237 results for 'Drills Bits and Hole Punches'

News & Information (237)

Dazzled Double Hole Dagger Bracelet(Post)

Created by: Guest Designer Deb FlorosSuggested Supplies 1 #280-J2D-NP1 CzechMates Glass 16 x 5mm Matte Brown Iris Two-Hole Dagger Bead (50pc Strand)1 #20-115-614 TOHO Glass Seed Bead, Size 15, 1.5mm ...

Two-Hole Rulla Wrap Bracelet Tutorial(Post)

Created by: Amy MickelsonDesigner TipsUse a cloth/soft tape measure to determine the desired number of wraps and the length of bead cable or cord.Double the length of beading cord and add about 6".Cr ...

Tuli Tribal Necklace Tutorial(Post)

Created by: Joe HentgesDesigner TipsThe hole size for these handmade pendants can be variable.Use a drill to enlarge the hole to accommodate a 13-gauge jump ring.Darken the bone inside the enlarged h ...

Silver and Bright Necklace(Post)

Created by: Guest Designer Deb FlorosSuggested Supplies1 #56-216-36-3 Instant Pendant with Screw-On Cone - Silver Color (pack)1 #26-114-3 Silver Plated Metal Beads, 5x5mm Barrel, Large Hole (100 Piec ...

Bermuda Blue Earrings(Post)

Created by: PRESTIGE CrystalSuggested Supplies1 #34-042-0-GM TierraCast Niobium Ear Wires w Round and Heishi Beads, Raw Sterling/ Black (pair)2 #49-958-73-AP TierraCast Antiqued Pewter Plated Jardin ...

Big Bold Pearls as Tassels - Necklace Tutorial(Post)

Created by: Sondra BarringtonDesigner TipsCut approximately 25" of cord, add a pearl, and tie a simple overhand knot at one end. Pull the knot tight, then pull the pearl up against this knot and add ...

Can Can Flowers Bobby Pins Tutorial(Post)

Created by: Toni Plastino   Designer Tips  Cut and flatten aluminum soda cans of your choice. Pick ones with interesting colors and patterns.Cut flower shapes with craft punches.Paint the f ...

Chainmaille-Style Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsThis project has step-by-step illustrated instructions in our blog: How To Make Chainmaille-Style EarringsSuggested Supplies1 ounce (use 8 pieces) #37-178-1 Whi ...

Gear Head Bobby Pin Tutorial(Post)

 Created by: Polly Nobbs-LaRue Designer Tips Always wear safety glasses when cutting, drilling or punching.The bobby pin is a little heavier gauge than recommended for the punch, so us ...

Arrow - Etched Copper Bracelet Tutorial(Post)

Created by: Summer MelaasDesigner TipsOptional: Punch a hole in the corner of the blank, following instructions in hole-punch below. After completing bracelet, dangle a charm or beaded dangle of your ...

Dark Skies Enameled Pendant Tutorial(Post)

Created by: Rita HutchinsonDesigner TipsUse dapping block to shape blank.After dapping, punch 1/16" hole using the smaller (silver) side of a EuroTool "helicopter" punch.Clean blank with penny brite ...

Aja Shamballah Bracelet Tutorial(Post)

Created by: Jaci BostonDesigner TipsWhen choosing a bead, make sure the hole is large enough to accommodate the size cording you choose.Familiarize yourself with square knots.This project requires yo ...

Memory Journal Necklace Tutorial(Post)

Created by: Sondra BarringtonDesigner TipsSee the Create a Hinged Metal Memory Journal blog post for a step-by-step tutorial with images.Texturize or etch* various metal pieces for the journal and pa ...

Passage To India - Coin Earrings Tutorial(Post)

These verdigris coin earrings are a beautiful combination of metal and gemstones, with a hint of sparkle. This beginner project requires only a few basic jewelry-making tools and can be completed qui ...

Metal Stamping 101(Post)

Make your own custom charms, pendants, connectors, tags and more! Metal stamping is not only the latest craze — it's also a lot of fun and gives you design freedom. Plus, handcrafted metal components ...

