null

493 results for 'Eye Pin 3 Standard'

Suggestions:

Categories

News & Information (453)

    Gemstone Index: Tiger Eye(Post)

    Richly striped tigereye is a variety of quartz with a fine luster. These semiprecious beads are available in their natural, unenhanced brown-gold state, and sometimes in heat-treated blue or red. Als ...

    Promise Pin Tutorial(Post)

    Created by: Mollie Valente Designer TipsUse 26-gauge wire to lash the beads to the pin back.Cut the chain into two pieces: 5-1/2" and 6-1/2" in length.Use 6mm jump rings to attach the chain to the pi ...

    How to Make Loops on Head & Eye Pins(Post)

    Basic Loops:The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about 1/3 of the way f ...

    Paisley Palette Pin Tutorial(Post)

    Created by: Polly Nobbs-LaRue Designer TipsFor best placement of the holes, make a template: Trace the outline of the paisley on a piece of paper (a Post-it® works great!), then use a pencil to sketc ...

    Fidget - Hinged Book Pin Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsRead the instructions included with the rivet piercing/setting tool (#69-900>69-900). Also check out the instructional video for more information on using ...

    Goodnight Moon Pins Tutorial(Post)

    Created by: Polly Nobbs-LaRue Designer TipsCut loops off the moon charms and file smooth.For one pin, antique the brass components and bar pin with Win-Ox™ before assembling. Allow the parts to ...

    Puppy Love Pin Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsThe Complete Metalsmith (#62-011) provides a useful chart for selecting saw blades. Or scroll down to the comments section of our "Tips for Sawing Sheet Metal w ...

    Ocean Pearl Hat Pin Tutorial(Post)

    Learn an inexpensive hack for avoiding the wobblies with large-hole beads.Created by: Mollie ValenteDesigner TipsString the first three beads onto the hat pin finding: 3.4mm heishi-style metal bead, ...

    Area 51 Pin Tutorial(Post)

    I made this pin when the UFO and alien stamp first came out, but they are no longer in production. But there are so many other fun options for customizing this blank with features for other states! A ...

    Transylvanian Visitor Pin Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsLaminate or seal the image with Crafter's Pick™ The Ultimate adhesive.Glue the image onto the blank "back" with the Crafter's Pick.Use side cutters to remove p ...

    Bat Signal Magnetic Pin Tutorial(Post)

    Created by: Mollie ValenteFor step-by-step instructions -- with photographs -- for this project, see our blog article: Jewelry Making: DIY Bat-Signal Magnetic Pin.Parts-List and More Links Below...Su ...

    Can Can Flowers Bobby Pins Tutorial(Post)

    Created by: Toni Plastino   Designer Tips  Cut and flatten aluminum soda cans of your choice. Pick ones with interesting colors and patterns.Cut flower shapes with craft punches.Paint the f ...

    Wayfaring Eyes Eyeglass Lead Tutorial(Post)

    Created by: Amy Mickelson   Designer Tips  Center an approximately 12x18mm oval bead of your choice between 2 triangle spacers on a length of waxed linen cord. Tie overhand knots on each si ...

    Swarovski Emerald Eye Necklace Tutorial(Post)

    Modified from a design created by Swarovski's Create Your Style Design Team Designer Tips Using the 1.5mm plier punch, or the smaller (silver) side of the 2-hole punch, make 6 holes in ...

    Crowned Bobby Pin Tutorial(Post)

    Created by: Rita Hitchinson   Designer TipsUse a ready-made silicone mold of your choice or make your own mold with Amazing Mold Putty.Lightly dust the mold with metallic powder. Tap off excess.

    Gear Head Bobby Pin Tutorial(Post)

     Created by: Polly Nobbs-LaRue Designer Tips Always wear safety glasses when cutting, drilling or punching.The bobby pin is a little heavier gauge than recommended for the punch, so us ...

    Enameled Orchid Eye Tutorial(Post)

    Created by: Mollie Valente Make your Enamel DiskUse the dapping set to dome the copper blank. (See Rings & Things blog post: How to Dap and Dome Metal Jewelry.)Fire the concave (back side) o ...

    Simple Aromatherapy Earrings(Post)

    Created by: Guest Designer Deb FlorosSuggested Supplies1 #21-888-925 White "Lava" Stone Beads, 8mm Round (strand)1 #37-482-03-AP Antiqued Pewter Plated Head Pin, 2", Woven End (100 Pieces)2 #44-049-1 ...

