edges smooth and punch holes in corners and on the bottom. Sand the surfaces and clean.Place inked rubb ...

    The Grass is Always Greener Ring Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsCut the glass to fit the bezel and wet sand to smooth the edges.Clean the glass and ring with rubbing alcohol and glue with two-part epoxy.Place the ring on a l ...

    Sweeter Than Honey Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsFirst make a chain using 8mm jump rings and large-hole beads:Twist open a jump ring and string it through a large-hole bead and then close the jump ring.Open a ...

    Simple Leather Leaf Bracelet(Post)

    Created by: Guest Designer Deb FlorosSuggested Supplies 1 #61-130-05-01 Greek Leather Cord, 1.5mm, 5 Meter - Natural (Each)2 #F1CC-6RNR Nunn Design Antique Copper-Plated Pewter 27mm Metal Tube Bead1 ...

    DIY Adjustable Bangle Bracelet Tutorial(Post)

    This style of bracelet is a great one-size-fits-all design. OK, so technically the same bracelet size won't fit both a petite 6-year-old and a Samoan warrior, but odds are that you can determine one ...

    Kilauea Nights Earring Tutorial(Post)

    This stunning earrings project combines Swarovski queen baguette crystals with cascades of wrapped loop dangles and stylish Nina Designs earring hooks. The bicone bead dangles highlight the tones tha ...

    Scrap Chain Tassel Earring Tutorial(Post)

    Created by: Amy Mickelson   Designer TipsIf you buy spools of chain for various projects, you inevitably end up with scrap pieces. These left overs are too short for necklaces or maybe too fine ...

    Cave Man Necklace Tutorial(Post)

    Created by: Jaci BostonDesigner TipsCarefully plan the cutting pattern. The shape of these cuts creates decorative prongs or tabs to hold the gemstone slab bead.For this design draw the shape to be c ...

    BeDazzled Slinky Bracelet Tutorial(Post)

    Created by: Sondra BarringtonDesigner TipsUse 7 coils of anklet size to make this bracelet bangle. You can adjust the size of wire and numbers of coils any way you wish.Do not use your favorite jewel ...

    Steel Empire Chain Maille Bracelet Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsThis is a variation of the standard Byzantine weave, called Byzantine with 3 connectors. I wanted to use all stainless steel for this bracelet, but the aspect ...

    Avocado Dorado Cuff Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsSolder Brass Ninja Star* to Copper Disk:If the copper or brass shapes are bent, straighten them with a steel block and nylon or rawhide mallet. (Solder doesn ...

    Herbaceous Polymer Ring Tutorial(Post)

    Created by: Jaci Boston Designer Tips Wash your hands thoroughly before handling the clay, since polymer clay tends to pick up any dirt and dander that may be hiding.Use a pasta machine to ...

    Passage To India - Coin Earrings Tutorial(Post)

    These verdigris coin earrings are a beautiful combination of metal and gemstones, with a hint of sparkle. This beginner project requires only a few basic jewelry-making tools and can be completed qui ...

    Green and Gold Bracelet Tutorial(Post)

    Created by: The R&T Showroom TeamDesigner TipsPlace crystal stones in bezels, and carefully bend prongs down using fingers and/or nylon-jaw pliers.Add a large round jump ring to the football char ...

    Fat Tuesday Bracelet Tutorial(Post)

    Created by: Tiffany White Designer Tips Assemble all glass, brass and pearl beads on head pins. (Use round glass beads or Swarovski crystal beads, or both.) Secure with wrapped loops.Attach ...

    Frida's Hands Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsString the following beads onto a eye pin: 1 round corrugated-metal bead, 2 rubber wire keepers (these work as positioning beads for the large-hole Mirage bead) ...

    Matte Satin Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsStart with plenty of 26-gauge wire, and anchor wire to one side of arc connector. Add 4mm beads and extra lashes between each bead. Finish off the end with add ...

    Tribal Fan Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsDecide which direction to face the (reversible) ethnic fan connectors and charms, and lay out all pieces. Use a medium-large jump ring (approx. 7mm), attach ...

