For tips, extra details, and related products, click item images or names. Coronavirus Update: We are shipping full speed, and our Spokane Showroom is... (more info)
Metal Etching 101
Etching is a method of using chemicals to cut a design or pattern into a metal surface. Etching your own designs into metal is easier than it may sound, and it can be a fun and rewarding way to make your own jewelry! Learn the basics of how to choose your metals, choose your etchants, create or transfer your images with resists, and complete the etching process. Discover how to make a float boat for suspending your designs in etchant — plus find basic etching safety precautions, design considerations, and free projects. You may also want to shop our
etching chemicals & supplies, including our
exclusive etching tool kit.
Because chemical etching actually cuts into the surface of the metal, you want to make sure your plate or sheet of metal is thick enough to hold an etched design well. We recommend using 22-gauge or thicker metal sheet and pre-cut metal blanks. Options we carry that will work with ferric chloride (see next section) include:
Etchant is the chemical (or mixture of chemicals) that you'll use to cut into unprotected parts of your metal and create the finished etched design. It's important to match your metal with an appropriate etchant, because the same metal will react differently to different chemicals (and vice versa).
Copper, brass and nickel silver can be etched with ferric chloride. To avoid order delays and extra shipping charges, please read and follow the shipping restrictions listed with chemicals such as ferric chloride.
.999 fine silver & .925 sterling silver can be etched using a ferric nitrate solution or nitric acid. Both these etchants are more dangerous to use than ferric chloride.
Aluminum etchants include hydrofluoric acid, Kellers etch, and homemade solutions made with copper sulfate and sodium bisulfate.
Types of Resists
A resist is what you use to protect certain parts of your metal from the etchant. Resists are typically inks (and tapes). You will apply a design or pattern to the metal with your resist. Then, when you dip your metal into the chemical bath, the covered areas will "resist" being eaten away. Those covered areas will be the high points of your design once the etching process is complete.
Different artisans use different resists, and different resists work better with different aesthetic styles and methods — for example using rubber stamps, making a photo transfer, drawing by hand, etc. With practice and experimentation you'll figure out which mediums and methods you prefer, too.
Resists that work on copper, brass, and nickel silver include:
StazOn® & Perfect Medium™ Ink Pads work great to add rubber stamp designs to metal. StazOn Cleaner allows you to removed smudged immpressions and start over till the image comes out to your satisfaction.
Press-n-Peel Transfer Film provides an easy way to create detailed photo etched designs. Use a laser printer or copier to print onto the paper, then transfer the image to metal with an iron.
Sharpie Permanent Markers are a great resist for hand-drawn designs. Just keep in mind that etchants can undercut designs a little. Don't draw with too fine a line, or details could be lost.
Duct Tape works great to cover the back of your metal (unless you want both sides of your metal to be etched), and or to create a frame/border around your design.
Etching Tutorials & Projects
Use our blog post below to take you through the full process of etching a design into metal — including the innovative use of a "float boat" instead of tape to suspend your designs in the etchant! Find more helpful hints in our safety precautions and design considerations. Get inspired with free projects.
DIY Copper Etching Tutorial
Blog Post
Safety Tips for Metal Etching
Blog Post
Design Considerations for Etching Metal
Blog Post
"Pleasant Dream" Etched Barrette
Gallery Project
How to Make an Etched Metal & Leather Bracelet
Blog Post
"Sonya Snow Skater" Etched Necklace
Gallery Project
For an illustrated step-by-step guide that's easy to print, see our Metal Etching 101 PDF.
What's the Difference between Etching & DecoEtch™?
"DecoEtch" is a trademarked name for a type of pattern die used with the BIGkick™ and Big Shot Jewelry Studio machines by Sizzix®. These mini rolling mills are great tools for making embossed designs in metal. Sadly, the machines are no longer in production, and neither are the dies. However, we still have a few of the dies, so if you already have a BIGkick, Big Shot, or compatible machine, get the dies while you can!
DecoEtch™ dies offer finer lines than DecoEmboss™ dies, but the process is still embossing — there are no chemicals involved. Embossing is a great way to create patterns in metal without using chemicals!