    Blue Pin Stripe Lashed Memory Wire Bracelet Tutorial(Post)

    This project uses durable, springy memory wire as the base, and 26-gauge dark blue Artistic Wire as an accent. Created by: Amy MickelsonDesigner TipsUse heavy-duty cutters to cut memory wire.Lashing ...

    Stars and Stripes Earrings Tutorial(Post)

    Created by: Kayla HeflingDesigner TipsAttach the French clip to the eye pin. See Basic Jewelry-Making Technique Sheet (PDF) for best way to open and close loops.Add bicones and briolette crystal to t ...

    Fashion and Function Pin Cushion Ring Tutorial(Post)

    Created by: Amy Mickelson Designer TipsCreate a cardboard template 2.5 times the diameter of the bezel (approximately 2.25" for this ring).Using a doubled 36" piece of sewing thread, knotted at ...

    Trilogy of Treats with no Tricks - Earrings Tutorial(Post)

    3 fun pairs of Halloween earrings created by: Swarovski's Create Your Style Design Team (slightly modified by Rings & Things to replace discontinued items.)Designer TipsFor the black cat earrings ...

    Swarovski Trio of Opulent Earrings Tutorial(Post)

    Modified from designs created by Swarovski's Create Your Style Design Team. February 2022 update: We still have many of the baroque pearls from Swarovski's 2020 launch in stock, and they're awes ...

    Pretty in Pink Bracelet Tutorial(Post)

    Created by: The Swarovski Design Team Designer TipsFor best way to open and close loops, see Jump Ring Hint in Jewelry Basics 101 (PDF). Suggested Supplies1 6-pack #02-088-34-182  ...

    Drops of Sunshine Earrings Tutorial(Post)

    Created by: Rings & Things StaffDesigner TipsStack one aquamarine bead, one twisted spacer and one citrine onto each eye pin, and make a wire-wrapped looop to close at each end, making sure to at ...

    Southwest Chandelier Earrings Tutorial(Post)

    Created by: Rita Hutchinson. Designer TipsWhen you trim the eye pins on the 3 bead sections, retain two of the pieces to use for the shorter 2 bead section instead of using another whole eye pin.Open ...

    Lady 12 - Go Hawks - Earrings Tutorial(Post)

    Created by: Liz GrafDesigner TipsPlace your spacer beads, cobalt blue bicones, and peridot round crystals on the eye pin in order.Create (and close) your eye pin the opposite direction of the way the ...

    Blooming Lotus Earrings Tutorial(Post)

    Created by: Mollie Valente Designer TipsAttach the eye pin loop to the crystal pear charm (twist loop open and closed).String on beads in the following order: 3mm silver-plated heishi bead, ...

    Pearls Before Swine Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsCreate a saddle for the pig with two filigrees wrapped around his middle.Use jump rings to connect the two filigrees at the top. Carefully bend the filigrees ar ...

    Baroque Beauty Necklace Tutorial(Post)

    Designer TipsUsing one eye pin, slide on one 6mm 5328 bicone bead and make a simple loop. Repeat 30 more times and set aside. New to making jewelry? See Jewelry Basics 101 (PDF).Using an eye pin ...

    Patriotic Drops Earrings Tutorial(Post)

    Created by: Amy ScaliseDesigner TipsUse the 1-Step Looper to create 36 (12 of each color) crystal pearl dangles.Cut two 1" pieces of chain and attach approximately 2 dangles per link directly onto th ...

    BeBop Blues Earrings Tutorial(Post)

    This project uses Swarovski crystal pearls. Created by: Cindy MorrisDesigner TipsSince you only need to make simple loops and open/close jump rings, these earrings are a perfect project to make on th ...

    Man in the Maze Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsString three 8mm round gemstone beads on an eye pin.Finish the end of the eye pin with a wrapped loop; snip off the excess eye-pin tail. For step-by-step instru ...

    Frida's Hands Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsString the following beads onto a eye pin: 1 round corrugated-metal bead, 2 rubber wire keepers (these work as positioning beads for the large-hole Mirage bead) ...

    Independence Day Fireworks Earrings Tutorial(Post)

    Mix & match your favorite shades of red, white and blue -- we used Siam, Light Siam, Alabaster, Opal, Sapphire and Capri, but linked in a few other shades below as well.Created by: Polly Nobbs-La ...

