null

615 results for '6 1mm O D 4mm I D 18 Gauge Enameled Copper Jump Rings'

Suggestions:

Categories

News & Information (615)

    Jump Ring Hint(Post)

    When you open and close jump rings, twist ends instead of "ovaling" them.This keeps their round shape better, which makes them easier to close neatly and securely.Many people find it easier to grip j ...

    Jet Scarab Copper Ring Tutorial(Post)

    Depending on the beads you use, this quick and easy unisex design can go from frilly and feminine to macho and masculine.  Created by: Michelle Horning   Designer TipsFor step-by-step instr ...

    Go Round-and-Round Enameled-Copper Earrings Tutorial(Post)

    Created by: Mollie Valente Designer TipsMake two enameled copper washers. You can either use the enamel colors of your choice, or the colors listed in the suggested materials. Follow instruction ...

    5 Minute Rings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsCut a 20-gauge or 24-gauge 0.25" (wide) strip of copper, brass or sterling sheet approximately 2.75" long.Smooth and straighten with a nylon hammer.Optional: ...

    Copper Sands Earrings Tutorial(Post)

    Created by: Tiffany White Designer TipsOne meter of this chain will make approximately 9-10 pairs of earrings!Place all the crystals onto the head pins and secure with wrapped loops. (New to jew ...

    Enameled Orchid Eye Tutorial(Post)

    Created by: Mollie Valente Make your Enamel DiskUse the dapping set to dome the copper blank. (See Rings & Things blog post: How to Dap and Dome Metal Jewelry.)Fire the concave (back side) o ...

    Enameled Yellow Submarine Tutorial(Post)

    2018 was the 50th Anniversary of the Beatles' Yellow Submarine! Create your own yellow submarine using bright opaque vitreous (glass) enamels on copper sheet.  Created by: Polly Nobbs-LaRue &nbs ...

    Ring Around the Rosies Earring Tutorial(Post)

    The TierraCast Dulce Vida rings are reversible, with a different design on each side. If you wish the earrings to match, face the rings in the same direction during assembly.Created by: Rita Hutchins ...

    Geared Ring Tutorial(Post)

     Created by: Polly Nobbs-LaRue Designer TipsCut a strip of 20-gauge sheet 2.75" long. Smooth and straighten with a nylon hammer.Optional: Texture or stamp (see "How to Make a Metal-Stamped ...

    Delightfully Dotty Enameled Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCut copper sheet to size or use a premade copper blank. If you have cut your own blank, punch hole in appropriate location and file edges to remove roughness.C ...

    Enameled Hidden Heart Tutorial(Post)

    Created by: Mollie ValenteMake your Enamel DiskUse the dapping set to dome the copper blank.(See Rings & Things blog post: How to Dap and Dome Metal Jewelry.)Fire the concave (back side) of the c ...

    Sun Tea Enameled Pendant Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsClean the blank with Penny Brite per package instructions. Rinse thoroughly and avoid touching further.Spray klyr fire onto blank, and sift on a base coat of w ...

    Dark Skies Enameled Pendant Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsUse dapping block to shape blank.After dapping, punch 1/16" hole using the smaller (silver) side of a EuroTool "helicopter" punch.Clean blank with penny brite ...

    Bowl of Peaches Earrings - Tutorial(Post)

    Learn to make sweet earrings with a dapped set of disks in sterling and copper. A tumbler REALLY gets these domed disks shiny! They are reflecting so much light back, that the Rose Peach crystals loo ...

    Swirly Hammered Wire Rings Tutorial(Post)

    Created by: Michelle HorningDesigner TipsSee Rustic Wire Ring blog article for illustrated step-by-step instructions for making this style of ring.Hide the cut ends of the finer gauge of wire, on the ...

    Captured Aventurine Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Coil the wire around a 14- ...

    Double Wrap Hammered Rings Tutorial(Post)

    Depending on the beads you use, this quick and easy unisex design can go from frilly and feminine to macho and masculine.Created by: Michelle HorningDesigner TipsFor step-by-step instructions, see th ...

