Browsing Tag

how-to

How To Make A Wire Bird Nest

February 10, 2014

It’s February, and snow and ice are covering every surface… which means I’d really like to fly away to someplace warm for the winter.

Wire wrapped bird nest bracelet with freshwater pearl beads and Vintaj bird charms.

Wire wrapped bird nest bracelet with freshwater pearl beads and Vintaj bird charms.

But I don’t have wings, so the next best thing is having Kayla explain how she makes these adorable wire bird’s nests. Continue Reading…

Embellish Jewelry Blanks with Crystal Chatons

November 11, 2013

It doesn’t matter if you’re a rhinestone cowgirl or an urban fashionista – dressing up belt buckles and other jewelry blanks with sparkling crystal chatons is just plain fun!

Use the steps below to either recreate the Zen Yin belt buckle by Jan or to embed you own designs in a wide range of jewelry components including bezel cups, buckle blanks, cuff links, and more.

supplies

1. Gather your supplies.

Supplies:

To make the exact belt buckle pictured in this blog, see the “Zen Yin” belt buckle full parts list in our Design Gallery.

tools

jewel setting tool makes it easy to set chatons in your jewelry clay.

Tip: A jewel setter makes it much easier to set small objects into the clay! While bare fingers can hinder your field of vision and upset other elements of the design, jewel setters provide a wax tip to lightly pick up and place small objects in just the right spot.

plan

2. Plan your layout.

Plan your layout before you unwrap the clay. This allows you to tinker with design options without the clay drying prematurely. This is especially important on large objects like a belt buckle.

Form two equal balls

3. Measure equal amounts of clay.

Wear thin gloves to protect your hands. Measure equal amounts of “A” and “B” types of clay, and form each material into a separate ball. If the clay sticks, apply a thin coat of vegetable oil.

Mix the clay

4. Combine.

Combine the two balls together until they are well blended and uniform in color.

Adding clay to your blank.

5. Press clay into jewelry blank.

Press the clay into your jewelry blank. You can smooth it out by adding a little vegetable oil on top. If it gets too sticky, dust it lightly with baby powder.

Embellishing jewelry clay

6. Place large objects & focals first.

Place larger objects and focal points into your clay first. Tip: To save time, you can leave strung beads on the string, rather than placing them individually in the clay. Trim excess string once the beads are in place.

crystal katana

7. Fill in remaining clay with crystal chatons.

Next, fill in the remaining exposed clay with sparkling crystal chatons. As mentioned above, a jewel setter can make this task quicker and easier. When you are placing your chatons into the clay, be sure not to press or tap them in to deeply. The clay will rise up a little bit around them particularly when it is very wet.

finished_belt_buckle

8. Allow clay to dry and you’re done!

Set aside your design in a safe spot and allow the clay to thoroughly dry, based on the manufacturer’s instructions. EnviroTex Jewelry Clay fully cures in 24 hours to a hard, durable, and shock resistant substance with a smooth, porcelain like surface. It does not shrink as it cures!

Below, check out more fun designs Jan made with EnviroTex Clay and crystal chatons.

donuts

These chunky donut beads are held fast in the crystal clay,
demonstrating how strong EnviroTex clay is!

Homer Simpson wouldn’t be able to resist this whimsical bit of bling! It’s made with donut beads, aurora borealis crystals, and a square bezel-cup pendant blank.

heart key chain

EnviroTex Jewelry Clay is durable enough for heavily-used objects
like key rings. Add heart to designs with heart bezel cups.

Heart-shaped bezel cups add an extra bit of love to jewelry designs.

seashore

Go nautical with embedded scallop shell beads and freshwater pearls.

Rectangle bezel-cups provide a great shape for custom pendants with a touch of bling. The design pictured above is adorned with shell beads and freshwater pearls surrounded by blue zircon and aquamarine crystal chatons.

three-rings

Adorn your hands with bezel cup ring blanks!

Bezel cup ring blanks come in several colors and shapes. Some styles are exclusive to Rings & Things, and all styles are adjustable to fit any ring size. They’re perfect for making blingy costume jewelry.

bear

You don’t have to use crystals.
This polar bear ring has seed beads embedded in the jewelry clay.

Embed seed beads and other objects in the crystal clay to see what other effects you can achieve! This winter-themed ring has a polar bear bead and a “Snow Ball” seed bead mix embedded in the clay. Let your imagination be your guide as you have fun making mosaic jewelry and a whole lot more! 🙂

How to Make a Metal Box

October 28, 2013

Make A Metal Box

A small metal box was turned into a framed reliquary, containing an antiqued frozen Charlotte doll. Create your own metal box that can be transformed into memory jewelry, a tiny shrine or used for some other whimsical (or practical) purpose.

