null

614 results for '5 6mm O D 4mm I D 20 Gauge Enameled Copper Jump Rings'

Suggestions:

Categories

News & Information (614)

    Jump Ring Hint(Post)

    When you open and close jump rings, twist ends instead of "ovaling" them.This keeps their round shape better, which makes them easier to close neatly and securely.Many people find it easier to grip j ...

    5 Minute Rings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsCut a 20-gauge or 24-gauge 0.25" (wide) strip of copper, brass or sterling sheet approximately 2.75" long.Smooth and straighten with a nylon hammer.Optional: ...

    Go Round-and-Round Enameled-Copper Earrings Tutorial(Post)

    Created by: Mollie Valente Designer TipsMake two enameled copper washers. You can either use the enamel colors of your choice, or the colors listed in the suggested materials. Follow instruction ...

    Jet Scarab Copper Ring Tutorial(Post)

    Depending on the beads you use, this quick and easy unisex design can go from frilly and feminine to macho and masculine.  Created by: Michelle Horning   Designer TipsFor step-by-step instr ...

    Copper Sands Earrings Tutorial(Post)

    Created by: Tiffany White Designer TipsOne meter of this chain will make approximately 9-10 pairs of earrings!Place all the crystals onto the head pins and secure with wrapped loops. (New to jew ...

    Enameled Yellow Submarine Tutorial(Post)

    2018 was the 50th Anniversary of the Beatles' Yellow Submarine! Create your own yellow submarine using bright opaque vitreous (glass) enamels on copper sheet.  Created by: Polly Nobbs-LaRue &nbs ...

    Enameled Hidden Heart Tutorial(Post)

    Created by: Mollie ValenteMake your Enamel DiskUse the dapping set to dome the copper blank.(See Rings & Things blog post: How to Dap and Dome Metal Jewelry.)Fire the concave (back side) of the c ...

    Enameled Orchid Eye Tutorial(Post)

    Created by: Mollie Valente Make your Enamel DiskUse the dapping set to dome the copper blank. (See Rings & Things blog post: How to Dap and Dome Metal Jewelry.)Fire the concave (back side) o ...

    Delightfully Dotty Enameled Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCut copper sheet to size or use a premade copper blank. If you have cut your own blank, punch hole in appropriate location and file edges to remove roughness.C ...

    Bowl of Peaches Earrings - Tutorial(Post)

    Learn to make sweet earrings with a dapped set of disks in sterling and copper. A tumbler REALLY gets these domed disks shiny! They are reflecting so much light back, that the Rose Peach crystals loo ...

    Double Wrap Hammered Rings Tutorial(Post)

    Depending on the beads you use, this quick and easy unisex design can go from frilly and feminine to macho and masculine.Created by: Michelle HorningDesigner TipsFor step-by-step instructions, see th ...

    Geared Ring Tutorial(Post)

     Created by: Polly Nobbs-LaRue Designer TipsCut a strip of 20-gauge sheet 2.75" long. Smooth and straighten with a nylon hammer.Optional: Texture or stamp (see "How to Make a Metal-Stamped ...

    An Ode to Ojo Earrings Tutorial(Post)

    Created by: Lindsey GreenDesigner TipsBrushing steel wool lightly over the copper blanks gives them a nice shine and textured look.Free Technique Sheets & How-TosBasic Jewelry-Making Technique Sh ...

    Swirly Hammered Wire Rings Tutorial(Post)

    Created by: Michelle HorningDesigner TipsSee Rustic Wire Ring blog article for illustrated step-by-step instructions for making this style of ring.Hide the cut ends of the finer gauge of wire, on the ...

    Sun Tea Enameled Pendant Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsClean the blank with Penny Brite per package instructions. Rinse thoroughly and avoid touching further.Spray klyr fire onto blank, and sift on a base coat of w ...

    Dark Skies Enameled Pendant Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsUse dapping block to shape blank.After dapping, punch 1/16" hole using the smaller (silver) side of a EuroTool "helicopter" punch.Clean blank with penny brite ...