    Unfurled Copper and Oval Gemstone Necklace Tutorial(Post)

    Created by: Cindy MorrisDesigner TipsSince the gemstones are fairly heavy, use two crimp beads for extra security. Flatten crimps with flat-nose pliers.Use two jump rings for the "S" hook to connect ...

    Sparkle Motion Gypsy Ring Tutorial(Post)

    Created by: Laurel NewnhamWe no longer carry the 3-loop ring blank in silver plate, but we do still have some in gold plate, so we've linked the parts for a gold version of this ring as well as silve ...

    Go Fly A Kite Enameled Earrings Tutorial(Post)

    Created by: Summer Melaas Designer TipsCarefully mark spots for holes, and use smaller end of EuroTool "helicopter" punch to add holes to corners of copper blanks.Clean the blank with Penny Brit ...

    Red Bird Enameled Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsPosition and emboss pattern on blanks with the Big Shot Jewelry Studio and embossing die. (See Big Shot Embossing blog article)Counter-enamel the blank (fire t ...

    Arrow - Etched Copper Bracelet Tutorial(Post)

    Created by: Summer MelaasDesigner TipsOptional: Punch a hole in the corner of the blank, following instructions in hole-punch below. After completing bracelet, dangle a charm or beaded dangle of your ...

    Chainmaille-Style Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsThis project has step-by-step illustrated instructions in our blog: How To Make Chainmaille-Style EarringsSuggested Supplies1 ounce (use 8 pieces) #37-178-1 Whi ...

    Titanium Octagon Key Ring Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsThese flat-wire octagonal titanium key rings have a nice look and feel, and the octagon Swarovski Strass crystal continues the geometry. (If you it's crazy t ...

    Feathered Fabulous Dangly Earrings(Post)

    Created by: Guest Designer Deb FlorosSuggested Supplies1 #44-153-9 17x25mm Gunmetal Triangle Filigree (12 Pieces)6 #44-940-81-GM TierraCast Black Gunmetal Plated Small Feather Charm (Each)1 #34-061-1 ...

    Astral Love Resin Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsSee instruction page for making no-solder bezels.Cut paper to match bezel wire shape.Seal paper and adhere to inside of bezel.Mix a small batch of resin and po ...

    An Ode to Ojo Earrings Tutorial(Post)

    Created by: Lindsey GreenDesigner TipsBrushing steel wool lightly over the copper blanks gives them a nice shine and textured look.Free Technique Sheets & How-TosBasic Jewelry-Making Technique Sh ...

    GO TEAM! Seahawks Colors Key Ring(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsAdd a jump ring to the football charm. For best way to open and close loops, see Jump Ring Hint in Jewelry Basics 101 (PDF)Slide the team color charms and th ...

    Leather Petal Earrings Tutorial(Post)

    You may have seen some fun leather earrings cut out in the shape of a petal. Why not take it a step further and add some extra pizazz! Just adding some chain and a couple of crystals gives them a lit ...

    Fashion and Function Pin Cushion Ring Tutorial(Post)

    Created by: Amy Mickelson Designer TipsCreate a cardboard template 2.5 times the diameter of the bezel (approximately 2.25" for this ring).Using a doubled 36" piece of sewing thread, knotted at ...

    Fit for a Queen Ring Tutorial(Post)

    This simple project features crystal rivoli stones and 1-time adjustable ring blanks with a bezel setting. Created by: Amy Mickelson Steps to Make These RingsWhile most colors of Swarovski ...

    Simple Elegance Earrings Tutorial(Post)

    Created by: Summer Melaas   Designer TipsOpen loop at bottom of ear wire. For best way to open and close loops, see Jump Ring Hint in Jewelry Basics 101 (PDF),Slide one connector onto the ear wi ...

    Dumortierite and Copper Coin Necklace Tutorial(Post)

    Created by: Dee MuellerDesigner TipsCreate bead connectors with the 8mm rondelles and 14mm faceted round beads.Cut eight 1" pieces of chain. With jump rings attach two pieces of chain to each of six ...