Free jewelry project from www.rings-things.com by designer Sondra Barrington features a verdigris frozen Charlotte nested inside an antique brass framed reliquary box.

To make a metal box, first decide on the type of metal, and the size of the box you want to create. I recommend using 20 gauge sheet metal for strength and durability. Copper or brass sheet metal are nice choices as they are inexpensive and they antique nicely.

Anneal the metal before cutting so that it can be manipulated more easily. Heat it with a torch until it is glowing red, let it cool naturally and clean thoroughly.

Anneal the metal for malleability.  Be sure to clean it thoroughly afterward!

Cut the metal to size. This box was 1-1/2″ long and 3/4″ wide. It is 3/8″ deep. Draw lines of box using a Sharpie pen.

Draw lines for the metal box using a Sharpie pen.

Cut one line of each corner to the point where it intersects with another line. Using wide flat nose pliers, bend the ends in, and the sides up, to create the box shape. Carefully fold each end of the box into place, making the corners square and secure. File if needed to remove any uneven edges.

Fold ends together, snugly into place to create each end of the box.

Antique and colorize all parts you intend to assemble.

Antique and patina the frozen charlotte doll, the ornate brass frame and the brass metal box to create the reliquary.

Fill back of frame with two-part epoxy. Center box over ornate brass frame and press into epoxy to place.

Fill back of ornate brass frame with two-part epoxy.  Attach frame to top of box when epoxy is nearly set.

Using a two-part epoxy, UV resin, jeweler’s grade resin or other strong, clear glue, embed your treasures into your framed metal reliquary. Small toys, souvenirs, images layered in resin and tiny mementos are all used in creating custom memory jewelry.

Once epoxy has cured, you are ready to embed your treasure into the framed metal box.

Use epoxy to attach a magnet, let it cure and you are done! (Note: You could also attach a pin back or changeable bail in the same manner for a DIY jewelry brooch or pendant).

Use epoxy to attach a magnet to the back side of your brass reliquary.

 Questions? Please post them below!

Make Fashionable Ear Cuff Jewelry

October 9, 2013

If you haven’t yet jumped on the ear cuff bandwagon, now’s your chance! Some ear cuff designs include an earring post to hold the design in place, but many of today’s styles work for both pierced and non-pierced ears, making them as versatile as they are trendy.

Customer service rep Tracy and Gallery guru Amy made the following Five Ear Cuffs to showcase some of the styles popping up.

Spikes Galore Ear Cuff

Handmade ear cuff featuring spike beads and sparkly glass.

Lightweight plastic spike bead assortments give this ear cuff pizzazz and drama!

Continue Reading…

Make Your Own Halloween Jewelry

September 24, 2013

Halloween has always been one of my favorite holidays – I suppose because I love having an excuse to wear a costume. Honestly, candy has nothing to do with it! 😉

Apparently I’m not the only one who loves dressing up in ghoulish attire because our Halloween beads & charms are selling as fast as fun-size candy at the grocery store !

Below you’ll find 5 DIY Halloween jewelry tutorials, from cute to classy! You can make these projects with beads and supplies from Rings & Things. Happy jewelry making as the clock ticks towards Halloween …

Mmmwwwuuuaaahaahaahaahaa!

“Charmed” Bracelet

Fun charm bracelet made with TierraCast charms.

“Charmed” Bracelet

This hauntingly cool charm bracelet is made by attaching TierraCast Halloween charms and 4mm round Czech glass firepolish beads to a ready-made chain bracelet blank complete with clasp.
Click here for a full parts list, suggested tools, & tips.

“Ceramic Pumpkin Trio” Earrings

Easy jack o' lantern earrings project.

“Ceramic Pumpkins Trio” Earrings

Who doesn’t love easy earring designs? Choose from 3 different ceramic beads to make your favorite version of these cute seasonal danglers. The kidney wires insure a secure earring design that won’t fall out even during serious bouts of trick or treating!
Parts list, tips, & suggested tools here.

“Craneos y Flores” Bracelet

Gemstone skull bracelet.

“Craneos y Flores” Bracelet

One of our most popular designs this season is the “Craneos y Flores” bracelet which links gemstone skulls and ceramic spacer gear beads. This project is great for el Dia de los Muertos too!
Get the parts list, suggested tools, and tips here.

