Choker, Steel Cable, 1mm, 20", Unfinished (10 Pieces)

• Magnetic nickel-free clasp is surprisingly strong!
• All chokers are finished with a smooth, clear plastic coating.
• Sleek classic design makes these great for showing off handmade beads and pendants.
• Use Heavy-duty flush cutters to shorten (if desired) before adding beads and gluing end.
• This unfinished style allows you to add beads with a 1mm (or larger) hole before gluing. Beads with a hole up to 2.7mm will remain securely on the choker once the clasp is glued.

How to finish these Cables...

1. Assemble beads on choker cable.
2. To cut cable shorter (optional), use heavy-duty flush cutters (like #69-057).
3. Remove smaller magnet end from larger end:
4. 1. insert free end of cable
   2. bend free end slightly
   3. while maintaining downward pressure, pull to remove magnet
5. Apply glue to free end. We recommend a strong 2-part epoxy (such as #60-230) or strong superglue such as Loctite.
6. Attach magnet end to cable. All the full cure time per adhesive instructions.

See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.