    Hibiscus Flower Earrings(Post)

    Created by: PRESTIGE CrystalSuggested Supplies1 #34-962 Argentium Silver French Hook Earring Wires, Plain (pair)1 #37-722-3 Silver Plated Eye Pin, 2", Standard (Pack)2 #49-947-11-WB TierraCast Interm ...

    Low Tide Asymmetrical Earrings Tutorial(Post)

    Created by: Mollie Valente Designer Tips: Earring 1String a pear-shaped pearl and a 3mm corrugated bead onto a head pin. Form a wrapped loop. (See Jewelry Basics 101 PDF).Twist open the Vin ...

    Briolette and Vine Earrings Tutorial(Post)

    Created by: Cindy MorrisDesigner TipsAdd a bead cap, 6mm aventurine gemstone bead, and another bead cap to the eye pin, and make a simple loop. New to jewelry-making? See Basic Jewelry-Making Techniq ...

    TierraCast Succulent Post Earrings Tutorial(Post)

    Created by: TierraCastDesigner TipsPlace one bicone, one 8-10mm amethyst rondelle and another bicone onto eye pin. Cut remaining eye pin with wire cutters, leaving .25" to form into loop to close. At ...

    Spiders and Skulls Jewelry Set Tutorial(Post)

    Created by: Liz GrafDesigner Tips - For Necklace:String crystals, skull beads, and beads on beading cable. Finish each end with a crimp tube and wire protector.Attach spider charms with jump rings to ...

    Gentle Souls Bracelet 3 Tutorial(Post)

    As a graceful nod to the free-spirited Bohemian trend, we created a set of beautiful bracelets in softly muted hues: smoky quartz, warm gold, smoked topaz, antique brass, rose gold amber and iridesce ...

    Graveyard Sweater Guard Tutorial(Post)

    Created by: Liz Graf   Designer TipsMeasure the 3.9mm chain, and cut one 4" piece, and one 5" piece.Measure the 4.5mm chain, and cut a 6" piece.Attach the chains to the sweater guards with large ...

    Belle of Ireland Necklace Tutorial(Post)

    Created by: Liz GrafDesigner TipsMeasure and cut cotton cord to 20".Cut 2 sections off the chain (10 links each section).Pick out six 4mm jump rings and one 6mm jump ring.Place 8 heishi beads on the ...

    Hunter-Gatherer Earrings Tutorial(Post)

    January 21 is Squirrel Appreciation day in the United States. Celebrate these quirky Sciuridaes with us!Created by: Mollie ValenteDesigner TipsPlace the squirrel charms on the rubber block and polish ...

    Garden Magic Bookmark Tutorial(Post)

    Pair the magic of books with the magic of a garden forever in full bloom!Created by: Liz GrafDesigner TipsTwist to open the loop on the eye pin, add dragonfly charm, and close loop. For most secure w ...

    Craters of the Moon Earrings Tutorial(Post)

    Learn simple but effective techniques to hammer-texture and dome metal disks to create beautiful handmade earrings.Created by: Mollie ValenteHammer and Dome the BlanksPlace a Vintaj blank on the stee ...

    Lu Star Earrings Tutorial(Post)

    Created by: The Swarovski Crystal CREATE YOUR STYLE Design TeamDesigner TipsUsing one eye pin, attach one Chinese Lu Charm to the bottom.Slide on one 6mm gold bicone crystal, one 10mm Rouge pearl, an ...

    Dragonfly Drop Earrings(Post)

    Created by: PRESTIGE CrystalSuggested Supplies 1 #37-295-460 Sterling Silver Jump Ring, Round - 6mm, 20.5-gauge (10 Pieces)1 #34-569-04 TierraCast Sterling Silver Earring Hook with 2mm Bead (pair)1 ...

    Fleur de Bee Pendant - Necklace Tutorial(Post)

    Created by: Sondra BarringtonDesigner TipsPatina the bee and darken the frame with Win-Ox™.Apply wax to seal the pieces, after you have achieved desired patina effect.Attach the bee and filigree usin ...

    On Target Earrings Tutorial(Post)

    Use any combination of seed bead and heart colors, with Chevron-bead plating colors that you like. There are hundreds of possible combinations.Created by: Rita HutchinsonDesigner TipsAdd chevron and ...