“Vintaj Pumpkin” Earrings

Autumn harvest earrings project.

“Vintaj Pumpkin” Earrings

These stylish harvest earrings pair Vintaj Natural Brass petal blanks, TierraCast leaves, and large bone beads colored with Vintaj Patina inks. This makes a great mixed media project for those of you who want to expand your jewelry making skills!
Click here for parts, how-to tips, & suggested tools.

“Fang’s” Pin

Metal work framed spider bar pin.

“Fang’s” Pin

For those of you who want to try metal stamping and riveting, this is the perfect project for you! Frame a spooky creature of your choice with a custom stamped brass frame. You’ll create a top-notch bar pin for your party agenda.
Suggested tools, parts list, and design tips can be found here.

Lady skeleton plastic cameo

Lady Skeleton Cameo ~ not a project, but isn’t it cool?

Okay, I admit this lady skeleton cameo isn’t a completed project, but it’s currently my favorite Halloween component. It’s available in two sizes, too! Choose from 25x18mm and 40x30mm.
What cool stuff can you make with it?

If the above projects aren’t enough to get your spine tingling, find more Halloween & Day of the Dead jewelry projects in our Design Gallery.

Keep in mind that you can always take the basic idea of a project and morph it into your own design. Don’t be afraid to experiment … Dr. Jekyll and Dr. Frankenstein would approve! ~ Melissa

Beadalon® Wire Banding Pliers

August 20, 2013

The initial bends when trying to band wire together can be frustrating. I have tried every tool, hoping to find something that would accurately bend wire into two perfectly-placed right angle bends without marring it. Now there is a specialty tool made just for perfect double right angle bends — Beadalon Wire Banding Pliers!

I am a perfectionist in the jewelry I create, and the last thing I want to do is fight with the very beginning of the project and end up with scratched banding, or having the banding bend be just a little off. Not only is it frustrating, but the accuracy of the banding can make or break the entire piece.

This tool is very easy to use — now you can quickly create two right angle bends close together, so you can neatly band the remainder of your wires together. We have created the graphic tutorial below to help you to learn how to use these cool wire banding pliers.

Please visit our Design Gallery for 100’s of free jewelry projects / tutorials, but we apologize that as of 2015 during a site upgrade, the 2 wire wrapping projects projects below have retired.

Wire wrapped bracelet project using Beadalon Wire Banding Pliers

Drusilla’s Bracelet of Submission by Amy Scalise

Wire wrapped bracelet project using Beadalon Wire Banding Pliers

Square Rose Ring by Valorie Nygaard-Pouzar

Although Rings & Things no longer sells any banding pliers, we’ve kept this infographic for those of you who already own some and need a quick refresher:

Make your wire bending projects easier with Beadalon Wire Banding Pliers

Beadalon Wire Banding Pliers Graphic Tutorial

How to Make Leather Bracelets – Two Finishing Methods

August 12, 2013

In this do-it-yourself jewelry-making tutorial, the bracelet blanks from last week’s blog post, “Customizing Tim Holtz idea-ology® Word Bands for a Handmade Look”, combine with Rings & Things’ new leather strips to make two styles of leather cuffs.

 

How to make a leather bracelet with metal stamped word band blanks.

Combine a customized bracelet blank with one of the many colors of Rings & Things’ leather strips to create a handmade leather bracelet.

 

Leather Bracelet Style One – A Single-Wrap Bracelet with Drawstring Clasp:

“In the Moment Leather Cuff Bracelet”

Tutorial: how to make a leather bracelet with drawstring clasp; a step-by-step DIY jewelry project.

Step 1: Gather together the supplies you will need to make a drawstring clasp leather bracelet.

You will need the following tools and supplies:

ruler

cutting mat

hobby knife

rotary leather hole punch

1/2″ wide leather strip

3mm suede lace

5-ply waxed linen cord

large-hole bead (hole size 4mm)

customized Tim Holtz idea-ology® word bands

Sharpie®, Extra Fine Point

 

Make a DIY leather bracelet: Cut the leather strip with a hobby knife.

Step 2: Cut the leather strip to length. Size the leather so it fits comfortably on the wrist, ends butted together; mark the leather at the cut length. Use a ruler and hobby knife to make a straight cut at the mark.

 

Tutorial Leather Strip Bracelet D

Step 3: Measure and mark the position of the holes to be punched (it is easiest to do this before you curve the word band). Mark two “stitching” holes on either side of the two word-band loops. Also mark a “lacing” hole set 1/4th inch from each leather end.