    Red Bird Enameled Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsPosition and emboss pattern on blanks with the Big Shot Jewelry Studio and embossing die. (See Big Shot Embossing blog article)Counter-enamel the blank (fire t ...

    Captured Aventurine Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Coil the wire around a 14- ...

    Sparkle Motion Gypsy Ring Tutorial(Post)

    Created by: Laurel NewnhamWe no longer carry the 3-loop ring blank in silver plate, but we do still have some in gold plate, so we've linked the parts for a gold version of this ring as well as silve ...

    Ring Around the Rosies Earring Tutorial(Post)

    The TierraCast Dulce Vida rings are reversible, with a different design on each side. If you wish the earrings to match, face the rings in the same direction during assembly.Created by: Rita Hutchins ...

    Astral Love Resin Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsSee instruction page for making no-solder bezels.Cut paper to match bezel wire shape.Seal paper and adhere to inside of bezel.Mix a small batch of resin and po ...

    Go Fly A Kite Enameled Earrings Tutorial(Post)

    Created by: Summer Melaas Designer TipsCarefully mark spots for holes, and use smaller end of EuroTool "helicopter" punch to add holes to corners of copper blanks.Clean the blank with Penny Brit ...

    Unfurled Copper and Oval Gemstone Necklace Tutorial(Post)

    Created by: Cindy MorrisDesigner TipsSince the gemstones are fairly heavy, use two crimp beads for extra security. Flatten crimps with flat-nose pliers.Use two jump rings for the "S" hook to connect ...

    Dumortierite and Copper Coin Necklace Tutorial(Post)

    Created by: Dee MuellerDesigner TipsCreate bead connectors with the 8mm rondelles and 14mm faceted round beads.Cut eight 1" pieces of chain. With jump rings attach two pieces of chain to each of six ...

    Titanium Octagon Key Ring Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsThese flat-wire octagonal titanium key rings have a nice look and feel, and the octagon Swarovski Strass crystal continues the geometry. (If you it's crazy t ...

    Chainmaille-Style Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsThis project has step-by-step illustrated instructions in our blog: How To Make Chainmaille-Style EarringsSuggested Supplies1 ounce (use 8 pieces) #37-178-1 Whi ...

    Leather Petal Earrings Tutorial(Post)

    You may have seen some fun leather earrings cut out in the shape of a petal. Why not take it a step further and add some extra pizazz! Just adding some chain and a couple of crystals gives them a lit ...

    La Terre Threader Earrings Tutorial(Post)

    Created by: Summer Melaas Designer TipsOpen a jump ring.New to jewelry-making? See Basic Jewelry-Making Technique Sheet (PDF) for most secure way to open and close jump rings.Add an opal charm to the ...

    Aqua Love Necklace Tutorial(Post)

    Created by: Cindy MorrisDesigner TipsString necklace and finish ends following directions in Beading Cable How-To Sheet below. Use Wire Guardians for a professional finish at the ends of yo ...

    Arrow - Etched Copper Bracelet Tutorial(Post)

    Created by: Summer MelaasDesigner TipsOptional: Punch a hole in the corner of the blank, following instructions in hole-punch below. After completing bracelet, dangle a charm or beaded dangle of your ...

    Fashion and Function Pin Cushion Ring Tutorial(Post)

    Created by: Amy Mickelson Designer TipsCreate a cardboard template 2.5 times the diameter of the bezel (approximately 2.25" for this ring).Using a doubled 36" piece of sewing thread, knotted at ...

    Kilauea Nights Earring Tutorial(Post)

    This stunning earrings project combines Swarovski queen baguette crystals with cascades of wrapped loop dangles and stylish Nina Designs earring hooks. The bicone bead dangles highlight the tones tha ...

    Wickedly Simple Wire Wrapped Ring Tutorial(Post)

    Created by: Michelle HorningDesigner TipsFor step-by-step instructions -- with detailed photographs -- for making wickedly simple wire-wrapped rings with beads and 22-gauge wire, see our tutorial at ...