    Interchangeable Bracelet Tutorial(Post)

    All chain and settings used below are in Antique Brass, but Silver Plate and Antique Copper settings are also available!Created by: Bridget AustinDesigner TipsUse chain nose pliers or a burnishing to ...

    Bermuda Triangle Earrings Tutorial(Post)

    No mysteries here, just a simple design with a stunning color effect. Bermuda Blue, with its intense flashes of teal and deep blues, has been one of our favorites from Swarovski since we first added ...

    Tamed Urchin Ring Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCenter the stone in the ring setting and gently squeeze in prongs (with your hands or pliers) working from opposite sides to keep the stone centered. Once the ...

    Metal Etching 101(Post)

    Etching is a method of using chemicals to cut a design or pattern into a metal surface. Etching your own designs into metal is easier than it may sound, and it can be a fun and rewarding way to make ...

    La Terre Threader Earrings Tutorial(Post)

    Created by: Summer Melaas Designer TipsOpen a jump ring.New to jewelry-making? See Basic Jewelry-Making Technique Sheet (PDF) for most secure way to open and close jump rings.Add an opal charm to the ...

    Baroque Beauty Necklace Tutorial(Post)

    Designer TipsUsing one eye pin, slide on one 6mm 5328 bicone bead and make a simple loop. Repeat 30 more times and set aside. New to making jewelry? See Jewelry Basics 101 (PDF).Using an eye pin ...

    All Seeing COPPRclay® Bracelet Tutorial(Post)

    Created by: Joe HentgesDesigner TipsCreate the COPPRclay centerpiece according to the manufacturer's instructions. Like most other metal clays, COPPRclay must be fired in a kiln. COPPRclay shrinks ap ...

    Witchy Necklace Tutorial(Post)

    Created by: Jaci BostonDesigner TipsKeep the saw blade well lubricated to create ease while sawing.To avoid breaking your blades, keep the saw upright, without tilting, while you're sawing.For perfec ...

    Poppy Field Pendant Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsSelect and clean two matching glass pieces.Select an image and cut it to match the glass shape and size.Carefully wrap the glass with copper-foil tape. To creat ...

    Frippery Soldered Frame Pendant Necklace Tutorial(Post)

    Created by: Cindy MorrisDesigner TipsChoose 2 pieces of glass from the package and clean.NOTE: this design was created with 1.25" square glass, which is no longer available. 1" and 22mm replacements ...

    Witchy Earrings Tutorial(Post)

    Created by: Jaci BostonDesigner TipsKeep the saw blade well lubricated to create ease while sawing.To avoid breaking your blades, keep the saw upright, without tilting, while you're sawing.For perfec ...

    Cumulus Threader Earrings Tutorial(Post)

    Created by: Mollie Valente Designer TipsTwist a jump ring to open it extra wide.Loop the jump ring around a single pearl in the pearl ball bead.Attach the loop of an ear thread to the jump ring.Twist ...

    Southwest Chandelier Earrings Tutorial(Post)

    Created by: Rita Hutchinson. Designer TipsWhen you trim the eye pins on the 3 bead sections, retain two of the pieces to use for the shorter 2 bead section instead of using another whole eye pin.Open ...

    Stars and Stripes Earrings Tutorial(Post)

    Created by: Kayla HeflingDesigner TipsAttach the French clip to the eye pin. See Basic Jewelry-Making Technique Sheet (PDF) for best way to open and close loops.Add bicones and briolette crystal to t ...

    Swinging Hearts Earrings Tutorial(Post)

    Created by: Amy Scalise. Design by: Swarovski's Create Your Style Design TeamDesigner TipsThese earrings are inspired by the CREATE YOUR STYLE design: "Mother´s Day Earrings: Swinging Hearts".Cut two ...

    Trisha Earrings Tutorial(Post)

    If you've never set faceted stones before, tube settings are a great way to get started.Created by: Rita HutchinsonDesigner TipsGolden Topaz is November's birthstone, and sparkling 4mm CZs are availa ...

