null

620 results for '5 6mm O D 3 5mm I D 18 Gauge Enameled Copper Jump Rings'

Suggestions:

Categories

News & Information (620)

    Jump Ring Hint(Post)

    When you open and close jump rings, twist ends instead of "ovaling" them.This keeps their round shape better, which makes them easier to close neatly and securely.Many people find it easier to grip j ...

    Go Round-and-Round Enameled-Copper Earrings Tutorial(Post)

    Created by: Mollie Valente Designer TipsMake two enameled copper washers. You can either use the enamel colors of your choice, or the colors listed in the suggested materials. Follow instruction ...

    5 Minute Rings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsCut a 20-gauge or 24-gauge 0.25" (wide) strip of copper, brass or sterling sheet approximately 2.75" long.Smooth and straighten with a nylon hammer.Optional: ...

    Jet Scarab Copper Ring Tutorial(Post)

    Depending on the beads you use, this quick and easy unisex design can go from frilly and feminine to macho and masculine.  Created by: Michelle Horning   Designer TipsFor step-by-step instr ...

    Enameled Orchid Eye Tutorial(Post)

    Created by: Mollie Valente Make your Enamel DiskUse the dapping set to dome the copper blank. (See Rings & Things blog post: How to Dap and Dome Metal Jewelry.)Fire the concave (back side) o ...

    Dark Skies Enameled Pendant Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsUse dapping block to shape blank.After dapping, punch 1/16" hole using the smaller (silver) side of a EuroTool "helicopter" punch.Clean blank with penny brite ...

    Enameled Hidden Heart Tutorial(Post)

    Created by: Mollie ValenteMake your Enamel DiskUse the dapping set to dome the copper blank.(See Rings & Things blog post: How to Dap and Dome Metal Jewelry.)Fire the concave (back side) of the c ...

    Captured Aventurine Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Coil the wire around a 14- ...

    Double Wrap Hammered Rings Tutorial(Post)

    Depending on the beads you use, this quick and easy unisex design can go from frilly and feminine to macho and masculine.Created by: Michelle HorningDesigner TipsFor step-by-step instructions, see th ...

    Enameled Yellow Submarine Tutorial(Post)

    2018 was the 50th Anniversary of the Beatles' Yellow Submarine! Create your own yellow submarine using bright opaque vitreous (glass) enamels on copper sheet.  Created by: Polly Nobbs-LaRue &nbs ...

    Delightfully Dotty Enameled Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCut copper sheet to size or use a premade copper blank. If you have cut your own blank, punch hole in appropriate location and file edges to remove roughness.C ...

    Sun Tea Enameled Pendant Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsClean the blank with Penny Brite per package instructions. Rinse thoroughly and avoid touching further.Spray klyr fire onto blank, and sift on a base coat of w ...

    Chainmaille-Style Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsThis project has step-by-step illustrated instructions in our blog: How To Make Chainmaille-Style EarringsSuggested Supplies1 ounce (use 8 pieces) #37-178-1 Whi ...

    Go Fly A Kite Enameled Earrings Tutorial(Post)

    Created by: Summer Melaas Designer TipsCarefully mark spots for holes, and use smaller end of EuroTool "helicopter" punch to add holes to corners of copper blanks.Clean the blank with Penny Brit ...

    An Ode to Ojo Earrings Tutorial(Post)

    Created by: Lindsey GreenDesigner TipsBrushing steel wool lightly over the copper blanks gives them a nice shine and textured look.Free Technique Sheets & How-TosBasic Jewelry-Making Technique Sh ...

    Copper Sands Earrings Tutorial(Post)

    Created by: Tiffany White Designer TipsOne meter of this chain will make approximately 9-10 pairs of earrings!Place all the crystals onto the head pins and secure with wrapped loops. (New to jew ...

