Our Location

Hello!

Address

304 E. Third

Phone

1 (800) 366-2156

How To Make Personalized Stamped Charms

How To Make Personalized Stamped Charms
Feb
05

Hand metal stamping is a quick and easy way to customize and personalize jewelry, cell phones, purse clips, pet tags and more. You can express yourself with a phrase or word, or personalize something with a simple initial. Monogram stamps are ideal for this, though Rings & Things carries a variety of fun font stamps that also work well.

Turn a plain metal blank into something personalized and special.

A simple initial turns a plain metal blank into something personalized and special.

Two sets of initials plus a design stamp can be inspired by lovers or best friends.

Two sets of initials plus a design stamp can be inspired by lovers or best friends.

One way to tell someone they are special is with a custom stamped charm with their astrology sign and birth date.

Let’s make one featuring the new zodiac sign Ophiuchus now available with our new line of zodiac metal stampsWith a little online research, I found that some main stream astrologers have now accepted the new sign of Ophiuchus (the serpent bearer), which has moved the other dates around a bit, but I understand that the new schedule only applies if you were born after 2011. People born on November 29, 2011 would be the very first to have the zodiac sign Ophiuchus.

The required tools can be minimal, but there are many optional supplies for the precision-planners and tool junkies.

Collect your supplies & tools for stamping a custom charm: A metal blank, metal file, tape, metal stamps, a steel block and a brass hammer.

Collect your supplies & tools:  A metal blank, metal file, tape, metal stamps, a steel block and a brass hammer.

Supplies Needed

Basic minimum tools needed

#69-298 Rings & Things Exclusive Metal Stamping tool kit for beginners.

#69-298 Rings & Things Exclusive Metal Stamping tool kit for beginners

1. File any sharp or rough edges on your stamping blank. Even pre-cut blanks can be a little sharp around the edges. When working with softer metals like sterling silver, I like to use a fine grit (320-400) sanding sponge to smooth the edges. The sanding sponge will also be useful later in the patina process.

File any sharp edges.

File any sharp edges.

2. Figure out your spacing and stamp placement. To get a nice curve with the date, I used a Sharpie® pen to make a guideline. Then I drew an approx 6mm box to indicate where the zodiac sign will go. Sharpie comes off easily with a little fingernail polish remover.

Figure out your spacing and stamp placement.

Figure out your spacing and stamp placement.

3. Tape the metal blank to your steel block to keep it from slipping or moving while you stamp.

Tape the metal blank to the steel block.

Tape the metal blank to the steel block.

4. Start stamping. Position the stamp straight up and down making sure it is perfectly level. Using a brass head hammer, strike the stamp with one firm blow. Repeat with each impression you make. To make the date symmetrical, I stamped the middle part (day of the month) first, then the year on the right, and then the month on the left.

Position the stamp straight up and down making sure it is perfectly level.

Position the stamp straight up and down making sure it is perfectly level.

5. Flip the blank over, and use a nylon hammer to flatten any curviness that happened with the stamping.

A nylon hammer used on the reverse side of a stamped blank will flatten it back out.

A nylon hammer used on the reverse side of a stamped blank will flatten it back out without marring the surface of the charm.

6. Use steel wool or super fine sanding sponge #69-257-0003  to buff out blemishes and scratches, as well as removing the marker guidelines we drew.

Use a sanding sponge to buff out scratches and blemishes.

Use a sanding sponge to buff out scratches and blemishes.

7. Clean with soap and water or rubbing alcohol to prepare for oxidizing. A properly prepared surface will be clean and shiny.

Clean and shiny!

Clean and shiny!

8. Oxidize or patina the metal to darken the stamping impressions. There are many solutions available for this; today we will use Novacan Black Patina #86-310.

Prepare to patina! Novacan, a paper plate and a cotton swab are all you need.

Prepare to patina! Novacan, a paper plate and a cotton swab are all you need.

9. Using a cotton swab, paint the Novacan onto the metal blank until it is covered in black.

Completely coat the metal with the oxidizing agent.

Completely coat the metal with the oxidizing agent.

 

10. Let it dry, then buff again with the sanding sponge to remove the patina from the raised parts, leaving the stamping impressions dark.

Remove the patina from the raised surface with a sanding sponge (or steel wool).

Remove the patina from the raised surface with a sanding sponge (or steel wool).

11. Gently polish with an Ultra-polish pad #63-528 to make it shine!

Ultra-polish pads will make your piece shiny

Ultra-polish pads will make your piece ultra shiny.

 

12. To finish, add some birthstone dangles, a jump ring and chain!

"Ophiuchus the First" Stamped Pendant.

“Ophiuchus the First” Stamped Pendant.

Bridal gifts are another popular way to share the gift of personalized metal stamping!

Be extra careful when stamping sterling silver or gold filled. It’s good to practice on base metal or even better to practice on a scrap of sterling sheet if you have some. Sterling silver is much softer; you won’t need to hit the stamp quite as hard as you would for base metal. Gold fill varies in hardness, so may take a bit of practice.

Pendants for the bride and bridesmaids are elegant jewelry, as well as keepsakes that will last forever.

Pendants for the bride and bridesmaids are elegant jewelry, as well as keepsakes that will last forever.

"Ava's Big Day" hand stamped sterling silver pendant.

“Ava’s Big Day” hand stamped sterling silver pendant (Click image for tutorial).

Ava's Ladies in Waiting Bridesmaid Necklace

Ava’s Ladies in Waiting Bridesmaid Necklace (Click image for tutorial).

More metal stamping inspirations…

 

"A Dog's Night Out"  dog collar/necklace featuring a custom stamped tag. Tutorial.

“A Dog’s Night Out” dog collar/necklace featuring a custom stamped tag. (Click image for tutorial.)

 

"Live with Intention" cuff bracelet - Tutorial

“Live with Intention” cuff bracelet. (Click image for tutorial)

I hope you found this metal stamping tutorial informative and inspirational! Happy stamping!

~Val

Print Friendly
Comments (2)

This is a really good tutorial on metal stamping. Now I know what I was doing wrong and what else is needed to do it right.

There is some really lovely designs on this tutorial especially the dog bone charm as my dear fur baby passed away a month ago and would like something like this to remember him. I also love the wedding set but at the moment I’m so into cuffs with added bits and bobs like the one above.

Leave a Comment





  • Recent Posts

  • Recent Comments

  • Archives

  • Tags

  • Meta