    GO TEAM! Seahawks Colors Key Ring(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsAdd a jump ring to the football charm. For best way to open and close loops, see Jump Ring Hint in Jewelry Basics 101 (PDF)Slide the team color charms and th ...

    Feathered Fabulous Dangly Earrings(Post)

    Created by: Guest Designer Deb FlorosSuggested Supplies1 #44-153-9 17x25mm Gunmetal Triangle Filigree (12 Pieces)6 #44-940-81-GM TierraCast Black Gunmetal Plated Small Feather Charm (Each)1 #34-061-1 ...

    Matte Satin Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsStart with plenty of 26-gauge wire, and anchor wire to one side of arc connector. Add 4mm beads and extra lashes between each bead. Finish off the end with add ...

    Simple Leather Leaf Bracelet(Post)

    Created by: Guest Designer Deb FlorosSuggested Supplies 1 #61-130-05-01 Greek Leather Cord, 1.5mm, 5 Meter - Natural (Each)2 #F1CC-6RNR Nunn Design Antique Copper-Plated Pewter 27mm Metal Tube Bead1 ...

    Gianni's Garden Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsMeasure, mark and punch the hanging holes: 3 holes spaced to match the loops of the triangle, and one hole on the bottom.Use a rubber stamp of your choice and t ...

    Fit for a Queen Ring Tutorial(Post)

    This simple project features crystal rivoli stones and 1-time adjustable ring blanks with a bezel setting. Created by: Amy Mickelson Steps to Make These RingsWhile most colors of Swarovski ...

    Dragonfly Drop Earrings(Post)

    Created by: PRESTIGE CrystalSuggested Supplies 1 #37-295-460 Sterling Silver Jump Ring, Round - 6mm, 20.5-gauge (10 Pieces)1 #34-569-04 TierraCast Sterling Silver Earring Hook with 2mm Bead (pair)1 ...

    Purple Pillow Ring Tutorial(Post)

    Created by: Rita Hutchinson  Designer TipsUse the ring as a template to cut the image or decorative paper to the correct size.Seal front and back of the image with a waterproof barrier before ap ...

    Balancing Act Asymmetrical Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner Tips - Earring 1Attach a tiny heart charm to the end of an eye pin. String on a rose-peach pearl and form a simple loop on the end. Then attach to the the end link ...

    Chasing the Golden Moon Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCut 2 lengths of wire, each about 30" long. You want enough to lash all the crystals, but not so much that the wire is in the way.Anchor 26-gauge wire to the h ...

    Sonya Snow Skater Necklace Tutorial(Post)

    Created by: Amy Mickelson   Designer TipsCut the metal sheet to the desired size. File the edges smooth and punch holes in corners and on the bottom. Sand the surfaces and clean.Place inked rubb ...

    BeDazzled Slinky Bracelet Tutorial(Post)

    Created by: Sondra BarringtonDesigner TipsUse 7 coils of anklet size to make this bracelet bangle. You can adjust the size of wire and numbers of coils any way you wish.Do not use your favorite jewel ...

    Candara Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRue   Designer Tips  Unspool approximately 26" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Use ring-be ...

    Simple Elegance Earrings Tutorial(Post)

    Created by: Summer Melaas   Designer TipsOpen loop at bottom of ear wire. For best way to open and close loops, see Jump Ring Hint in Jewelry Basics 101 (PDF),Slide one connector onto the ear wi ...

    Easy as Pie Napkin Ring Tutorial(Post)

    TierraCast's Wire Hoops aren't just for earrings and charm-holder pendants -- they're also a great size for napkin rings! Create autumn-themed napkin holders with TierraCast's limited-edition pumpkin ...

    Hydrangea Blossom Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsTwist a jump ring to open it extra wide.Loop the jump ring around a single pearl in the pearl ball bead.Attach the loop of a French hook ear wire to the jump ri ...