    Tangerine Delta Earrings Tutorial(Post)

    Created by: Megan HoldenDesigner TipsClean the inside of the rivoli settings with alcohol swabs, and allow to dry.Place a small drop of E-6000 or GS Hypo Cement into the cup of each setting and light ...

    Spring Luna Necklace(Post)

    Created by: PRESTIGE CrystalSuggested Supplies1 #49-965-69-AS TierraCast Luna Moth Pendant Link - Antiqued Silver Plated (Each)1 #06-106-CIGR16 PRESTIGE 6106 16mm Pear-Shaped Pendant Citrus Green2 #0 ...

    Pearl and Tassel Charm Leather Bracelet Tutorial(Post)

    Created by: Sondra Barrington Designer TipsThe ring connector is the focal of this bracelet. For a more free-flowing design, attach charms to the leather cording.Wire-wrap a pearl bead with a la ...

    Winged Heart Brooch Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsUse two-part epoxy to glue two magnets to the back of the BRONZclay™ piece.Two earring magnets and backings make for a secure hold on clothing.When not being w ...

    Crystal Tree Earrings Tutorial(Post)

    Designer TipsAdd a smoky quartz cube bead to the head pin, then add the largest fern green margarita bead, then 1 each of the rest of the margarita beads in decreasing size order, and top with the me ...

    Oval Constellation Pendant Tutorial(Post)

    Make this constellation pendant with crystal head pins and ball-end head pins for different sizes of stars, using Swarovski Ceralun Ceramic Epoxy Clay.Created by: Sondra BarringtonDesigner TipsBegin ...

    Constellation Pendulum Pendant Tutorial(Post)

    Make this constellation pendant with crystal head pins and ball-end head pins for different sizes of stars, using Swarovski Ceralun Ceramic Epoxy Clay.Created by: Sondra BarringtonDesigner TipsBegin ...

    Aventurine Spiral Clip-on Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsAdd desired beads to eye pin, and use one-step looper (or wire cutters and round-nose pliers) to make a simple loop at the other end.When creating your new l ...

    Memory Journal Necklace Tutorial(Post)

    Created by: Sondra BarringtonDesigner TipsSee the Create a Hinged Metal Memory Journal blog post for a step-by-step tutorial with images.Texturize or etch* various metal pieces for the journal and pa ...

    Balancing Act Asymmetrical Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner Tips - Earring 1Attach a tiny heart charm to the end of an eye pin. String on a rose-peach pearl and form a simple loop on the end. Then attach to the the end link ...

    Interchangeable Constellation Bangle Bracelet Tutorial(Post)

    Create sparkling constellation jewelry in an hour, using minimal supplies and Swarovski Ceralun Ceramic Epoxy Clay, Crystal Clay, or your favorite epoxy clay. This quick-change bracelet form allows y ...

    Icicle Lights Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesign by: Swarovski's Create Your Style Design TeamDesigner TipsAdd a crystal teardrop bead to a head pin (narrow side towards the head of the pin), add a rhinestone wheel ...

    Fire Cracker Crystal Bracelet Tutorial(Post)

    With this Fire Cracker bracelet, there is NO CHANCE you will not stand out at any Independence Day gathering, even with social distancing. This exquisite piece of jewelry is very easy to make, but it ...

    12th Man Earrings Tutorial(Post)

    Create a pair of sparkling earrings for your favorite football fan! These take just 5 minutes, and a few basic jewelry tools. No glue required, either!This pair of earrings features a "12" charm, but ...

    Beachcomber Wine Glass Charm Set Tutorial(Post)

    Created by: Veronica GreenwoodDesigner TipsCreate a colorful beaded drop for each wine glass marker, using gemstones or other beads of your choice. New to jewelry-making? See Basic Jewelry-Making Tec ...

    Forest Fairy Angel Earring Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsAdd crystals, angel wing beads and spacers to head pins and finish with a simple loop. (See Making Earrings 101 below for instructions to make loops.)Because t ...

    Custom Mothers Day Stamped Necklaces(Post)

    Here's a Mother's Day / Grandmother's birthstone jewelry idea that allows each child to stand apart from the others.Created by: Tiffany WhiteDesigner TipsNot sure which birthstones go with the months ...

    Retro Tree Earrings Tutorial(Post)

    The metallic glint of silver shade Margarita sew-ons reminds me of the retro aluminum Christmas trees of years gone by. I mixed up the crystals with TierraCast Bead caps, which echo the shape of a tr ...