Swarovski Emerald Eye Necklace Tutorial(Post)

Modified from a design created by Swarovski's Create Your Style Design Team Designer Tips Using the 1.5mm plier punch, or the smaller (silver) side of the 2-hole punch, make 6 holes in ...

Trisha Earrings Tutorial(Post)

If you've never set faceted stones before, tube settings are a great way to get started.Created by: Rita HutchinsonDesigner TipsGolden Topaz is November's birthstone, and sparkling 4mm CZs are availa ...

Sacred Curling Stone Bracelet Tutorial(Post)

Created by: Amy MickelsonDesigner TipsUse 6 wavy disks with the dapping set, to create domed bead caps to fit the rotund trade beads. Flatten the rest with a nylon hammer to create 12mm brass heishi.

Bloodstone Adjustable Macrame Bracelet Tutorial(Post)

Created by: Michelle Horning  Designer TipsFor step by step macramé knotting instructions, see our blog article: DIY Shamballa-Style Macrame Bracelet Tutorial.Beads can be strung onto the b ...

Dapped Love Earrings Tutorial(Post)

Designer TipsStamp "Love" or desired word or pattern on 19mm brass disk, and antique it using Novacan. (See Metal Stamping 101)Punch a hole near the top of both disks using the 1/16" side of the 2-ho ...

Fresh Pots Bracelet Tutorial(Post)

Created by: Jaci BostonDesigner TipsUse silhouettes of multiple teapots and teacups to make this design. No two are alike.Use rubber cement to glue the paper images to the metal.Saw vertically at all ...

Eclipse Cuff Links Tutorial(Post)

Created by: Mollie ValenteDesigner TipsClip the loop off both moon charms, file smooth, and sand with a 600 grit polishing cloth.Use a dapping block to gently dome the moon charms.Soft solder each mo ...

Geometric Chevron Earrings Tutorial(Post)

These geometric, simplistic, edgy metallic long chain earrings feature double spike Swarovski crystals! The attention-grabbing, lightweight earrings look like a million bucks but, they are actually v ...

Moon and Stars Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsDome (or dap) the brass moon charms.Antique the brass moons with WinOx™ and polish with the "Brilliant" polishing cloth.Thread a bicone crystal and fluted bead ...

Fly Bee! Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsPunch 1/16" holes in the bracelet where you want to place the rivets.Run the first rivet through the leather, place a washer on it, and use a fine-point Shar ...

Campfire Skies - Riveted Barrette Tutorial(Post)

TierraCast's shimmering antique bronze leather, a hammer-textured spiral link, and shiny black rivets, combine to create a barrette that's perfect for Spring bonfires and Fall festivals. This securel ...

Riveting 101(Post)

Learn the basics of riveting, including how to distinguish various types of rivets and how to set different rivets. Riveting is a classic, durable and popular way to create cold connections in jewelr ...

Wonder Woman Riveted Cuff Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsThis bracelet is super fast and fun to make, once you have the necessary tools.The Domed Piercing Base allows you to pierce the domed bracelet without leavin ...

Leather Petal Earrings Tutorial(Post)

You may have seen some fun leather earrings cut out in the shape of a petal. Why not take it a step further and add some extra pizazz! Just adding some chain and a couple of crystals gives them a lit ...

Go Fly A Kite Enameled Earrings Tutorial(Post)

Created by: Summer Melaas Designer TipsCarefully mark spots for holes, and use smaller end of EuroTool "helicopter" punch to add holes to corners of copper blanks.Clean the blank with Penny Brit ...

Soar With Me Cuff Bracelet Tutorial(Post)

Created by: Valorie Nygaard-PouzarDesigner TipsPatina, seal and use bracelet-bending pliers to apply a gentle curve to the metal sparrow before riveting it to the leather.For hints on applying Vintaj ...

Red Light / Green Light Enamel Earrings(Post)

Your Choice: They're balloons, streetlights or lollipops!  Created by: Summer Melaas and Polly Nobbs-LaRue   Designer TipsPunch a 1/16" hole in each blank, directly opposite the existing lo ...