    Wickedly Simple Wire Wrapped Ring Tutorial(Post)

    Created by: Michelle HorningDesigner TipsFor step-by-step instructions -- with detailed photographs -- for making wickedly simple wire-wrapped rings with beads and 22-gauge wire, see our tutorial at ...

    Boho Barbie Earrings Tutorial(Post)

    Created by: Laurel NewnhamDesigner TipsCut wire into two 16" lengths, one for each earring. Trim excess as needed.Hold wire tightly to create loops that are closer together.Experiment with the positi ...

    Christmas Cluster Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsWire wrap all the metal, pearl and crystal beads before assembling.For each earring, Rita used 18 - 4mm crystal bicones in mixed reds, greens and whites, 6 - 3 ...

    Purple Pillow Ring Tutorial(Post)

    Created by: Rita Hutchinson  Designer TipsUse the ring as a template to cut the image or decorative paper to the correct size.Seal front and back of the image with a waterproof barrier before ap ...

    Candara Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRue   Designer Tips  Unspool approximately 26" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Use ring-be ...

    Passage To India - Coin Earrings Tutorial(Post)

    These verdigris coin earrings are a beautiful combination of metal and gemstones, with a hint of sparkle. This beginner project requires only a few basic jewelry-making tools and can be completed qui ...

    BeDazzled Slinky Bracelet Tutorial(Post)

    Created by: Sondra BarringtonDesigner TipsUse 7 coils of anklet size to make this bracelet bangle. You can adjust the size of wire and numbers of coils any way you wish.Do not use your favorite jewel ...

    Tangerine Ring Tutorial(Post)

    Created by: Veronica GreenwoodDesigner TipsPlace the 12mm rivoli in the bezel setting.Using the nylon-jaw pliers, gently push the prongs down over the crystal, starting with the top left prong, next ...

    Aqua Love Necklace Tutorial(Post)

    Created by: Cindy MorrisDesigner TipsString necklace and finish ends following directions in Beading Cable How-To Sheet below. Use Wire Guardians for a professional finish at the ends of yo ...

    The North Star Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsCreate a bail using a 5/16" x 3" piece of 24-gauge copper sheet: Cut, file, stamp, punch and ream the holes a bit larger. Use bail-making pliers to bend the sta ...

    TierraCast Succulent Tassel Earrings Tutorial(Post)

    Created by: TierraCastDesigner TipsMeasure 48" of 1mm cotton cord and cut into 2, 24" pieces. Wrap around fingers 5 times and tuck top of wrap into cord end. Secure with glue or crimping.Twist each o ...

    Matte Satin Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsStart with plenty of 26-gauge wire, and anchor wire to one side of arc connector. Add 4mm beads and extra lashes between each bead. Finish off the end with add ...

    Northern Copperhead Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Make 6 equal sized coils u ...

    Classic Bridal Earrings Tutorial(Post)

    Created by: Summer MelaasDesigner TipsAttach ear wire to top loop of filigree. For best way to open and close loops, see Jump Ring Hint in Jewelry Basics 101 (PDF).Use jump rings to attach the pear p ...

    A Ring A Day...(Post)

    A ring a day keeps the doctor away: Chase the winter blues away with this trio of tropical colored rings!Designer TipsUsing the ring finding, place one fancy stone inside setting. Using nylon-jaw pli ...

    99 Luftballons Tutorial(Post)

    ok, so maybe it's just 2 Red Balloons, not 99...Created by: Summer Melaas and Polly Nobbs-LaRue   Designer TipsPunch a 1/16" hole in each blank, directly opposite the existing loop or hole.Clean ...

    Golden Halos Earrings Tutorial(Post)

    Due to the popularity of 10mm cushion square settings, we've included links to alternate styles below in case the primary setting used in the Golden Halos earrings is temporarily unavailable.  C ...

    Herbaceous Polymer Ring Tutorial(Post)

    Created by: Jaci Boston Designer Tips Wash your hands thoroughly before handling the clay, since polymer clay tends to pick up any dirt and dander that may be hiding.Use a pasta machine to ...