    Brass Arrow Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsCut the wire in half and form an "eye" loop on one end of each wire.Flatten the loop by striking with a chasing hammer on a steel block.Add the following beads ...

    Dumortierite and Copper Coin Necklace Tutorial(Post)

    Created by: Dee MuellerDesigner TipsCreate bead connectors with the 8mm rondelles and 14mm faceted round beads.Cut eight 1" pieces of chain. With jump rings attach two pieces of chain to each of six ...

    Sparkling Soiree Wine Charms Tutorial(Post)

    InstructionsMake simple beaded loops using the 2" eye pins and 10-18mm beads of your choice - see Jewelry Basics 101 (PDF) for step-by-step instructions on making loops on head and eye pins.Using the ...

    Favorite Brew - Magnet Tutorial(Post)

    Here's a great way to upcycle cool bottle caps from your favorite beverages! Collect them on vacation, and at family gatherings throughout the year, then turn them into vacation mementos, or birthday ...

    From Bridal to Bright Shoe Clips Tutorial(Post)

    Created by: Amy MickelsonDesigner TipsShoe clips work like clip-on earrings, but for shoes. Simply add or remove finished designs from footwear whenever you want to display a different mood! Create a ...

    Metal Stamping 101(Post)

    Make your own custom charms, pendants, connectors, tags and more! Metal stamping is not only the latest craze — it's also a lot of fun and gives you design freedom. Plus, handcrafted metal components ...

    Angel in Training Earring Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsAdd crystals, angels wing beads and spacers to head pins and finish with a simple loop.Because the large end of the dome beads are concave, it can be tricky t ...

    Shadow Angel Earring Tutorial(Post)

    Note: this design originally used the (discontinued) Lilac Shadow color of dome bead. Suggested subs: Jet Black Large Dome, or Crystal AB Small Dome. Both are 11mm in diameter.Created by: Rita Hutchi ...

    Pearl Wraparound Swarovski Necklace Tutorial(Post)

    Created by: Swarovski's Create Your Style Design TeamDesigner TipsUsing one head pin, slide on one 5844 10mm elongated baroque pearl, make a simple loop and set aside. Repeat 29 more times and set as ...

    Buried Treasure Acorn Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsString the 4.5mm round corrugated bead onto the head pin.String two rubber earring backs onto the head pin, the first one positioned against the 4.5mm round cor ...

    Snowy Crystal Christmas Tree Earrings Tutorial(Post)

    Design by: Swarovski's Create Your Style Design Team and Rings & Things.Designer TipsFor each earring, string onto one head pin: one 12mm margarita; one 10mm margarita; one margarita 8mm; one 6mm ...

    Summer Blues Earrings Tutorial(Post)

    Design by Create Your Style team at Swarovski North America.Although these weren't designed with September in mind, the colors are perfect for September birthstone jewelry.Designer TipsAdd one 4mm li ...

    TierraCast Bee Bracelet Tutorial(Post)

    Created by: TierraCastDesigner TipsCut 20" of 1.5mm cord in your choice of color and cut again into 2 pieces, one 12" and one 8".Feed one open end of each cord through each end of honeycomb link (as ...

    Polynesian Sunset Earrings Tutorial(Post)

    Created by: Rita Hutchinson   Designer TipsFor step by step instructions on making loops, see: Jewelry Basics 101 (PDF).String beads in random pattern in varying 3 to 5" lengths on beading ...

    Artemis Christmas Tree Earrings Tutorial(Post)

    A jewelry project from Rings & Things, based on a holiday earrings design from CREATE YOUR STYLE. Created by: Rita Hutchinson.Designer TipsFill the large end of the artemis bead with the 8mm puff ...

    Sunny Day Skull Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCreate skull dangles and outer-circle Size 6 E bead dangles with headpins, corrugated beads, and seed beads.For step-by-step direction on making head pin loops ...

    Spanish Rose Earrings Tutorial(Post)

    3mm and 4mm gemstone beads have notoriously small holes, so they rarely work with standard-diameter head pins. We highly recommend wrapped loops rather than simple loops, with the thinner-gauge wire ...

    Crystal Angel Earrings Tutorial(Post)

    Designer TipsAdd a cone bead (wide side first) to a head pin. Next add a wing bead, round crystal bead, and the rhinestone wheel bead (halo).Make a simple loop at the top of the head pin. For best wa ...