Avocado Dorado Cuff Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsSolder Brass Ninja Star* to Copper Disk:If the copper or brass shapes are bent, straighten them with a steel block and nylon or rawhide mallet. (Solder doesn ...

The North Star Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCreate a bail using a 5/16" x 3" piece of 24-gauge copper sheet: Cut, file, stamp, punch and ream the holes a bit larger. Use bail-making pliers to bend the sta ...

Gemstone Chakra Bracelet Tutorial(Post)

Created by: Michelle HorningDesigner TipsCut a length of stretchy cord about 6" longer than you'll need for the finished bracelet, to make it easy to tie the finishing knot. Double the cord if double ...

Tough Girl Rhinestone Chain and Leather Bracelet Tutorial(Post)

Created by: Rita Hutchinson   Designer Tips  Measure your rhinestone chain pieces to the same length for best results.Use an awl to pierce holes in the leather, and sew the chain to the cuf ...

Gemstone Index: Peridot(Post)

This olivine variety is composed of magnesium iron silicate. Peridot (pronounced PEAR-ih-doh or PEAR-ih-dot) is created under great temperatures and pressures deep within the Earth, and sometimes is ...

99 Luftballons Tutorial(Post)

ok, so maybe it's just 2 Red Balloons, not 99...Created by: Summer Melaas and Polly Nobbs-LaRue   Designer TipsPunch a 1/16" hole in each blank, directly opposite the existing loop or hole.Clean ...

Rough Around The Edges Hoop Earrings Tutorial(Post)

A drawplate is excellent for hardening soft wire without making it brittle, so custom ear wires and handmade hoops are springy and keep their shape.Created by: Rita HutchinsonDesigner TipsCut a lengt ...

Night Reflections Enamel Earrings Tutorial(Post)

Created by: Summer MelaasDesigner TipsUse the smaller end of the 2-hole metal punch to punch a 1/16" hole near the top of the blanks. Be sure to center it, so the earrings hang properly.Clean the bla ...

Extra Briolicious Necklace Tutorial(Post)

These sparkling, shimmering beads are beautiful and easy to use. This doesn't really count as a tutorial... really I just bought one of each color and strung them on a sleek black choker. I can trade ...

In the Moment Leather Cuff Bracelet Tutorial(Post)

Created by: Mollie Valente   Designer TipsCustomize the word blank:Place the word blank on the steel block and create a dappled texture with the ball peen side of the chasing hammer.Use the brac ...

Pawrific Enamel Necklace Tutorial(Post)

Created by: Summer MelaasDesigner TipsPunch a hole in the top corners of your copper blank. File any sharp bits.Clean your blank very well with warm water and Penny Brite.Cut your 22 ga bare copper w ...

Silver Sea Urchin Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer Tips Memory wire is steel, and unkind to most jewelry tools.Use heavy-duty flush cutters to cut the desired length: Most memory wire bracelets are 3-5 ...

Cognitive Resonance Pendant Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsWhen scouring yard sales and 2nd-hand stores for old watches, try to pick up a wide variety of brands and eras, for the best variety of gears. Or look ...

Fold-Formed Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsJewelry Lab: 52 Experiments, Investigations and Explorations in Metal has a great tutorial on fold forming. Plus of course, Charles Lewton-Brain's book Foldf ...

Sweet Penmanship Pen Tutorial(Post)

Created by: Toni PlastinoDesigner TipsNo tools needed!Simply unscrew the top of the pen, add the desired large-hole beads of your choice and screw the top back on!This pen is designed for artisan bea ...

Enameled Yellow Submarine Tutorial(Post)

2018 was the 50th Anniversary of the Beatles' Yellow Submarine! Create your own yellow submarine using bright opaque vitreous (glass) enamels on copper sheet.  Created by: Polly Nobbs-LaRue &nbs ...

Copper & Purple Love - Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner Tips Set link on leather bracelet, and use a sharp pencil, or fine-point non-smudging marker, to make a dot at each spot to punch.Rotate leather hole punch to s ...

