Rings and Things

Iridescent Luster Gel for Silver is a brand-new product that makes it easy to change the color of silver jewelry. Unlike patina solutions that mostly* darken or oxidize the metal, Luster Gel creates a whole rainbow of different colors. The best part is, the colors appear in a reliable order! (*I say mostly because it is possible to get cool rainbows when using liver of sulfur…however, the process is less predictable and may require additional chemicals or heat.)

Sterling silver Buddha / bodhisattva beads before and after being treated with Luster Gel. The blue color takes 20-30 minutes to achieve.

Sterling silver, fine silver and silver-plated jewelry pieces can all be colorized with Luster Gel.  Since patinas are created via chemical reactions, anti-tarnish treatments and coatings could interfere with the gel’s performance. Also, follow the basic chemical safety rules when working with this product: avoid skin contact, wear eye protection and work in a well-ventilated area. Don’t eat it either!

Iridescent Luster Gel for Silver

Luster Gel is sold in a 4 oz. jar and needs to be mixed with water and the included activator powder prior to use.

Luster Gel gets its green color from cupric (copper) acetate.

For each batch of Luster Solution, mix, in order:

1. 100 ml (about 3.5 oz.) filtered water (use warm – not hot – water for a more rapid color change)
2. 30 ml (1 oz. / 2 tablespoons) Luster Gel (stir before use)
3. 1/2  teaspoon Luster Activator

Once mixed with the activator, the Luster Solution turns dark orange.

Dip your piece into the solution (use a string or a plastic hook, or wear gloves, to avoid touching the solution). Over the next 30 minutes, the silver will change from yellow to gold, then orange – red – brown – purple – and finally blue. If you leave it in longer, it will go through the same color-change process again, only this time the colors will be deeper and more iridescent.

Once you are happy with the color, pull your piece out of the solution, rinse with clean water and allow it to air dry. Once it is completely dry, seal it with Renaissance Wax or a clear spray sealer to protect the finish. That’s it. Super easy!

When you are done, mix baking soda into the Luster Solution to neutralize it. At that point you may safely dispose of it by washing it down the drain.  Happy rainbows to you! ~ Cindy

[stextbox id="download"]

Extra midweek fun: we updated our Tuesday Tunes today.

(Hint: put on your boogie shoes!)

[/stextbox]

Print PDF