    Circles in the Sand Necklace Tutorial(Post)

    This is a lovely summery design with secure wire-wrapped links, and can also double as  November birthstone jewelry (citrines) or June (pearls).Created by: Veronica Greenwood Designer TipsU ...

    Northern Copperhead Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Make 6 equal sized coils u ...

    A Ring A Day...(Post)

    A ring a day keeps the doctor away: Chase the winter blues away with this trio of tropical colored rings!Designer TipsUsing the ring finding, place one fancy stone inside setting. Using nylon-jaw pli ...

    99 Luftballons Tutorial(Post)

    ok, so maybe it's just 2 Red Balloons, not 99...Created by: Summer Melaas and Polly Nobbs-LaRue   Designer TipsPunch a 1/16" hole in each blank, directly opposite the existing loop or hole.Clean ...

    Cumulus Threader Earrings Tutorial(Post)

    Created by: Mollie Valente Designer TipsTwist a jump ring to open it extra wide.Loop the jump ring around a single pearl in the pearl ball bead.Attach the loop of an ear thread to the jump ring.Twist ...

    Boho Barbie Earrings Tutorial(Post)

    Created by: Laurel NewnhamDesigner TipsCut wire into two 16" lengths, one for each earring. Trim excess as needed.Hold wire tightly to create loops that are closer together.Experiment with the positi ...

    Have It Your Way | Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRue   I couldn't decide whether I liked the longer earrings, or the shorter (layered) design - so I went with both! The shorter design would also be great as a pendant ...

    Poppy Field Pendant Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsSelect and clean two matching glass pieces.Select an image and cut it to match the glass shape and size.Carefully wrap the glass with copper-foil tape. To creat ...

    Golden Lotus Bracelet Tutorial(Post)

    Created by: Summer MelaasDesigner TipsFor step-by-step instructions on crimping, wire wrapping and using jump rings, see Jewelry Basics 101 (PDF).Place a wire guard on the hammered round link.Crimp a ...

    Tamed Urchin Ring Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCenter the stone in the ring setting and gently squeeze in prongs (with your hands or pliers) working from opposite sides to keep the stone centered. Once the ...

    Metal Etching 101(Post)

    Etching is a method of using chemicals to cut a design or pattern into a metal surface. Etching your own designs into metal is easier than it may sound, and it can be a fun and rewarding way to make ...

    The Grass is Always Greener Ring Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsCut the glass to fit the bezel and wet sand to smooth the edges.Clean the glass and ring with rubbing alcohol and glue with two-part epoxy.Place the ring on a l ...

    Lady-Leg Etched Earrings Tutorial(Post)

    These fun etched copper earrings were cut out with shears (a jeweler's saw would also work great) and then the resist was hand-drawn with Sharpie, in the patterns of toes and thigh-high stockings.Cre ...

    Christmas Cluster Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsWire wrap all the metal, pearl and crystal beads before assembling.For each earring, Rita used 18 - 4mm crystal bicones in mixed reds, greens and whites, 6 - 3 ...

    Moving Forward Wrapped Bracelet Tutorial(Post)

    Created by: Amy MickelsonDesigner TipsChoose a color of hand dyed silk ribbon to go with your choice of 4mm Swarovski bicones and rivoli stones.Use 2-part epoxy to glue the rivoli stone into a rivoli ...

    Fresh Pots Bracelet Tutorial(Post)

    Created by: Jaci BostonDesigner TipsUse silhouettes of multiple teapots and teacups to make this design. No two are alike.Use rubber cement to glue the paper images to the metal.Saw vertically at all ...

    Summer Rain Bracelet Tutorial(Post)

    Created by: Veronica GreenwoodDesigner TipsPlace a wire guard on the round link and crimp a 10-inch piece of flex wire through the wire guard (see Jewelry Basics 101 - PDF).String one each in this or ...

    Tangerine Ring Tutorial(Post)

    Created by: Veronica GreenwoodDesigner TipsPlace the 12mm rivoli in the bezel setting.Using the nylon-jaw pliers, gently push the prongs down over the crystal, starting with the top left prong, next ...