    Geared Ring Tutorial(Post)

     Created by: Polly Nobbs-LaRue Designer TipsCut a strip of 20-gauge sheet 2.75" long. Smooth and straighten with a nylon hammer.Optional: Texture or stamp (see "How to Make a Metal-Stamped ...

    Red Bird Enameled Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsPosition and emboss pattern on blanks with the Big Shot Jewelry Studio and embossing die. (See Big Shot Embossing blog article)Counter-enamel the blank (fire t ...

    Fashion and Function Pin Cushion Ring Tutorial(Post)

    Created by: Amy Mickelson Designer TipsCreate a cardboard template 2.5 times the diameter of the bezel (approximately 2.25" for this ring).Using a doubled 36" piece of sewing thread, knotted at ...

    Boho Barbie Earrings Tutorial(Post)

    Created by: Laurel NewnhamDesigner TipsCut wire into two 16" lengths, one for each earring. Trim excess as needed.Hold wire tightly to create loops that are closer together.Experiment with the positi ...

    Ring Around the Rosies Earring Tutorial(Post)

    The TierraCast Dulce Vida rings are reversible, with a different design on each side. If you wish the earrings to match, face the rings in the same direction during assembly.Created by: Rita Hutchins ...

    Dumortierite and Copper Coin Necklace Tutorial(Post)

    Created by: Dee MuellerDesigner TipsCreate bead connectors with the 8mm rondelles and 14mm faceted round beads.Cut eight 1" pieces of chain. With jump rings attach two pieces of chain to each of six ...

    Arrow - Etched Copper Bracelet Tutorial(Post)

    Created by: Summer MelaasDesigner TipsOptional: Punch a hole in the corner of the blank, following instructions in hole-punch below. After completing bracelet, dangle a charm or beaded dangle of your ...

    Aqua Love Necklace Tutorial(Post)

    Created by: Cindy MorrisDesigner TipsString necklace and finish ends following directions in Beading Cable How-To Sheet below. Use Wire Guardians for a professional finish at the ends of yo ...

    Bowl of Peaches Earrings - Tutorial(Post)

    Learn to make sweet earrings with a dapped set of disks in sterling and copper. A tumbler REALLY gets these domed disks shiny! They are reflecting so much light back, that the Rose Peach crystals loo ...

    Swirly Hammered Wire Rings Tutorial(Post)

    Created by: Michelle HorningDesigner TipsSee Rustic Wire Ring blog article for illustrated step-by-step instructions for making this style of ring.Hide the cut ends of the finer gauge of wire, on the ...

    Astral Love Resin Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsSee instruction page for making no-solder bezels.Cut paper to match bezel wire shape.Seal paper and adhere to inside of bezel.Mix a small batch of resin and po ...

    GO TEAM! Seahawks Colors Key Ring(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsAdd a jump ring to the football charm. For best way to open and close loops, see Jump Ring Hint in Jewelry Basics 101 (PDF)Slide the team color charms and th ...

    99 Luftballons Tutorial(Post)

    ok, so maybe it's just 2 Red Balloons, not 99...Created by: Summer Melaas and Polly Nobbs-LaRue   Designer TipsPunch a 1/16" hole in each blank, directly opposite the existing loop or hole.Clean ...

    Sparkle Motion Gypsy Ring Tutorial(Post)

    Created by: Laurel NewnhamWe no longer carry the 3-loop ring blank in silver plate, but we do still have some in gold plate, so we've linked the parts for a gold version of this ring as well as silve ...

    Unfurled Copper and Oval Gemstone Necklace Tutorial(Post)

    Created by: Cindy MorrisDesigner TipsSince the gemstones are fairly heavy, use two crimp beads for extra security. Flatten crimps with flat-nose pliers.Use two jump rings for the "S" hook to connect ...

    Candara Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRue   Designer Tips  Unspool approximately 26" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Use ring-be ...