    The Grass is Always Greener Ring Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsCut the glass to fit the bezel and wet sand to smooth the edges.Clean the glass and ring with rubbing alcohol and glue with two-part epoxy.Place the ring on a l ...

    Tamed Urchin Ring Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCenter the stone in the ring setting and gently squeeze in prongs (with your hands or pliers) working from opposite sides to keep the stone centered. Once the ...

    Independence Day Fireworks Earrings Tutorial(Post)

    Mix & match your favorite shades of red, white and blue -- we used Siam, Light Siam, Alabaster, Opal, Sapphire and Capri, but linked in a few other shades below as well.Created by: Polly Nobbs-La ...

    Chasing the Golden Moon Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCut 2 lengths of wire, each about 30" long. You want enough to lash all the crystals, but not so much that the wire is in the way.Anchor 26-gauge wire to the h ...

    Silver Spray Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsWhen making a large number of beaded dangles, it is quickest to do them assembly line style. Figure out the correct length for the wire, and trim all wires, st ...

    Gianni's Garden Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsMeasure, mark and punch the hanging holes: 3 holes spaced to match the loops of the triangle, and one hole on the bottom.Use a rubber stamp of your choice and t ...

    Copper & Purple Love - Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner Tips Set link on leather bracelet, and use a sharp pencil, or fine-point non-smudging marker, to make a dot at each spot to punch.Rotate leather hole punch to s ...

    La Terre Threader Earrings Tutorial(Post)

    Created by: Summer Melaas Designer TipsOpen a jump ring.New to jewelry-making? See Basic Jewelry-Making Technique Sheet (PDF) for most secure way to open and close jump rings.Add an opal charm to the ...

    Autumn Waterfall Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRue   Designer Tips3 sunny shades of orange crystal bicones cascade in a warm ombre waterfall, from Vintaj hammered brass rings.Make wire-wrapped loops using ball-end h ...

    Dragonfly Drop Earrings(Post)

    Created by: PRESTIGE CrystalSuggested Supplies 1 #37-295-460 Sterling Silver Jump Ring, Round - 6mm, 20.5-gauge (10 Pieces)1 #34-569-04 TierraCast Sterling Silver Earring Hook with 2mm Bead (pair)1 ...

    Metal Etching 101(Post)

    Etching is a method of using chemicals to cut a design or pattern into a metal surface. Etching your own designs into metal is easier than it may sound, and it can be a fun and rewarding way to make ...

    A Whale of a Tail Necklace Tutorial(Post)

    Created by: Veronica Greenwood   Designer TipsCut three equal lengths of waxed cord (make sure to cut enough cord for the knotting).Fold all three cords in half and slide your pendant to the cen ...

    Spanish Rose Earrings Tutorial(Post)

    3mm and 4mm gemstone beads have notoriously small holes, so they rarely work with standard-diameter head pins. We highly recommend wrapped loops rather than simple loops, with the thinner-gauge wire ...

    Southwest Chandelier Earrings Tutorial(Post)

    Created by: Rita Hutchinson. Designer TipsWhen you trim the eye pins on the 3 bead sections, retain two of the pieces to use for the shorter 2 bead section instead of using another whole eye pin.Open ...

    Lady-Leg Etched Earrings Tutorial(Post)

    These fun etched copper earrings were cut out with shears (a jeweler's saw would also work great) and then the resist was hand-drawn with Sharpie, in the patterns of toes and thigh-high stockings.Cre ...

    I Love My Cat Bracelet Tutorial(Post)

    Created by: Tracy Proctor of TierraCastDesigner TipsPre-stretch cord by pulling firmly from both ends a few times.Attach small binder clip or bead stopper 2-3” from one end of stretch cord.On other e ...

    Twisted, Not Tangled, Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsThis 24.5"" necklace uses 26 twisty bar connectors. Adjust the finished length of the piece by adding or subtracting connectors.Connect all components together ...