 

How to make holes in leather with a rotary leather hole punch.

Step 4: Use a rotary leather hole punch to cut holes in the leather strip at the marked positions. Use the smallest punch (2mm) to punch the stitching holes for the bracelet blank; use the largest punch (4.5mm) to punch the lacing holes for the drawstring closure.

 

How to attach a metal-stamped bracelet blank to a leather cuff using waxed linen cord.

Step 5: Align the bracelet blank with the punched stitching holes and stitch each side in place. The waxed linen cording is stiff enough to go through the 2mm holes without a needle. After making two or three stitches, pull the cord tight and secure with a knot on the backside of the bracelet.

 

How to make an adjustable drawstring closure for a leather cuff bracelet.

Step 6: To create the drawstring closure, lace the suede cord through one hole and then back out, so the cord tails are on the outside of the cuff. String both cord ends through the large hole bead. Combine both cord ends and make an overhand knot approximately 2″ from the cuff. Slide the bead to tighten or loosen the cuff.

 

How to use a drawstring closure on a handmade leather cuff.

“Live in the Moment” leather-cuff bracelet with drawstring clasp is ready to wear.

 

Leather Bracelet Style Two – A Double-Wrap Bracelet with Hitch Clasp:

“The Journey Leather Wrap Bracelet”

 

How to make a double-wrap leather cuff bracelet--you will need these supplies.

Step 1: Gather together the supplies you will need to make a double-wrap leather cuff bracelet with hitch fastener.

You will need the following tools and supplies:

ruler

Sharpie®, Extra Fine Point

cutting mat

hobby knife

rotary leather hole punch

screwdriver

1/2″ wide leather strip

idea-ology®, Hitch Fasteners

5-ply waxed linen cord

customized Tim Holtz idea-ology® word bands

 

How to make a double-wrap bracelet cuff--size and cut the leather strip.

Step 2: Cut the leather strip to length. Size the leather so it fits comfortably wrapped twice around the wrist; add one inch for the closure overlap. Mark the leather at the cut length. Use a ruler and hobby knife to make a straight cut at the mark.

 

How to make a leather cuff bracelet--measuring and marking for hole punching.

Step 3: Measure and mark the position of the holes to be punched (it is easiest to do this before you curve the word band). Place the leather on your wrist and determine approximate placement for the metal blank. Mark two “stitching” holes on either side of the two word-band loops. Also mark a “hitch” hole set 1/4th inch from the first leather end and 1/2 inch from the second end.

 

How to make a leather cuff bracelet--punching holes for a hitch fastener closure.

Step 4: Use a rotary leather hole punch to create holes in the leather strip at the marked positions. Use the smallest punch (2mm) to punch the stitching holes for the bracelet blank; use the largest punch (4.5mm) to punch the fastener holes for the hitch closure.

 

How to attach a metal-stamped bracelet blank to a leather cuff using waxed linen cord.

Step 5: Align the bracelet blank with the punched stitching holes and use waxed linen cord to attach the word band blank to the bracelet. Stitch the blank in place and knot the cord on the back side. For ease, a large sewing needle can be used.

 

How to make a hitch style clasp for a DIY leather cuff bracelet.

Step 6 a: On one end hole insert the screw side of the hitch fastener.

 

How to make a hitch style clasp for a DIY leather cuff bracelet.

Step 6 b: Attach and screw the hitch in place. From the backside, use a flat-head screw driver to tighten the hitch.

 

How to make a hitch style clasp for a DIY leather cuff bracelet.

Step 7 a: On the other end hole, use the hobby knife to cut 1/8″ slits on opposite sides of the hole, running parallel to the strip length. This will allow the hitch to slip into the hole, but stay securely in place.

 

How to make a hitch style clasp for a DIY leather cuff bracelet.

Step 7 b: Insert the hitch through the hole to close the fastener.

 

How to make a leather wrap bracelet with metal stamped blank --ready to wear.

“The Journey Leather Wrap Bracelet” is ready to wear!

 

Layer bracelets for a trendy look.

Bracelets can be worn together for a layered look.

 

Make things,

Mollie

 

Customizing Tim Holtz idea-ology® Word Bands for a Handmade Look

August 5, 2013
Use Tim Holtz idea-ology® word blanks to create "handmade" stamped bracelet blanks.
With just a few metalworking tools, you can easily turn Tim Holtz idea-ology® word bands into stamped bracelet blanks with a handmade appearance.