    Lady-Leg Etched Earrings Tutorial(Post)

    These fun etched copper earrings were cut out with shears (a jeweler's saw would also work great) and then the resist was hand-drawn with Sharpie, in the patterns of toes and thigh-high stockings.Cre ...

    A Ring A Day...(Post)

    A ring a day keeps the doctor away: Chase the winter blues away with this trio of tropical colored rings!Designer TipsUsing the ring finding, place one fancy stone inside setting. Using nylon-jaw pli ...

    Red Light / Green Light Enamel Earrings(Post)

    Your Choice: They're balloons, streetlights or lollipops!  Created by: Summer Melaas and Polly Nobbs-LaRue   Designer TipsPunch a 1/16" hole in each blank, directly opposite the existing lo ...

    Titanium Octagon Key Ring Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsThese flat-wire octagonal titanium key rings have a nice look and feel, and the octagon Swarovski Strass crystal continues the geometry. (If you it's crazy t ...

    Purple Pillow Ring Tutorial(Post)

    Created by: Rita Hutchinson  Designer TipsUse the ring as a template to cut the image or decorative paper to the correct size.Seal front and back of the image with a waterproof barrier before ap ...

    Fit for a Queen Ring Tutorial(Post)

    This simple project features crystal rivoli stones and 1-time adjustable ring blanks with a bezel setting. Created by: Amy Mickelson Steps to Make These RingsWhile most colors of Swarovski ...

    Peaceful Thoughts Lotus Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner Tips - Part 1: Prepare ComponentsDisassemble the metal mesh choker necklace and temporarily set aside the lobster clasp and metal mesh chain. For best way to open a ...

    Twisted, Not Tangled, Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsThis 24.5"" necklace uses 26 twisty bar connectors. Adjust the finished length of the piece by adding or subtracting connectors.Connect all components together ...

    Wickedly Simple Wire Wrapped Ring Tutorial(Post)

    Created by: Michelle HorningDesigner TipsFor step-by-step instructions -- with detailed photographs -- for making wickedly simple wire-wrapped rings with beads and 22-gauge wire, see our tutorial at ...

    Easy as Pie Napkin Ring Tutorial(Post)

    TierraCast's Wire Hoops aren't just for earrings and charm-holder pendants -- they're also a great size for napkin rings! Create autumn-themed napkin holders with TierraCast's limited-edition pumpkin ...

    4th of July Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsCenter a stone in a setting and gently squeeze prongs in (with your fingers or pliers) working from opposite sides to keep the stone centered. Once the prong ...

    Take Flight Bracelet Tutorial(Post)

    Created by: Bridget AustinDesigner TipsUse a small amount of E-6000 adhesive to glue one cord end onto the cording.Using a head pin, slide on one spacer bead, an apatite pebble bead and one more spac ...

    Blue Halo Earrings Tutorial(Post)

    Created by: Veronica GreenwoodDesigner TipsPlace the crystal in the bezel setting and using the nylon jaw flat pliers gently fold the prongs down over the crystal.Using the 6.5mm jump ring attach the ...

    Leather Petal Earrings Tutorial(Post)

    You may have seen some fun leather earrings cut out in the shape of a petal. Why not take it a step further and add some extra pizazz! Just adding some chain and a couple of crystals gives them a lit ...

    Have It Your Way | Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRue   I couldn't decide whether I liked the longer earrings, or the shorter (layered) design - so I went with both! The shorter design would also be great as a pendant ...

    Feathered Fabulous Dangly Earrings(Post)

    Created by: Guest Designer Deb FlorosSuggested Supplies1 #44-153-9 17x25mm Gunmetal Triangle Filigree (12 Pieces)6 #44-940-81-GM TierraCast Black Gunmetal Plated Small Feather Charm (Each)1 #34-061-1 ...

    Tangerine Ring Tutorial(Post)

    Created by: Veronica GreenwoodDesigner TipsPlace the 12mm rivoli in the bezel setting.Using the nylon-jaw pliers, gently push the prongs down over the crystal, starting with the top left prong, next ...