    Infinite Path Earrings Tutorial(Post)

    Created by: Kameron FoxDesigner TipsThese earrings and matching bracelet were created using the step by step instructions on page 92 ofBeautiful Wire Jewelry for Beaders: Creative Wirework Projects f ...

    Falling Snow Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsBlue Shade crystal snowflakes are coated on one side. Check the pendants carefully to hang both crystals in the same direction.Due to the thickness of the crys ...

    Poppy Field Pendant Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsSelect and clean two matching glass pieces.Select an image and cut it to match the glass shape and size.Carefully wrap the glass with copper-foil tape. To creat ...

    Tiny Dancer Earrings Tutorial(Post)

    Created by: Valorie Nygaard-PouzarDesigner TipsMake a pile of crystal dangles with head pins and crystal beads - as many as you feel like making. For these earrings I made 12 dangles for each earring ...

    Threads of September - Earrings Tutorial(Post)

    Channel-set Cubic Zirconia charms make it easy to create elegant linear jewelry. However, most colors and sizes (other than basic diamond clear) are out of production... get them while you can!Create ...

    Trisha Earrings Tutorial(Post)

    If you've never set faceted stones before, tube settings are a great way to get started.Created by: Rita HutchinsonDesigner TipsGolden Topaz is November's birthstone, and sparkling 4mm CZs are availa ...

    Floral Intuition Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCreate wire wrapped link with Cacoxenite and Filigree Beads to attach Blossom charm to the shank of the button. New to jewelry-making? See Jewelry Basics 101 ( ...

    Kilauea Nights Earring Tutorial(Post)

    This stunning earrings project combines Swarovski queen baguette crystals with cascades of wrapped loop dangles and stylish Nina Designs earring hooks. The bicone bead dangles highlight the tones tha ...

    Pieces of the Sky Cuff Bracelet Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsTwist open a 4mm jump ring, string it through the crystal link hole, and twist securely closed. Repeat with the opposite side of the crystal link. For best way ...

    Balancing Act Asymmetrical Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner Tips - Earring 1Attach a tiny heart charm to the end of an eye pin. String on a rose-peach pearl and form a simple loop on the end. Then attach to the the end link ...

    All Seeing COPPRclay® Bracelet Tutorial(Post)

    Created by: Joe HentgesDesigner TipsCreate the COPPRclay centerpiece according to the manufacturer's instructions. Like most other metal clays, COPPRclay must be fired in a kiln. COPPRclay shrinks ap ...

    Easy as Pie Napkin Ring Tutorial(Post)

    TierraCast's Wire Hoops aren't just for earrings and charm-holder pendants -- they're also a great size for napkin rings! Create autumn-themed napkin holders with TierraCast's limited-edition pumpkin ...

    Savannah Earrings Tutorial(Post)

    Created by: Megan HoldenDesigner TipsClean the inside of the rivoli settings with alcohol swabs, and allow to dry.Place a small drop of adhesive into the cup of each setting and lightly but firmly pr ...

    Red Light / Green Light Enamel Earrings(Post)

    Your Choice: They're balloons, streetlights or lollipops!  Created by: Summer Melaas and Polly Nobbs-LaRue   Designer TipsPunch a 1/16" hole in each blank, directly opposite the existing lo ...

    Geometric Chevron Earrings Tutorial(Post)

    These geometric, simplistic, edgy metallic long chain earrings feature double spike Swarovski crystals! The attention-grabbing, lightweight earrings look like a million bucks but, they are actually v ...

    Sonya Snow Skater Necklace Tutorial(Post)

    Created by: Amy Mickelson   Designer TipsCut the metal sheet to the desired size. File the edges smooth and punch holes in corners and on the bottom. Sand the surfaces and clean.Place inked rubb ...

    Sunny Day Skull Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCreate skull dangles and outer-circle Size 6 E bead dangles with headpins, corrugated beads, and seed beads.For step-by-step direction on making head pin loops ...

