• Home
  • /
  • ImpressArt Amethyst/ Silver Plated Crystal Rivet #69-932-06-282

ImpressArt Amethyst/ Silver Plated Crystal Rivet #69-932-06-282

SKU 69-932-06-282
ImpressArt® crystal compression rivets (sometimes called snap rivets). 6mm round head, 3.5mm diameter (just over 1/8") post, 7mm diameter cap. Fits material approx. 3.5mm thick. 5 sets per pack. The rivets fit in a 5/32" diameter hole when riveting metal. For leather, make a 1/8" or smaller hole to ensure the rivet won't pull through. Dress up your designs with these sparkly rivets.
Need more info? See More Details and Related Products below.
Brand: ImpressArt
Country of Origin: Czech Republic
Bin: WH-N-20
Sold by: 5-pack
1 – 9$3.00
10 +$2.40
(0) No Reviews yet
Estimated Restock Date: 7/1/2022 - Pre-order now!
Select Store to check availability.

** Out of Stock **

Sold by: 5-pack

More Details

How to Set Crystal Rivets

1. Gather supplies: rivets, metal blank, leather, rivet setter, rubber mat and 5/32" hole punch (plus a 1/8" hole punch if the leather also needs to be punched).

2. Position the leather and metal components, and mark hole placement on each.

3. Center the mark in the hole on the bottom side of the punch.

4. Create a hole in each blank.

5. Push the rivet through the hole in the leather flower, then through the metal blank.

6. Put the cap on the back.

7. Place on the rubber mat, crystal side down.

8. Position the concave end of the rivet setting over the cap and strike with a hammer firmly until rivet is set.

9. A crystal riveted necklace pendant!

Note: These crystal rivets work well for materials totalling approximately 2-3mm thick.

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Approx. Size

6mm diameter head, 3.5mm diameter post, 7mm diameter cap

Additional Specs

5 per pack


Glass/ Brass


Amethyst/ Silver Plated

Ratings & Reviews

No reviews available

Be the first to Write a Review