    Simple Leather Leaf Bracelet(Post)

    Created by: Guest Designer Deb FlorosSuggested Supplies 1 #61-130-05-01 Greek Leather Cord, 1.5mm, 5 Meter - Natural (Each)2 #F1CC-6RNR Nunn Design Antique Copper-Plated Pewter 27mm Metal Tube Bead1 ...

    Gianni's Garden Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsMeasure, mark and punch the hanging holes: 3 holes spaced to match the loops of the triangle, and one hole on the bottom.Use a rubber stamp of your choice and t ...

    Cumulus Threader Earrings Tutorial(Post)

    Created by: Mollie Valente Designer TipsTwist a jump ring to open it extra wide.Loop the jump ring around a single pearl in the pearl ball bead.Attach the loop of an ear thread to the jump ring.Twist ...

    The North Star Necklace Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsCreate a bail using a 5/16" x 3" piece of 24-gauge copper sheet: Cut, file, stamp, punch and ream the holes a bit larger. Use bail-making pliers to bend the sta ...

    Steel Empire Chain Maille Bracelet Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsThis is a variation of the standard Byzantine weave, called Byzantine with 3 connectors. I wanted to use all stainless steel for this bracelet, but the aspect ...

    La Terre Threader Earrings Tutorial(Post)

    Created by: Summer Melaas Designer TipsOpen a jump ring.New to jewelry-making? See Basic Jewelry-Making Technique Sheet (PDF) for most secure way to open and close jump rings.Add an opal charm to the ...

    Tamed Urchin Ring Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCenter the stone in the ring setting and gently squeeze in prongs (with your hands or pliers) working from opposite sides to keep the stone centered. Once the ...

    Briolette and Vine Earrings Tutorial(Post)

    Created by: Cindy MorrisDesigner TipsAdd a bead cap, 6mm aventurine gemstone bead, and another bead cap to the eye pin, and make a simple loop. New to jewelry-making? See Basic Jewelry-Making Techniq ...

    The Grass is Always Greener Ring Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsCut the glass to fit the bezel and wet sand to smooth the edges.Clean the glass and ring with rubbing alcohol and glue with two-part epoxy.Place the ring on a l ...

    Swinging Hearts Earrings Tutorial(Post)

    Created by: Amy Scalise. Design by: Swarovski's Create Your Style Design TeamDesigner TipsThese earrings are inspired by the CREATE YOUR STYLE design: "Mother´s Day Earrings: Swinging Hearts".Cut two ...

    Copper & Purple Love - Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner Tips Set link on leather bracelet, and use a sharp pencil, or fine-point non-smudging marker, to make a dot at each spot to punch.Rotate leather hole punch to s ...

    Sunny Day Skull Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCreate skull dangles and outer-circle Size 6 E bead dangles with headpins, corrugated beads, and seed beads.For step-by-step direction on making head pin loops ...

    Metal Etching 101(Post)

    Etching is a method of using chemicals to cut a design or pattern into a metal surface. Etching your own designs into metal is easier than it may sound, and it can be a fun and rewarding way to make ...

    Frippery Soldered Frame Pendant Necklace Tutorial(Post)

    Created by: Cindy MorrisDesigner TipsChoose 2 pieces of glass from the package and clean.NOTE: this design was created with 1.25" square glass, which is no longer available. 1" and 22mm replacements ...

    TierraCast Monstera Trio Bracelet Tutorial(Post)

    Created by: TierraCastDesigner TipsCut cord into 3 12" pieces. String one button onto each cord, then string 3 hole bars and barrel beads. Position as desired, then lightly crimp barrel beads in plac ...

    Avocado Dorado Cuff Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsSolder Brass Ninja Star* to Copper Disk:If the copper or brass shapes are bent, straighten them with a steel block and nylon or rawhide mallet. (Solder doesn ...