    Fresh Pots Bracelet Tutorial(Post)

    Created by: Jaci BostonDesigner TipsUse silhouettes of multiple teapots and teacups to make this design. No two are alike.Use rubber cement to glue the paper images to the metal.Saw vertically at all ...

    Noble Fir Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsCreate a COPPRclay™ pendant following the manufacturer's guidelines included with the clay and your kiln.Mollie made her own pattern sheet by taking a piece of ...

    Wedding Doves Necklace and Earring Tutorial(Post)

    Created by: Rings & Things StaffDesigner TipsThis symmetrically designed necklace has a finished length of 17". For a different length, adjust the amount of beads, bead caps and stringing cable a ...

    Hydrangea Blossom Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsTwist a jump ring to open it extra wide.Loop the jump ring around a single pearl in the pearl ball bead.Attach the loop of a French hook ear wire to the jump ri ...

    Elegant Brass Drops Tutorial(Post)

    Designer TipsCut the wire into two 1" pieces. Make a simple loop, slide on one 6mm bicone bead, and make a simple loop. For step-by-step instructions on making loops, and the best way to open and sec ...

    Rings & Things Jewelry Blog(Page)

    Welcome to the Rings-Things blog! We are a world-leading supplier of jewelry-making supplies, offering top-quality products and services to help jewelry makers create beautiful, unique pieces. Whethe ...

Products (0)

Filters
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Total: items /

Adding your products to cart

View Cart Continue Shopping

Featured Products

Which Glue is Best? For the most durable bond, we almost always recommend epoxies rather than other types of glue, but it depends on a few factors... Check out the options, plus tips for successful glue bonds, on our Adhesives and Jewelry Glues page. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Which Glue is Best? For the most durable bond, we almost always recommend epoxies rather than other types of glue, but it depends on a few factors... Check out the options, plus tips for successful glue bonds, on our Adhesives and Jewelry Glues page. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Magnet, Round, 18mm (35 Pieces)

$9.67
Which Glue is Best? For the most durable bond, we almost always recommend epoxies rather than other types of glue, but it depends on a few factors... Check out the options, plus tips for successful...
Add to Cart
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help! See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

14kt Gold-Filled Lobster Clasp, 10mm (Each)

$2.64
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!
Add to Cart
Using a steel hammer on steel stamps, can damage (or even shatter!) your metal stamps, and is likely to bounce and give you the dreaded double impression. This is why we recommend always using brass hammers to hit steel stamps. Brass is a softer metal than steel, so don't worry when your brass hammer head gets dented (this is normal). See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

ImpressArt Metal Stamping Hammer, Stubby (Each)

ImpressArt

$20.80
Using a steel hammer on steel stamps, can damage (or even shatter!) your metal stamps, and is likely to bounce and give you the dreaded double impression. This is why we recommend always using brass...
Add to Cart
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

Leather Cuff Bracelet, 1" - Denim (Each)

$4.13
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!
Add to Cart
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help! See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

Leather Wrap Bracelet, 1/2" - Natural (Each)

$7.23
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!
Add to Cart
Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm (inner diameter). To create an antiqued look on raw brass, apply an oxidizing solution. Raw brass is not quite as shiny as most plated finishes. To make your raw brass items shinier, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.If desired, add a sealant or glaze. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm (inner diameter). To create an antiqued look on raw brass, apply an oxidizing solution. Raw brass is not quite as shiny as most plated finishes. To make your raw brass items shinier, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.If desired, add a sealant or glaze. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

22mm Brass Filigree, Wavy Square (12 Pieces)

$1.05
Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm...
Add to Cart
Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm (inner diameter). To create an antiqued look on raw brass, apply an oxidizing solution. Raw brass is not quite as shiny as most plated finishes. To make your raw brass items shinier, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.If desired, add a sealant or glaze. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm (inner diameter). To create an antiqued look on raw brass, apply an oxidizing solution. Raw brass is not quite as shiny as most plated finishes. To make your raw brass items shinier, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.If desired, add a sealant or glaze. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Brass Filigree, Small, Oval, 4 Loops (12 Pieces)

$1.13
Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm...
Add to Cart