Breathe - Riveted Leather Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsSet link on leather bracelet, and use a sharp pencil, or fine-point non-smudging marker, to make a dot at each spot to punch.Rotate leather hole punch to sma ...

Pop of Color Enamel Earrings Tutorial(Post)

Created by: Summer MelaasNote: We've had great success enameling our 24-gauge brass blanks, but for the most consistent color results, this enamel is best with copper blanks. Designer TipsTexture the ...

Bee Keeper Reliquary Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFor a step-by-step tutorial with images, check out the How to Create a Reliquary Pendant blog post.Cut and shape the blank: Measure and cut a brass blank 1 x 1- ...

Upcycled Cog Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsWhenever walking, watch for unusual/interesting metal objects on the ground! When they are an unknown metal, do not try antiquing them or punching holes with ...

Sweeter Than Honey Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFirst make a chain using 8mm jump rings and large-hole beads:Twist open a jump ring and string it through a large-hole bead and then close the jump ring.Open a ...

Tri-Tone Cuff Bracelet Tutorial(Post)

Created by: Rita Hutchinson   Designer TipsUsing a pre-cut and finished bracelet blank, and precut 6" patterned wire makes this bracelet assemble in a snap!Apply pattern to copper blank with des ...

Custom Anniversary Bracelet Tutorial(Post)

Learn how to make a leather anniversary bracelet using porcelain number beads to "spell out" a custom anniversary date (7/7/90).Created by: Polly Nobbs-LaRueDesigner TipsUse a finished leather bracel ...

Spiral Lagoon Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsPlace the TierraCast® link on the bracelet in desired location, and use a fine-point Sharpie® (or other extra black permanent marker) to mark where to punch ...

Busy Bee Earring Tutorial(Post)

Created by: Tiffany WhiteDesigner TipsTape the stamping blanks to the steel block. Use a permanent marker to draw lines where you want to stamp the phrase "BUSY BEE".When stamping, make sure that eac ...

Paisley Palette Pin Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsFor best placement of the holes, make a template: Trace the outline of the paisley on a piece of paper (a Post-it® works great!), then use a pencil to sketc ...

A Mustache For Your Wrist Cuff Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsAdjust bracelet to target wrist size/shape, because once the 2nd layer is riveted on, you will have limited adjustability.Texture or stamp the bracelet and/o ...

2 Easy Celtic Knot Bracelets Tutorial(Post)

These bracelets are almost too easy!  Created by: Polly Nobbs-LaRueDesigner TipsSet the TierraCast Rivetable or Link in the center of the leather bracelet and use a fine-point permanent mar ...

Alpine Flower SuperDuo Earring Tutorial(Post)

Created by: Amy MickelsonDesigner TipsThread needle onto comfortable length (36-48”) of bead cord and condition. Depending on the type of cording you choose, you may want to double it.Add 12 beads to ...

Good Thoughts Barrette Tutorial(Post)

Created by: Polly Nobbs-LaRue Designer TipsThe original alligator clip used for this barrette is no longer available, but our new French-style barrette backs are more secure (hold better in hair) and ...

Lampwork Glass BeadPen Tutorial(Post)

Created by: Dee MuellerDesigner TipsNo tools needed!Simply unscrew the top of the pen, add the desired large-hole beads of your choice and screw the top back on!This pen is designed for artisan beads ...

Stella, A Night on the Town Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRue   Designer TipsString desired pattern of spikes onto the Vintaj® Creative Hoop.Gently bend hoop so the holes are aligned tightly together.Select a medium-sized jump ...

Fidget - Hinged Book Pin Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsRead the instructions included with the rivet piercing/setting tool (#69-900>69-900). Also check out the instructional video for more information on using ...

Earth Day Hemp Macrame Bracelet Tutorial(Post)

One 8" strand of 8mm large-hole gemstone beads is enough to make 3 bracelets just like this. In case dumortierite is out of stock, more gemstone ideas are linked below.Created by: Michelle HorningDes ...

