Epoxy Glues - Epoxy glues are durable and long-lasting, but require mixing, and have a limited "set" time, ranging from 1 minute to 2 hours. Because of its sometimes toxic (and generally offensive) fumes, care should be used with this type of adhesive.
Cyanoacrylate - Also known as CA, SuperGlue® or Krazy Glue. This glue has become increasingly popular in the last 10 years, and has many advantages. It has a set time ranging from 2 seconds to around 2 minutes. Extreme care should be used with this product as you may become permanently attached to your current project. This adhesive works best on surfaces that fit exactly together, rather then trying to fill a gap. This glue is also great for securing beads, findings or knots to SuppleMax.
Specialty Glues - This is the catchall group, and includes rubber cement, contact cement, mucilage, spray adhesive, general household cement, Crafter's Pick glues and a product called E6000. Most of these are very task specific, and are not well suited for general construction. E6000 is rather unique adhesive. It has a wide range of uses including gluing rubber. It is extremely slow to set (around 24 hours) but if the time is not a major concern, this glue is excellent for gluing plastics. Crafter's Pick glues are common white glues that dry clear and are washable. Great for use on fabrics.
Glues and Cold Temperatures
Avoid having glues shipped to you via ground during winter months. Although adhesives generally maintain a longer shelf life if kept cool, many of them lose their effectiveness once they become frozen. This is especially true of super glues (cyanoacrylate glues).
Cyanoacrylate (super glue) bonds can be weakened, allowing disassembly, by placing a glued object in a household freezer for several hours.
Epoxy glues also become brittle in low temperatures, but most will not snap apart the way super glues do.
For the above reasons, make sure you store your finished creations somewhere that maintains temperatures above freezing.
Gluing Hints for Metal Findings
Remember Murphy's Law! Before gluing or otherwise applying any chemical to every piece of your best customer's 1,000-piece order, we strongly recommend that you test the chemical(s) on a small sample of the goods.
Whenever possible, use a file to roughen smooth surfaces. This gives a stronger grip.
Clean both surfaces to be joined. We recommend using isopropyl alcohol and a cotton swab in a well-ventilated area.
Why is it important to clean the surfaces? During the manufacturing process, metal findings are coated with oil. They are degreased, but normally still have a small amount of oil left on the surface.
Follow each adhesive's directions carefully when using.
It's best if you can provide a dry, dust-free, well-ventilated environment when gluing. This helps assure a secure bond. Extreme temperatures might affect the drying time.
Store all adhesives in a cool place.
MSDS (Material Safety and Data Sheets)are available upon request for all glues that we sell.
7mm white plated disk and 6.5mm loop bulk jewelry chain for gluing, approximately 5-meter (16.4 feet) rolls. Steel. White plating is typically an imitation rhodium finish. With glue or solder, attach fused glass, buttons, polymer clay, laminated paper art, charms or anything else you can think of! #39-210 fold-over clasps work great with this chain. Occasionally, the plastic spool is damaged in shipping. This should not affect the usability of the chain.