    Wedding Doves Necklace and Earring Tutorial(Post)

    Created by: Rings & Things StaffDesigner TipsThis symmetrically designed necklace has a finished length of 17". For a different length, adjust the amount of beads, bead caps and stringing cable a ...

    TierraCast Bee Earrings Tutorial(Post)

    Created by: TierraCast   Designer TipsTwist open loops of niobium earring hooks and feed an open end through the top of each honeycomb charm. Twist closed.Open each jump ring by twisting open an ...

    Sour Patch Bracelet Tutorial(Post)

    Created by: Rita Hutchinson 12mm #4470 Cushion Squares by Swarovski are nearly gone, but these settings also work with most other brands of 12mm cushion squares. Shop remaining colors while they ...

    Gypsy Dancer - Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsColorize the raw brass filigrees. (See Rings & Things blog post "Jewelry DIY - Colorizing Raw Brass Filigrees" for instructions.)Make a bead dangle and atta ...

    Finishing Methods for Bead Stringing(Post)

    Learn popular methods for finishing necklaces and other handmade jewelry with crimps and cord ends, jump rings, split rings, knots and jewelry clasps. This page is a brief overview with links to more ...

    Tahitian DeLite Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsCarefully set prongs over the stones using flat-nose pliers. (Nylon jaw pliers can help prevent chipping or scratching.) For step-by-step instructions, see l ...

    Summer Rain Bracelet Tutorial(Post)

    Created by: Veronica GreenwoodDesigner TipsPlace a wire guard on the round link and crimp a 10-inch piece of flex wire through the wire guard (see Jewelry Basics 101 - PDF).String one each in this or ...

    Simple Silk Swag Men's Magnetic Earrings Tutorial(Post)

    Created by: Laurae SatherDesigner TipsCut the post portion off the rivoli earring finding.File the back until you have an approximately 4-5mm flat spot (about the same diamter as the earring magnet).

    TierraCast Luna Moth Necklace Tutorial(Post)

    Created by: Tracy Proctor of TierraCastDesigner TipsString 8mm gemstone pebble bead and 1 gold spacer onto head pin. Bend wire over at top of spacer and use round nose pliers to form a 1/8" simple lo ...

    Cave Man Necklace Tutorial(Post)

    Created by: Jaci BostonDesigner TipsCarefully plan the cutting pattern. The shape of these cuts creates decorative prongs or tabs to hold the gemstone slab bead.For this design draw the shape to be c ...

    Beachy Panel Bracelet & Earrings Set(Post)

    Created by: Guest Designer Deb FlorosSuggested Supplies 1 #40-090-34-3 Silver Plated Disk & Loop Chain, 7mm by the FOOT1 #05-817-LTU8 PRESTIGE 5817 8mm Crystal Pearl Cabochon Crystal Iridescent ...

    Snowman's Holiday Pearl Earrings Tutorial(Post)

    Add some sparkle and shine to your holiday wardrobe. These snowman earrings are easy and quick to assemble.Created by: Rita Hutchinson.Design by: Swarovski's Create Your Style Design Team Design ...

    Forest of Wine Charms Tutorial(Post)

    Created by: Swarovski's Create Your Style Design TeamDesigner TipsString onto one head pin: 1 - 4mm cube bead, 1 - 10mm #3700,>3700,>3700,>3700, 1 - 8mm #3700,>3700,>3700,>3700, 1 - ...

    Shipping(Page)

    Shipping We ship from Boise, Idaho to all locations in North America and many countries around the world! Most orders leave our warehouse the same day you order. No hidden handling fees! ** COVID ...

Products (40)

Filters
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  •      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Silver Plated Eye Pin, 2", Standard (Pack)

    $9.38
    Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
    Qty in Cart: 0
    Quantity:
    Price:
    $9.38
    Subtotal:
  •      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Yellow Plated Eye Pin, 3", Standard (ounce)

    $6.55
    Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
    Qty in Cart: 0
    Quantity:
    Price:
    $6.55
    Subtotal:
  •      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Gunmetal Eye Pin, 7/8", Standard (Pack)

    $7.01
    Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
    Qty in Cart: 0
    Quantity:
    Price:
    $7.01
    Subtotal:
  •      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Assorted Brass Eye Pins, 2", Standard (ounce)