I love hand-stamped metal jewelry and given the popularity of this jewelry trend, chances are you do too. Metal stamping takes a few tools, basic stamping instruction, and practice; and sometimes more practice. But even though metal stamping is fairly easy, turning Tim Holtz idea-ology® word bands into bracelet blanks is even easier. Plus who can resist the 12 inspirational quotes?

The following is a DIY tutorial for turning Tim Holtz idea-ology® word blanks into curved bracelet blanks for use in your mixed-media jewelry projects.

You will need these tools and supplies to make a Tim Holtz idea-ology bracelet blank.
Step 1: Gather the tools and supplies necessary to customize your “stamped” metal bracelet blank.

You will need these tools and supplies:

Use the pein side of a chasing hammer and a steel block to add texture to Tim Holtz idea-ology word bands.
Step 2: For a handmade look, add a “hammered” texture to the word band.

Tape the word band, script side up, to the steel block with masking tape. Repeatedly strike the word band with the pein side of the chasing hammer to add a hammered texture. Remove the word band from the steel block.

 Use bracelet-bending pliers to turn the Tim Holtz idea-ology word band into a curved bracelet blank.
Step 3: Shape the word band with nylon-jaw, bracelet-bending pliers.

Use nylon-jaw, bracelet-bending pliers to turn the idea-ology word band into a curved bracelet blank. Place the flat blank lengthwise in the pliers’ jaw with the script side facing the concave half of the jaw. Gently squeeze the pliers. Reposition the blank and repeat until the word band is fully curved.

.

For a splash of color, paint the idea-ology word band's script with Vintaj patina.
Step 4: Add color to the word band script by applying Vintaj patina.

For a splash of color, paint the idea-ology word band’s script with Vintaj patina. Use a paint brush to liberally apply the patina to the word band, making sure patina is applied into all the letter indentations. You can use a mix of patina colors, or a single color. Allow to air dry for a few minutes.

.

 eWipe the surface of the word band with a damp paper towel or baby wipe to remove the excess patina. Be careful not to remove the color in the letter indentations.
Use a baby wipe or damp paper towel to remove the excess patina.

Wipe the word band with a damp paper towel or baby wipe to remove the excess patina. As you wipe, be careful not to remove the color in the letter indentations. Allow the patina to fully dry.

To finish a bracelet, just stitch or rivet the idea-ology word band bracelet blank to a leather cuff.
The finished “handmade” bracelet blank is ready to adorn the bracelet of your choice.

Now your “stamped” bracelet blank is ready to adorn your choice of bracelet (or maybe you turned all 12 word bands into bracelet blanks). In the next Rings & Things Blog post (How to Make Leather Bracelets – Two Finishing Methods), I will share two ways to finish leather cuff bracelets using the customized word bands and our new colorful leather strips. oh, and “word” from Tim Holtz is we can look forward to new styles of word bands coming soon, “Word Bands Observation” and “Word Bands Christmas”.

Make things!

Mollie

Create a Hinged Metal Memory Journal

July 18, 2013

Use a hinge to turn shrine-shaped metal blanks into a journal!

Decide on the layout, location of the hinge and other decorative elements. Using a checkered hammer, apply texture to the top and bottom panels of the journal. Patina, file rough edges and clean.

Hinged Pendant Memory Journal Rings & Things. This free DIY jewelry project features metal etching, metal stamping, dapping and riveting. Antique brass, nickel silver, copper and natural agate were used in creating this design. The one-step looping plier was used for the handmade chain.

Layout

Cut the hinges, which can be as wide or as narrow as you choose. For 3/32 tubing, make hinges that are one-half inch deep. You need an odd number of hinge tabs. Measure, mark and saw tabs into the top panel. Use plenty of cut lube to prevent the saw blade from sticking when cornering.

Hinged Pendant Memory Journal Rings & Things. This free DIY jewelry project features metal etching, metal stamping, dapping and riveting. Antique brass, nickel silver, copper and natural agate were used in creating this design. The one-step looping plier was used for the handmade chain.

Create Hinge Tabs

Using wide, flat nose pliers, crease and fold each tabs up to a 90 degree angle. The position of the fold determines whether the hinge will be visible from the front of the pendant, or only from the back side. Keep the textured sides face up, so the design is consistent.
Carefully roll tabs into cylinders using chain nose pliers or medium bail making pliers. Leave hinges a bit loose until after you have inserted the tubing, then you can tighten for best fit.