    Bermuda Crescent Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsCut 4 lengths of chain, each 4 links long.Use 4.5mm jump rings to attach chain to the top holes of the crescent link. For best way to open and close loops, see ...

    Matte Satin Necklace Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsStart with plenty of 26-gauge wire, and anchor wire to one side of arc connector. Add 4mm beads and extra lashes between each bead. Finish off the end with add ...

    Northern Copperhead Earrings Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsUnspool approximately 20" of copper wire. Pull it smooth with flat nylon-jaw pliers.Trim the end neatly (flush) with flush cutters.Make 6 equal sized coils u ...

    Pawrific Enamel Necklace Tutorial(Post)

    Created by: Summer MelaasDesigner TipsPunch a hole in the top corners of your copper blank. File any sharp bits.Clean your blank very well with warm water and Penny Brite.Cut your 22 ga bare copper w ...

    Golden Lotus Bracelet Tutorial(Post)

    Created by: Summer MelaasDesigner TipsFor step-by-step instructions on crimping, wire wrapping and using jump rings, see Jewelry Basics 101 (PDF).Place a wire guard on the hammered round link.Crimp a ...

    Belle Starr Leather and Turquoise Bracelet Tutorial(Post)

      Created by: Mollie Valente   Designer TipsStart with extra leather and thread, cutting off any excess is better than not having enough.For security, add additional stitches on the first a ...

    Frida's Hands Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsString the following beads onto a eye pin: 1 round corrugated-metal bead, 2 rubber wire keepers (these work as positioning beads for the large-hole Mirage bead) ...

    Golden Halos Earrings Tutorial(Post)

    Due to the popularity of 10mm cushion square settings, we've included links to alternate styles below in case the primary setting used in the Golden Halos earrings is temporarily unavailable.  C ...

    Sonya Snow Skater Necklace Tutorial(Post)

    Created by: Amy Mickelson   Designer TipsCut the metal sheet to the desired size. File the edges smooth and punch holes in corners and on the bottom. Sand the surfaces and clean.Place inked rubb ...

    Stars and Stripes Earrings Tutorial(Post)

    Created by: Kayla HeflingDesigner TipsAttach the French clip to the eye pin. See Basic Jewelry-Making Technique Sheet (PDF) for best way to open and close loops.Add bicones and briolette crystal to t ...

    Trisha Earrings Tutorial(Post)

    If you've never set faceted stones before, tube settings are a great way to get started.Created by: Rita HutchinsonDesigner TipsGolden Topaz is November's birthstone, and sparkling 4mm CZs are availa ...

    Sweeter Than Honey Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsFirst make a chain using 8mm jump rings and large-hole beads:Twist open a jump ring and string it through a large-hole bead and then close the jump ring.Open a ...

    Herbaceous Polymer Ring Tutorial(Post)

    Created by: Jaci Boston Designer Tips Wash your hands thoroughly before handling the clay, since polymer clay tends to pick up any dirt and dander that may be hiding.Use a pasta machine to ...

    Hydrangea Blossom Earrings Tutorial(Post)

    Created by: Mollie ValenteDesigner TipsTwist a jump ring to open it extra wide.Loop the jump ring around a single pearl in the pearl ball bead.Attach the loop of a French hook ear wire to the jump ri ...

    Tuli Tribal Necklace Tutorial(Post)

    Created by: Joe HentgesDesigner TipsThe hole size for these handmade pendants can be variable.Use a drill to enlarge the hole to accommodate a 13-gauge jump ring.Darken the bone inside the enlarged h ...

    All Seeing COPPRclay® Bracelet Tutorial(Post)

    Created by: Joe HentgesDesigner TipsCreate the COPPRclay centerpiece according to the manufacturer's instructions. Like most other metal clays, COPPRclay must be fired in a kiln. COPPRclay shrinks ap ...