Hydrangea Blossom Necklace Tutorial(Post)

Created by: Mollie Valente Designer TipsOpen the chain necklace's clasp.Thread the jump-ring side of the chain necklace through the side-to-side holes in each pearl ball bead, one bead at a time ...

Witchy Earrings Tutorial(Post)

Created by: Jaci BostonDesigner TipsKeep the saw blade well lubricated to create ease while sawing.To avoid breaking your blades, keep the saw upright, without tilting, while you're sawing.For perfec ...

Belle Starr Leather and Turquoise Bracelet Tutorial(Post)

  Created by: Mollie Valente   Designer TipsStart with extra leather and thread, cutting off any excess is better than not having enough.For security, add additional stitches on the first a ...

Let it Snow Stamped Necklace Tutorial(Post)

Created by: Cindy MorrisDesigner TipsCut 24-gauge sterling sheet into a 1" to 1.5" square. (Cindy's is about 1.25" or 32mm)Use a file to smooth the edges and round the corners.Create the stamped meta ...

Pulse Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsDetermine placement of vinyl heishi beads, and mark each dot with an extra-fine point Sharpie®.Punch holes in the brass blanks with the cutting end of the Cr ...

Sun Valley Earrings Tutorial(Post)

Created by: Mollie ValenteDesigner TipsMeasure and mark the hanging hole placement near the upper corners of the half-round blanks. These should be set back from the edge about 1/16".Use the hole pun ...

Rustic & Fabulous Stretch Bracelets (Post)

Created by: Guest Designer Deb FlorosSuggested Supplies 1 #26-840-36-AC Antique Copper Plated Shallow Bead Cap, 4.2mm - Special Purchase (strand)1 #1-625-5023/s Faceted Crow Beads 6 x 4mm (2.5mm hol ...

Little Sprout Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsFor step-by-step illustrated instructions showing how to engrave the pendant, see Rings & Things blog post "Jewelry Making DIY – Make a Micro Engraved Penda ...

Cities in Bloom Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsUse a permanent marker to draw a few clouds in the sky, and tufts of grass on the ground. (After etching, I thought my tufts of grass looked more like a city ...

Tschinkel's Circles Bracelet Tutorial(Post)

Created by: Polly Nobbs-LaRueDesigner TipsLay out a pattern on the blank bracelet. Free-hand, or using a ruler, mark each spot using an awl or an extra-fine point marker. (The heishi beads pictured a ...

Squidly Necklace Tutorial(Post)

Created by: Jaci BostonDesigner TipsPunch holes in desired locations (click into hole-punch details for usage instructions for this tool).Use ring bending pliers to make the brass blanks wavy.Use 3mm ...

Fireblossom Earrings Tutorial(Post)

Created by: Rita Hutchinson  Designer Tips Determine desired loop lengths and cut leather. For these earring, I cut 2 pieces at about 5" and 2 pieces at about 3".String large-hole gemstone on ...

Patterned Wire Earrings Tutorial(Post)

Created by: Polly Nobbs-LaRue   Designer TipsMeasure, mark and cut patterned wire to desired length.File ends smooth with slightly rounded corners, so the wire pieces match the curve of the disk ...

Men's Cross Bracelet Tutorial(Post)

Created by: Valorie Nygaard-PouzarDesigner TipsCut the leather at an angle to assist in fitting two ends through the hole of the cross connector. For a better grip on the end of the leather, consider ...

Witchy Necklace Tutorial(Post)

Created by: Jaci BostonDesigner TipsKeep the saw blade well lubricated to create ease while sawing.To avoid breaking your blades, keep the saw upright, without tilting, while you're sawing.For perfec ...

Summer Blues Earrings Tutorial(Post)

Design by Create Your Style team at Swarovski North America.Although these weren't designed with September in mind, the colors are perfect for September birthstone jewelry.Designer TipsAdd one 4mm li ...

The Grass is Always Greener Ring Tutorial(Post)

Created by: Mollie ValenteDesigner TipsCut the glass to fit the bezel and wet sand to smooth the edges.Clean the glass and ring with rubbing alcohol and glue with two-part epoxy.Place the ring on a l ...