    Southwest Chandelier Earrings Tutorial(Post)

    Created by: Rita Hutchinson. Designer TipsWhen you trim the eye pins on the 3 bead sections, retain two of the pieces to use for the shorter 2 bead section instead of using another whole eye pin.Open ...

    Golden Buzzer Charm Tutorial(Post)

    Created by: Janet BoyingtonDesigner TipsThis 10mm charm is perfect for showcasing a 6mm stamped impression.Gold-fill is harder than sterling or pewter, but not as hard as nickel silver.Place your cha ...

    Spanish Rose Earrings Tutorial(Post)

    3mm and 4mm gemstone beads have notoriously small holes, so they rarely work with standard-diameter head pins. We highly recommend wrapped loops rather than simple loops, with the thinner-gauge wire ...

    Passion Play Toursade Tutorial(Post)

    Created by: The Swarovski Crystal CREATE YOUR STYLE Design TeamDesigner TipsCut stringing cable into three 24"" pieces.Add a bead stopper to one end of a 24"" stringing cable. Slide on one 4mm 5328 C ...

    The North Star Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsCreate a bail using a 5/16" x 3" piece of 24-gauge copper sheet: Cut, file, stamp, punch and ream the holes a bit larger. Use bail-making pliers to bend the sta ...

    Promise Pin Tutorial(Post)

    Created by: Mollie Valente Designer TipsUse 26-gauge wire to lash the beads to the pin back.Cut the chain into two pieces: 5-1/2" and 6-1/2" in length.Use 6mm jump rings to attach the chain to the pi ...

    Aqua Flower Crystal Earrings Tutorial(Post)

    Learn to make these sweet gold-filled chain tassel and link/hoop earrings, featuring Swarovski Edelweiss pendants, with parts that have been tested to work together!Created by: Tiffany WhiteDesigner ...

    Naughty or Nice Bracelet Tutorial(Post)

    A variation on a jewelry kit by TierraCastDesigner TipsCut a 6-8" length of the red pebble cord, add a small dab of superglue to one of the ends plus drag a small amount of glue around the sides of t ...

    Patriotic Drops Earrings Tutorial(Post)

    Created by: Amy ScaliseDesigner TipsUse the 1-Step Looper to create 36 (12 of each color) crystal pearl dangles.Cut two 1" pieces of chain and attach approximately 2 dangles per link directly onto th ...

    Blooming Lotus Earrings Tutorial(Post)

    Created by: Mollie Valente Designer TipsAttach the eye pin loop to the crystal pear charm (twist loop open and closed).String on beads in the following order: 3mm silver-plated heishi bead, ...

    Pretty in Pink Bracelet Tutorial(Post)

    Created by: The Swarovski Design Team Designer TipsFor best way to open and close loops, see Jump Ring Hint in Jewelry Basics 101 (PDF). Suggested Supplies1 6-pack #02-088-34-182  ...

    Golden Halos Earrings Tutorial(Post)

    Due to the popularity of 10mm cushion square settings, we've included links to alternate styles below in case the primary setting used in the Golden Halos earrings is temporarily unavailable.  C ...

    I Love My Cat Bracelet Tutorial(Post)

    Created by: Tracy Proctor of TierraCastDesigner TipsPre-stretch cord by pulling firmly from both ends a few times.Attach small binder clip or bead stopper 2-3” from one end of stretch cord.On other e ...

    TierraCast Monstera Trio Bracelet Tutorial(Post)

    Created by: TierraCastDesigner TipsCut cord into 3 12" pieces. String one button onto each cord, then string 3 hole bars and barrel beads. Position as desired, then lightly crimp barrel beads in plac ...

    Together Cause Bracelet Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsString a bead cap, pastel pink pearl bead, and another bead cap onto the ball-end head pin and make a large wire-wrapped loop. Make the loop large enough, so t ...

    Geometric Chevron Earrings Tutorial(Post)

    These geometric, simplistic, edgy metallic long chain earrings feature double spike Swarovski crystals! The attention-grabbing, lightweight earrings look like a million bucks but, they are actually v ...