    BeDazzled Slinky Bracelet Tutorial(Post)

    Created by: Sondra BarringtonDesigner TipsUse 7 coils of anklet size to make this bracelet bangle. You can adjust the size of wire and numbers of coils any way you wish.Do not use your favorite jewel ...

    Bermuda Triangle Earrings Tutorial(Post)

    No mysteries here, just a simple design with a stunning color effect. Bermuda Blue, with its intense flashes of teal and deep blues, has been one of our favorites from Swarovski since we first added ...

    Cerulean Seas Pendant Tutorial(Post)

    Created by: Veronica GreenwoodDesigner TipsPlace 12mm rivoli in bezel setting and gently bend prongs over crystal using needle nose pliers.With a piece of 24-gauge wire, make a wrapped loop making su ...

    Christmas Cluster Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsWire wrap all the metal, pearl and crystal beads before assembling.For each earring, Rita used 18 - 4mm crystal bicones in mixed reds, greens and whites, 6 - 3 ...

    Mehandi Coil Bracelet Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsUse shears to cut flat wire. Texture as desired with texturing hammer or metal stamps.Create coil by wrapping at an angle around large barrel of bail making pl ...

    Golden Buzzer Charm Tutorial(Post)

    Created by: Janet BoyingtonDesigner TipsThis 10mm charm is perfect for showcasing a 6mm stamped impression.Gold-fill is harder than sterling or pewter, but not as hard as nickel silver.Place your cha ...

    Mardi Gras Earrings Tutorial(Post)

    Created by: Tiffany WhiteDesigner TipsPlace one bead (glass, crystal or brass), on each headpin and secure with wrapped loops.Arrange the dangles onto the jump rings. Place two brass beads on first j ...

    Scrap Chain Tassel Earring Tutorial(Post)

    Created by: Amy Mickelson   Designer TipsIf you buy spools of chain for various projects, you inevitably end up with scrap pieces. These left overs are too short for necklaces or maybe too fine ...

    Interchangeable Bracelet Tutorial(Post)

    All chain and settings used below are in Antique Brass, but Silver Plate and Antique Copper settings are also available!Created by: Bridget AustinDesigner TipsUse chain nose pliers or a burnishing to ...

    Dragonfly Drop Earrings(Post)

    Created by: PRESTIGE CrystalSuggested Supplies 1 #37-295-460 Sterling Silver Jump Ring, Round - 6mm, 20.5-gauge (10 Pieces)1 #34-569-04 TierraCast Sterling Silver Earring Hook with 2mm Bead (pair)1 ...

    A Mustache For Your Wrist Cuff Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRueDesigner TipsAdjust bracelet to target wrist size/shape, because once the 2nd layer is riveted on, you will have limited adjustability.Texture or stamp the bracelet and/o ...

    Victoria - Etched Earrings Tutorial(Post)

    Created by: Summer MelaasDesigner TipsEtch earrings (See etching tutorial below).Place cushion in cushion setting and fold over tabs using nylon-jaw pliers or a burnisher.Attach French hooks to top o ...

    Falling Snow Earrings Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsBlue Shade crystal snowflakes are coated on one side. Check the pendants carefully to hang both crystals in the same direction.Due to the thickness of the crys ...

    October Ombre Bracelet Tutorial(Post)

    Created by: Rita HutchinsonDesigner TipsTexture and stamp the sterling heart with ribbon design stamp. New to metal stamping? See step-by-step instructions in our free Metal Stamping 101 PDF.Apply st ...

    Soldering 101(Post)

    Soldering (usually pronounced soddering) is the method of joining metal parts together, using another metal that has a lower melting temperature than the parts being joined.Solder is the portion that ...

    Holiday Lights Necklace Tutorial(Post)

    This sparkling "Christmas light" project is a fun, festive winter design to create with Swarovski crystal teardrop beads in colors of your choice.Created by: Rings & Things Staff Designer TipsAdd ...