Hinged Pendant Memory Journal created by Sondra Barrington of Rings & Things. This free DIY jewelry project features metal etching, metal stamping, dapping and riveting. Antique brass, nickel silver, copper and natural agate were used in creating this design. The one-step looping plier was used for the handmade chain.

Roll Into Cylinders

Use a tube cutting jig to cut a length of tube 1mm longer than the width of your piece (for 1/2mm on each side).

Hinged Pendant Memory Journal created  Rings & Things. This free DIY jewelry project features metal etching, metal stamping, dapping and riveting. Antique brass, nickel silver, copper and natural agate were used in creating this design. The one-step looping plier was used for the handmade chain.

Cut Tubing

Slide tubing down the channel and finesse hinges as needed. Rivet tubing into place to finish the hinge. Open and close hinge to ensure a proper fit.

This free DIY jewelry design by Sondra Barrington features antique brass, nickel silver, metal etching, dapping and creating hinges.

Assemble Hinge and Insert Tubing

Working with the bottom panel, lay out etched metal pieces for the cover and inside page. Cut, file and patina as necessary. Leave sufficient room for the hinge to lay flat against the bottom panel.

Hinged Pendant Memory Journal created by Sondra Barrington of Rings & Things. This free DIY jewelry project features metal etching, metal stamping, dapping and riveting. Antique brass, nickel silver, copper and natural agate were used in creating this design. The one-step looping plier was used for the handmade chain.

Lay out Etched Metal Page

Measure, mark and punch holes for decorative rivets, accents and center piece (using the small side of the hole punch).

Hinged Pendant Memory Journal created by Sondra Barrington of Rings & Things. This free DIY jewelry project features metal etching, metal stamping, dapping and riveting. Antique brass, nickel silver, copper and natural agate were used in creating this design. The one-step looping plier was used for the handmade chain.

Prepare Embellishments

Using two-part epoxy, carefully glue the etched metal panels into place.

Hinged Pendant Memory Journal created Rings & Things. This free DIY jewelry project features metal etching, metal stamping, dapping and riveting. Antique brass, nickel silver, copper and natural agate were used in creating this design. The one-step looping plier was used for the handmade chain.

Lay out Etched Metal Page

Using a dapping set, dome two small round shapes that can nest one inside the other. Patina, file away any rough edges and clean the domed metal. Layer, and rivet domed metal nests onto the top panel. Connect top and bottom panel with rivets. Use a tube rivet at the top so that you can thread a jump ring through it (if you choose).

Hinged Pendant Memory Journal created by Sondra Barrington of Rings & Things. This free DIY jewelry project features metal etching, metal stamping, dapping and riveting. Antique brass, nickel silver, copper and natural agate were used in creating this design. The one-step looping plier was used for the handmade chain.

Rivet Domes Into Place

Carefully clean and polish the pendant before attaching the necklace chain.

Hinged Pendant Memory Journal created by Sondra Barrington of Rings & Things. This free DIY jewelry project features metal etching, metal stamping, dapping and riveting. Antique brass, nickel silver, copper and natural agate were used in creating this design. The one-step looping plier was used for the handmade chain.

Clean Finished Pendant

Handmade jewelry looks great on a custom beaded necklace, on leather cording, silk ribbon or chain. I created a necklace by making individual links using the one-step looping plier, eye pins, metal beads and natural agates. The links were connected using jump rings.

Hinged Pendant Memory Journal created by Sondra Barrington of Rings & Things. This free DIY jewelry project features metal etching, metal stamping, dapping and riveting. Antique brass, nickel silver, copper and natural agate were used in creating this design. The one-step looping plier was used for the handmade chain.

Memory Journal Necklace

This free DIY Memory Journal pendant was created by designer Sondra Barrington of Rings & Things. This necklace features riveting, metal etching, antique brass shrine stamping blanks, dapping, and metal stamping. The chain was created in an ombre pattern using natural agate gemstone beads, TierraCast antique brass bead caps, metal heishi trade beads and the one-step looping plier with antique copper head pins.

Easy to Make Lashed Rhinestone and Leather Bracelet

July 10, 2013

Learn to make a rhinestone and leather bracelet in just minutes.

Create wrapped bracelets with this simple lashing technique.

Making wrapped bracelets just got easier because this simple lashing technique takes just minutes to learn.  You can combine leather cord with rhinestone chain for a sophisticated style or use ball chain and leather for an industrial look.

Continue Reading…