Use a paper towel and ispropyl alcohol to clean the glass tile. This will remove contaminates and ensure that the adhesive will hold.
With a small paint brush, apply an even layer of adhesive to the image side of the paper cutout. Center the glass tile over the adhesive-coated image and apply pressure to remove air bubbles.
Place the glass piece face-down on and set aside in a warm place to dry. Image will be temporarily cloudy, but adhesive will turn clear once dry.
Apply an even coat of the "Ultimate Adhesive" to the back side of the image tile and position centered on the smooth side of the glue-on pin finding. Pay close attention to the pin direction and the image direction so they coincide.
Apply even pressure to remove trapped air bubbles.
Set the pin aside in a warm place to dry. Allow a full 24-hour for the adhesive to cure, then your pin will be ready to wear.