    Bees and Blossoms Bangle Bracelet Tutorial(Post)

    Created by: Polly Nobbs-LaRue   Designer TipsOne of the things I love about this bangle bracelet, is that it's extra small, so fits me perfectly. However, that means it doesn't fit many other ad ...

    DIY Adjustable Bangle Bracelet Tutorial(Post)

    This style of bracelet is a great one-size-fits-all design. OK, so technically the same bracelet size won't fit both a petite 6-year-old and a Samoan warrior, but odds are that you can determine one ...

    Rings & Things Jewelry Blog(Page)

    Welcome to the Rings-Things blog! We are a world-leading supplier of jewelry-making supplies, offering top-quality products and services to help jewelry makers create beautiful, unique pieces. Whethe ...

Products (0)

Filters
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Total: items /

Adding your products to cart

View Cart Continue Shopping

Featured Products

Which Glue is Best? For the most durable bond, we almost always recommend epoxies rather than other types of glue, but it depends on a few factors... Check out the options, plus tips for successful glue bonds, on our Adhesives and Jewelry Glues page. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Which Glue is Best? For the most durable bond, we almost always recommend epoxies rather than other types of glue, but it depends on a few factors... Check out the options, plus tips for successful glue bonds, on our Adhesives and Jewelry Glues page. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Magnet, Round, 18mm (35 Pieces)

$9.67
Which Glue is Best? For the most durable bond, we almost always recommend epoxies rather than other types of glue, but it depends on a few factors... Check out the options, plus tips for successful...
Add to Cart
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help! See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

14kt Gold-Filled Lobster Clasp, 10mm (Each)

$2.64
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!
Add to Cart
Using a steel hammer on steel stamps, can damage (or even shatter!) your metal stamps, and is likely to bounce and give you the dreaded double impression. This is why we recommend always using brass hammers to hit steel stamps. Brass is a softer metal than steel, so don't worry when your brass hammer head gets dented (this is normal). See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

ImpressArt Metal Stamping Hammer, Stubby (Each)

ImpressArt

$20.80
Using a steel hammer on steel stamps, can damage (or even shatter!) your metal stamps, and is likely to bounce and give you the dreaded double impression. This is why we recommend always using brass...
Add to Cart
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

Leather Cuff Bracelet, 1" - Denim (Each)

$4.13
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!
Add to Cart
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help! See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!

Leather Wrap Bracelet, 1/2" - Natural (Each)

$7.23
See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Questions? E-mail us for friendly, expert help!
Add to Cart
Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm (inner diameter). To create an antiqued look on raw brass, apply an oxidizing solution. Raw brass is not quite as shiny as most plated finishes. To make your raw brass items shinier, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.If desired, add a sealant or glaze. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm (inner diameter). To create an antiqued look on raw brass, apply an oxidizing solution. Raw brass is not quite as shiny as most plated finishes. To make your raw brass items shinier, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.If desired, add a sealant or glaze. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

22mm Brass Filigree, Wavy Square (12 Pieces)

$1.05
Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm...
Add to Cart
Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm (inner diameter). To create an antiqued look on raw brass, apply an oxidizing solution. Raw brass is not quite as shiny as most plated finishes. To make your raw brass items shinier, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.If desired, add a sealant or glaze. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item. Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm (inner diameter). To create an antiqued look on raw brass, apply an oxidizing solution. Raw brass is not quite as shiny as most plated finishes. To make your raw brass items shinier, tumble-polish them with steel shot, water and a burnishing compound in a rock tumbler.If desired, add a sealant or glaze. See Related Products links (below) for similar items and additional jewelry-making supplies that are often used with this item.

Brass Filigree, Small, Oval, 4 Loops (12 Pieces)

$1.13
Inexpensive and versatile! Most stamped charms are one-sided, lightweight, and either flat or slightly domed. Size given is height x width and includes loop (if applicable). Most loops are 0.8-1.2mm...
Add to Cart