    Lotus Drop Earring Tutorial(Post)

    Created by: Summer MelaasDesigner TipsCut approx. 2" of wire and make a simple loop or wire-wrapped loop at one end, but add the lotus flower charm before closing loop. Add 2 glass O beads, a crystal ...

    BeBop Blues Earrings Tutorial(Post)

    This project uses Swarovski crystal pearls. Created by: Cindy MorrisDesigner TipsSince you only need to make simple loops and open/close jump rings, these earrings are a perfect project to make on th ...

    Pawrific Enamel Necklace Tutorial(Post)

    Created by: Summer MelaasDesigner TipsPunch a hole in the top corners of your copper blank. File any sharp bits.Clean your blank very well with warm water and Penny Brite.Cut your 22 ga bare copper w ...

    I love My Dog Bracelet Tutorial(Post)

    Created by: TierraCastDesigner TipsPre-stretch cord by pulling firmly from both ends a few times.Attach small binder clip or bead stopper 2-3" from one end of stretch cord.On other end of cord string ...

    Unpretentious Princess Earrings Tutorial(Post)

    Created by: Janet BoyingtonThe star of the show, is the Princess-cut pendant! These sweet earrings are elegant and petite. Want to make a larger, flashier pair earrings, or use different colors? Clic ...

    Tangerine Sunrise Earrings Tutorial(Post)

    Created by: Summer Melaas   Designer TipsCut 3" of 26g sterling silver wire. Add 5 Indicolite (dark turquoise) 3mm crystals to the middle of the wire. Use chain nose pliers and bend wire to a 90 ...

    Rustic & Fabulous Stretch Bracelets (Post)

    Created by: Guest Designer Deb FlorosSuggested Supplies 1 #26-840-36-AC Antique Copper Plated Shallow Bead Cap, 4.2mm - Special Purchase (strand)1 #1-625-5023/s Faceted Crow Beads 6 x 4mm (2.5mm hol ...

    Scrap Chain Tassel Earring Tutorial(Post)

    Created by: Amy Mickelson   Designer TipsIf you buy spools of chain for various projects, you inevitably end up with scrap pieces. These left overs are too short for necklaces or maybe too fine ...

    Moving Forward Wrapped Bracelet Tutorial(Post)

    Created by: Amy MickelsonDesigner TipsChoose a color of hand dyed silk ribbon to go with your choice of 4mm Swarovski bicones and rivoli stones.Use 2-part epoxy to glue the rivoli stone into a rivoli ...

    Simple Leather Leaf Bracelet(Post)

    Created by: Guest Designer Deb FlorosSuggested Supplies 1 #61-130-05-01 Greek Leather Cord, 1.5mm, 5 Meter - Natural (Each)2 #F1CC-6RNR Nunn Design Antique Copper-Plated Pewter 27mm Metal Tube Bead1 ...

    April in Mind Tutorial(Post)

    You might think that mixing these textures wouldn't work, but they look great together! As they move, the larger link shines, and the tiny link sparkles. The CZ charm WAS available in Jet + all 12 bi ...

    Avocado Dorado Cuff Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsSolder Brass Ninja Star* to Copper Disk:If the copper or brass shapes are bent, straighten them with a steel block and nylon or rawhide mallet. (Solder doesn ...

    Tears of an Angel Earrings Tutorial(Post)

    Created by: Mandi DingmanDesigner TipsCut two 16-18" pieces of 24-gauge wire. It is better to have plenty of wire for wire-wrapping the pendants, depending on how much of the crystal you want to cove ...

    Golden Buzzer Charm Tutorial(Post)

    Created by: Janet BoyingtonDesigner TipsThis 10mm charm is perfect for showcasing a 6mm stamped impression.Gold-fill is harder than sterling or pewter, but not as hard as nickel silver.Place your cha ...

    Rings & Things Jewelry Blog(Page)

    Welcome to the Rings-Things blog! We are a world-leading supplier of jewelry-making supplies, offering top-quality products and services to help jewelry makers create beautiful, unique pieces. Whethe ...

Products (0)

Filters
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Total: items /

Adding your products to cart