    Solje Style Wedding Earring Tutorial(Post)

    Created by: Amy MickelsonDesigner TipsUse jump rings to attach the oval charms to the loops on the filigree connector.Connect the filigree to the loop on the earring post with a 4.5mm jump ring.The f ...

    Herbaceous Polymer Ring Tutorial(Post)

    Created by: Jaci Boston Designer Tips Wash your hands thoroughly before handling the clay, since polymer clay tends to pick up any dirt and dander that may be hiding.Use a pasta machine to ...

    Satsuma Surprise Bracelet Tutorial(Post)

    Designer TipsUsing alcohol wipes, clean all the settings and set aside to dry.Using one flatback stone, glue into one setting and set aside for 24 hours to dry. Repeat 5 more times.Using one jump rin ...

    Twisted, Not Tangled, Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsThis 24.5"" necklace uses 26 twisty bar connectors. Adjust the finished length of the piece by adding or subtracting connectors.Connect all components together ...

    Savannah Earrings Tutorial(Post)

    Created by: Megan HoldenDesigner TipsClean the inside of the rivoli settings with alcohol swabs, and allow to dry.Place a small drop of adhesive into the cup of each setting and lightly but firmly pr ...

    Classic Bridal Earrings Tutorial(Post)

    Created by: Summer MelaasDesigner TipsAttach ear wire to top loop of filigree. For best way to open and close loops, see Jump Ring Hint in Jewelry Basics 101 (PDF).Use jump rings to attach the pear p ...

    Floral Intuition Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCreate wire wrapped link with Cacoxenite and Filigree Beads to attach Blossom charm to the shank of the button. New to jewelry-making? See Jewelry Basics 101 ( ...

    Pieces of the Sky Cuff Bracelet Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsTwist open a 4mm jump ring, string it through the crystal link hole, and twist securely closed. Repeat with the opposite side of the crystal link. For best way ...

    Little Spiral Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsThe extra jump rings used when hanging the cluster of charms on this necklace help keep the spiral charm facing forward.For instructions on making beaded head ...

    Cerulean Seas Pendant Tutorial(Post)

    Created by: Veronica GreenwoodDesigner TipsPlace 12mm rivoli in bezel setting and gently bend prongs over crystal using needle nose pliers.With a piece of 24-gauge wire, make a wrapped loop making su ...

    Silver Spray Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsWhen making a large number of beaded dangles, it is quickest to do them assembly line style. Figure out the correct length for the wire, and trim all wires, st ...

    Take Flight Bracelet Tutorial(Post)

    Created by: Bridget AustinDesigner TipsUse a small amount of E-6000 adhesive to glue one cord end onto the cording.Using a head pin, slide on one spacer bead, an apatite pebble bead and one more spac ...

    4th of July Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsCenter a stone in a setting and gently squeeze prongs in (with your fingers or pliers) working from opposite sides to keep the stone centered. Once the prong ...

    Falling Snow Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsBlue Shade crystal snowflakes are coated on one side. Check the pendants carefully to hang both crystals in the same direction.Due to the thickness of the crys ...

    Red Light / Green Light Enamel Earrings(Post)

    Your Choice: They're balloons, streetlights or lollipops!  Created by: Summer Melaas and Polly Nobbs-LaRue   Designer TipsPunch a 1/16" hole in each blank, directly opposite the existing lo ...

    Lotus Drop Earring Tutorial(Post)

    Created by: Summer MelaasDesigner TipsCut approx. 2" of wire and make a simple loop or wire-wrapped loop at one end, but add the lotus flower charm before closing loop. Add 2 glass O beads, a crystal ...

    Rings & Things Jewelry Blog(Page)

    Welcome to the Rings-Things blog! We are a world-leading supplier of jewelry-making supplies, offering top-quality products and services to help jewelry makers create beautiful, unique pieces. Whethe ...

Products (0)

Filters
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Total: items /

Adding your products to cart