    $7.10
    Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
    Qty in Cart: 0
    Quantity:
    Price:
    $7.10
    Subtotal:
  •      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Gunmetal Eye Pin, 2", Standard (ounce)

    $9.57
    Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
    Qty in Cart: 0
    Price:
    $9.57
    Subtotal:
  •      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Yellow Plated Eye Pin, 7/8", Standard (ounce)

    $6.48
    Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
    Qty in Cart: 0
    Quantity:
    Price:
    $6.48
    Subtotal:
  •      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Gunmetal Head Pin, 3", Standard (Pack)

    $8.18
    Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
    Qty in Cart: 0
    Quantity:
    Price:
    $8.18
    Subtotal:
  •      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Gunmetal Head Pin, 2", Standard (ounce)

    $11.27
    Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
    Qty in Cart: 0
    Quantity:
    Price:
    $11.27
    Subtotal:
  •      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Yellow Plated Head Pin, 7/8", Standard (ounce)

    $4.28
    Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
    Qty in Cart: 0
    Quantity:
    Price:
    $4.28
    Subtotal:
  •      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Antiqued Pewter Plated Head Pin, 2", Standard (Pack)

    $4.91
    Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
    Qty in Cart: 0
    Quantity:
    Price:
    $4.91
    Subtotal:
  •      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Gunmetal Ball End Head Pin, Standard, 1" (100 Pieces)

    $3.30
    Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
    Qty in Cart: 0
    Quantity:
    Price:
    $3.30
    Subtotal:
  •      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Copper Plated Ball End Head Pin, Standard, 1" (100 Pieces)

    $3.30
    Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
    Qty in Cart: 0
    Quantity:
    Price:
    $3.30
    Subtotal:
  •      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Copper Plated Ball End Head Pin, Standard, 1.5" (100 Pieces)

    $6.34
    Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
    Qty in Cart: 0
    Quantity:
    Price:
    $6.34
    Subtotal:
  •      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Yellow Plated Head Pin, 2-1/2", Standard (Pack)

    $5.28
    Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
    Qty in Cart: 0
    Quantity:
    Price:
    $5.28
    Subtotal:
  •      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Antiqued Copper Plated Head Pin, 2", Standard (ounce)

    $8.39
    Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
    Qty in Cart: 0
    Quantity:
    Price:
    $8.39
    Subtotal:
  •      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Gunmetal Ball End Head Pin, Standard, 1.5" (100 Pieces)

    $9.23
    Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
    Qty in Cart: 0
    Quantity:
    Price:
    $9.23
    Subtotal:
  •      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Antiqued Brass Plated Ball End Head Pin, Standard, 1" (100 Pieces)

    $3.30
    Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
    Qty in Cart: 0
    Quantity:
    Price:
    $3.30
    Subtotal:
  •      Basic Loops         The loop size will depend on how much wire you leave past the  end of your beads, and around which part of your pliers you bend  the loop. A good loop size is usually about 1/3 of the way from the  tip of your pliers, with about 8mm of wire.    Use round needle-nose pliers.    If using an eye pin, decide which way you want the loop to go -  the same direction as the premade loop on the other end, or  90º off. Keep this direction in mind as you bend the rest of  the wire.    Cut off any excess wire (we suggest retaining 8mm above the top  of your beads).    Grip the pin just above the top bead (at the arrow above), and  bend the wire sharply toward you.    Grasp the tip of the wire with pliers, and bend smoothly away  from you, around the pliers.               Wrapped Loops       Use chain-nose pliers to grasp the wire just above the top of  the bead.    Use your fingers to bend the wire sharply over the top of the  pliers, at a 90° angle. You should have 2-3mm of straight wire  between the bead and the bend.    Use round-nose pliers to grasp a spot just above the bend, and  use your fingers to smoothly bend the wire all the way around the  tip of the pliers.    Now use pliers to grasp the wire firmly across the loop. Use  your fingers or chain-nose pliers to carefully wrap the wire around  the stem. For best control, experts recommend you break this step  into a series of half wraps.    Trim excess with flush cutters.                See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

    Antiqued Copper Plated Ball End Head Pin, Standard, 1" (100 Pieces)

    $3.30
    Basic Loops The loop size will depend on how much wire you leave past the end of your beads, and around which part of your pliers you bend the loop. A good loop size is usually about...
    Qty in Cart: 0
    Quantity:
    Price:
    $3.30
    Subtotal:
  • Total: items /

Adding your products to cart