Corralled Pearls Necklace Tutorial(Post)

For their safety and your health, pearls and shells should always be drilled, reamed, etc underwater.Created by: Rita HutchinsonDesigner TipsCut a small piece of leather to test the hole sizes as you ...

Sandra Leather Bracelet Tutorial(Post)

Created by: Rita Hutchinson   Designer TipsSqueeze out a few drops of patina (or your favorite metallic acrylic paint) on the craft sheet. Apply patina to the edges of the cuff, and then dry-bru ...

Triple the Fun Bracelet Tutorial(Post)

Created by: Swarovski's Create Your Style Design TeamDesigner TipsUsing alcohol wipes, clean both Palace Crimp Ends on the inside.Using the black suede lace, make a double overhand knot in the center ...

Easy Pearl Lariat Tutorial(Post)

Created by: Rita Hutchinson Just 3 parts total: leather cord, leather-hole pearls, and a link about the size of a quarter (around 25mm). Choose from a wide variety of link options in sterling silver ...

Camping Out Necklace Tutorial(Post)

Created by: Rita Hutchinson Designer TipsCut 3 lengths of deer hide (I used 9" pieces). Fold each length in half and tie each to the acetate ring with a larks-head knot.Add large-hole "Toasted M ...

Industrial Ease Earrings Tutorial(Post)

Large-hole Pyrite Heishi and 14-gauge iron color Artistic Wire make these industrial-looking earrings a breeze to create.Created by: Rita HutchinsonDesigner TipsCoil wire around largest portion of wr ...

Embellished Mixed Metal Dog Tag Necklace (Post)

Created by: Guest Designer Deb FlorosSuggested Supplies 2 #40-080-01-32-9 Gunmetal Plated Steel Ball Chain, 3.2mm By The FOOT (foot)1 #40-803-6 Antiqued Brass Plated Ball Chain Clasp, 3.2mm (100 Pie ...

Starry Night - Constellation Jewelry(Post)

Created by: Summer MelaasSo many options for Constellation necklaces!Pick your favorite blank (something thick, like 16-gauge).Find a constellation that you like. For a good star map, search the web, ...

TierraCast Nesting Bracelet Tutorial(Post)

Design by: Katie Hill (TierraCast)Designer TipsTIP: Don’t stretch the cords when knotting. Tie with cord relaxed, but with extra slack taken up.Cut three 12" strands of elastic cord. Pull on the ends ...

Go West Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsMaking the Pendant:Cut the handle loop of the heart charm and file smooth.Mark hole locations with a Sharpie®, and use the hole punch to make two 1/16th-inch ha ...

Winter in Bermuda Bracelet Tutorial(Post)

Created by: Amy MickelsonDesigner TipsRoughen the pads on the disk and loop bracelet with sandpaper or a sanding sponge. This increases the surface texture to help the glue adhere.If desired, plan yo ...

Good Fortune Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsAssemble the bead-adorned pendant:Fold the 18" piece of waxed cotton cord in half. String the cord ends through the Dragon Coin Pendant loop, then form a Lark's ...

Planet Earth Earrings Tutorial(Post)

Although we no longer have the exact green beads that were used in the original project, we've kept this project in our gallery for 2 reasons: We love Earth Day, and we also think this is a fun atypi ...

Gianni's Garden Necklace Tutorial(Post)

Created by: Mollie ValenteDesigner TipsMeasure, mark and punch the hanging holes: 3 holes spaced to match the loops of the triangle, and one hole on the bottom.Use a rubber stamp of your choice and t ...

River Blossom Bracelet Tutorial(Post)

Create this project using large-hole gemstone beads of your choice, 1mm cotton or leather cord, and your favorite button as the clasp.Created by: Rita HutchinsonDesigner TipsCut cording and fold in h ...

Wholesale Registration(Page)

Rings & Things welcomes everyone to shop for high-quality, low-priced jewelry making supplies! Wholesale Program prices are only visible when logged into an approved account. If you have a ...